Clik here to view.
Beginner Basics • Re: HW-accelerated routing & firewall
I think your mixing up form and function.The MT Device is a switch and you clearly stated you have an upstream firewall that takes care of firewall rules etc. so not sure what the issue is??Its a...
View ArticleContainers • Re: failed to extract layer when pulling the image
On what device are your trying this ?Sure you have enough space ?And sure it's the correct architecture for the device you are trying this on (ARM, ARM64 or x86) ?Statistics: Posted by holvoetn — Tue...
View ArticleGeneral • ns1.kissthenet.net misconfigured?
Hello Mikrotik,Not sure where to report this, but one of the two nameservers that answer your /ip/cloud ddns results for mynetname.net appears to be misconfigured. It's responding with nxdomain for...
View ArticleGeneral • IP Cloud domains mynetname.net down again?
It's unstable again. Twice in a week. Definitely going to look for a different solution for domains.Statistics: Posted by yearly7100 — Tue Jan 02, 2024 4:49 pm
View ArticleBeginner Basics • Open vpn connection Error
Hello there,I had tried to set up ovpn in my mikrotik but i am getting below mentioned error could you please suggest me what can be done as i am new to mikrotik and would really appreciate your...
View ArticleGeneral • Re: CCR2116 disappointing can't do >2gbps PPPOE, single CPU >95%
Have you found a solution by any chance? I'm facing the same issue.Statistics: Posted by AlohaSpark — Tue Jan 02, 2024 5:11 pm
View ArticleBeginner Basics • Re: Can't upgrade: ERROR: could not resolve dns name
Hi, not sure this topic is still open or resolved somewhere. I had the same problem of DNS error issues trying to upgrade my Mikrotik router. Seems the Firewall config was causing my issue, there is a...
View ArticleBeginner Basics • Re: Edge and Point-to-Point bridge ports
It depends on the structure of your network. When you have just a home network, it usually is best to turn off STP completely (protocol-mode=none).In certain situations you cannot do that, e.g. when...
View ArticleGeneral • Re: L009UiGS-2HaxD broken POE-Out after update to 7.13
It is just the "auto" setting that is no longer available (and it was removed in 7.12, not 7.13). You can still force it on or off, though.Statistics: Posted by andriys — Tue Jan 02, 2024 5:37 pm
View ArticleWireless Networking • Re: Wave2 - Bridge.Ports vs. Wifi.Datapath
I have just switched to 7.13 and it seems it's that the only way to make it working is to let the device add CAP locally with datapath. If you don't let the device to be added locally it won't be...
View ArticleGeneral • Re: How to enable ROMON correctly? (I have three switches with...
I also have problems with romon on CRS318-1Fi-15Fr-2S it keeps changing and disconnecting my winbox. On the remote switch I manually set an ID equal to the MAC Address of the ethernet port connected...
View ArticleGeneral • Re: Force Users to Use Specific DNS Server
Well will focus on DNS related rules........In general the Device acting as DNS server has to have access to the internet to get DNS itself.EVEn a DOH servers needs some unencrypted DNS access to make...
View ArticleGeneral • Bonding on switch with vlans
Hi everyone.I'm trying to setup a bonding over 2 wireless links. It works fine but with some caveats...On one side I have CRS112-8G-4S and on the other side CCR1036-12G-4S.CCR1036-12G-4S: using...
View ArticleRouterBOARD hardware • Re: Mikrotik device mesh
Will you use a cable in between, or are you referring to mesh in the wireless backhaul definition?When using a wireless backhaul, you will loose performance when not having a dedicated radio for...
View ArticleWireless Networking • Best practice AX and AC Devices in the same Building
Hi,can i use AC and AX Devices in the same Building on the same Capsman?Best RegardsKlausStatistics: Posted by dotti — Wed Jan 03, 2024 12:48 am
View ArticleGeneral • Re: Liebert IS-WEBCARD HID9 (UPS monitoring card) DHCP...
Maybe you need to add the (newish 7.1rc5):force=yeshttps://help.mikrotik.com/docs/display/ROS/DHCPStatistics: Posted by jaclaz — Wed Jan 03, 2024 1:32 am
View ArticleBeginner Basics • Re: Port forwarding issue
Ohhh this is so confusing for me,i cant add simple port forward to my server without this NAT HAIRPIN?Statistics: Posted by rseke — Wed Jan 03, 2024 1:53 am
View ArticleBeginner Basics • mangle prerouting not mark upload
Hi, Last week not find the problem witch marked packed can You help me find problem, bellow configration Code: /ip firewall mangleadd action=mark-connection chain=prerouting comment=Con-Service_Hi...
View ArticleThe Dude • Re: The Dude math functions
I decided to do it a little differently. With Raspberry (Orange Pi). If I use it as a probe, everything is ok, no problems. But if I add it to the link label, Dude sends 324 requests/port per each...
View ArticleGeneral • Re: Unstable clock on RB5009UPr+; critical,info ntp change time
Was this rule on another device? It doesn't affect router's own traffic.On the same device.Statistics: Posted by pcunite — Wed Jan 03, 2024 2:38 am
View Article