Forwarding Protocols • Re: IS-IS
I'm a bit mixed on the new high core count moves. Frankly, for pure routing the 2004 and 2116 are blazing fast, optimizing routeros to use more cores would just keep making those better and better.The...
View ArticleGeneral • Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
This thread is 1341 days old.Statistics: Posted by gotsprings — Wed Jan 03, 2024 4:53 am
View ArticleForwarding Protocols • How do I "sync" routes between routing tables?
I would like directly connected and static, and OSPF routes on main table to also be reflected in table rtab1. How would I do that?So far, I have tried making two local BGP instances (connecting to...
View ArticleAnnouncements • Re: NEW FEATURE: Back to Home VPN
Hello, have you seen this from cloudflare https://developers.cloudflare.com/cloud ... connector/ ? Maybe a warp connector can be implemented in ROS? This seems like it would save MK the need to setup...
View ArticleGeneral • Re: RB4011iGS+ won't upgrade from 7.6 to 7.12
@KaPl74 if you're looking for the Reply button, it's the green button all the way down of this page on the left side.[EDIT] It might be a red button too, it depends how you end up on this...
View ArticleClik here to view.
General • Re: DNS not resolving some domains
You are very brave you have port 53 exposed to the world and you were so proud of it You clearly didn't read the DNS WIKI did youhttps://help.mikrotik.com/docs/display/ROS/DNSsee this they put it in a...
View ArticleGeneral • Re: RB5009 USB problem
Yes, I've installed 7.13 ros and firmware on all my boards, issue is still there.Statistics: Posted by kusterh — Wed Jan 03, 2024 8:15 am
View ArticleGeneral • Re: RB5009, RouterOS 7.9.1, USB slot keeps changing
Can you indicate which usb drive you're using? Maybe the issue is related to the SanDisk ultrafit drive that I'm using. I've installed 7.13 ros and firmware on all my devices and still see the...
View ArticleGeneral • Re: Local IP Addressed leased but no internet.
Do you have an input rule from your LAN to the Mikrotik? Looking at your rule base, that doesn't seem to be the case.Can you post the outputs of the following commands?Code: /ip firewall/filter/print...
View ArticleWireless Networking • Re: Best practice AX and AC Devices in the same Building
You can if ac devices run wifi-qcom-ac driver (see new wifi manual for instructions). ac devices have to run ROS v 7.13, ax devices can run older v7, capsman device has to run wave2/wifi capsman,...
View ArticleGeneral • Re: High CPU useage on 4 core X86 machine
What kind of speed test are you running? Running ROS own bandwidth test on tested device itself doesn't benchmark anything, it is mostly CPU hog ...And how are you intending to use the 4 available...
View ArticleGeneral • Re: mynetname.net DNS down?
Can you suggest one for me please?Statistics: Posted by Ali99 — Wed Jan 03, 2024 10:30 am
View ArticleGeneral • Accessing router-hosted services (DNS, HTTP, etc) from a VRF
Hello,I've got a setup where I have one VRF with a bunch of interfaces in it. I also have manual routes set up between the VRF and the main routing table, such that a host on the VRF interface can...
View ArticleClik here to view.
Beginner Basics • Beginning RouterOS 7 config- need help with enabling vlan...
Just building this out but got stuck when i put on vlan filtering on the bridge. Did some searching but never found a complete answer. There is no IP on MGMT as I use a direct connect ethernet cable...
View ArticleGeneral • Re: Wireguard Peers can't access IPs on VLANs
Okay so to recap and make sure on same page.1. VDSL Modem/Wifi Router is where internet terminates. The modem gets the public IP.It provides a flat network of 192.168.2.0/24 where the modem router is...
View ArticleVirtualization • Re: CHR image for ARM systems?
Is it for ARM Ampere cpu?Software run on Hetzner Ampere run fine on Apple ARM M-series.If yes, is it coming soon.Did Mikrotik announce it anywhere?Statistics: Posted by stmx38 — Wed Jan 03, 2024 11:12...
View ArticleScripting • Scropt to netwatch bot telegram
Can anyone help create a script for Netwatch? ..... displays the number of downs and displays hosts that are down for telegram bots... thank youStatistics: Posted by nadadering — Wed Jan 03, 2024...
View ArticleAnnouncements • Re: v7.12.1 [stable] is released!
I upgaded my old 10 and 2 brand new CRS326-24S+2Q+ from 7.6 to 7.12.1I faced a problem after the upgrade: the ETHER1 (management) interface was not reachable from 3 devices of 12. One device was brand...
View ArticleScripting • hotspot new active
Hi guys and still happy new MT year everybody!i create this script:/export file=email/tool e-mail send \to="abc@def.com" from=abc@def.com \subject="new user connected" body="$[/ip hotspot active get...
View ArticleBeginner Basics • Separating networks
Hello noob is here and i will be fast, i saw this topic alot but i think i have a "different" problem...In my case i took the cable from the lan port of the router that ISP gave me and plug it in the...
View Article