General • Re: Wireguard and DMZ ISP
Sure, as long as your ISP does muck around with CGNAT and you have a public IP that you can "map" 1:1 to the inside.Statistics: Posted by jvanhambelgium — Mon Jan 29, 2024 9:29 pm
View ArticleGeneral • Mikrotik config forweb sites
Hi,I have 2 web servers in my LAN network. Each one have a private ip address. Each server has several web sites, and each web sie will have its domain name. The servers are behind an ISP router with...
View ArticleClik here to view.
General • To xSTP...or not
I red a lot about using Spanning Tree Protocol and found that it is recommended to use RSTP when using hAP ax2 and hAP ax3.If the CAP is hAP ax2 or hAP ax3, it is strongly recommended to enable RSTP...
View ArticleGeneral • Re: Mikrotik config forweb sites
I think you are looking for a reverse proxy, as far as I know MikroTik doesn't offer that functionality out-of-the-box.Perhaps run Traefik in a container?Statistics: Posted by erlinden — Mon Jan 29,...
View ArticleGeneral • Re: To xSTP...or not
The short answer is "unless you really have something against it, it costs nothing to enable it." I would make the case that in a Mikrotik environment, it is actually better to have something rather...
View ArticleScripting • Re: Script for LTE1 reset in access the LTE access technology is...
What ever if in the modem properties the network mode is left only LTE? If it doesn’t help, I recommend going to the hardware section - perhaps the guys there will tell you what to do with the modem...
View ArticleWireless Networking • Re: CAP AX - CAPSMAN- no DHCP lease
New Wifi capsman no longer supports traffic tunneling to the controller. It is always in local forwarding mode.Statistics: Posted by whatever — Tue Jan 30, 2024 1:16 pm
View ArticleBeginner Basics • Port forwarding to PiVPN with Wireguard doesn't work
Hi!I have a problem with setting up port forwarding on my Mikrotik devices to RaspberryPi running PiVPN (I also tried with an ASUS router supporting Wireguard and the result was the same). The...
View ArticleGeneral • Re: 7.13 wireless package split question
Do you even READ what is written?Again: when an RB4011 (or any device) is upgraded from 7.12.1 to 7.13, an unusable WiFi menu is added.This takes up space on the device (a real problem on e.g. the hAP...
View ArticleClik here to view.
General • Re: IPv6: CRS not getting default routes via RA
Yes I could add it manually but the point of RA is to provide full IPv6 connectivity, not just the address which is not really useful without the proper routing. Statistics: Posted by Kedare — Tue Jan...
View ArticleWireless Networking • Re: Hotpspot Connected But No Internet
You have two bridges, could you rework the configuration to have a single bridge with vlan-filtering and VLANs to separate the hotspot?Statistics: Posted by vingjfg — Tue Jan 30, 2024 1:57 pm
View ArticleGeneral • Re: Allow remote-logging input on ROS
You have a RouterOS box that supports containers ?Then you could deploy such a container and collect logs. Offcourse you need to store them somewhere, so at least some external USB would be a good...
View ArticleRouterBOARD hardware • Everything but hAP ax2 is pointless?
I'm looking for non-wifi home router in $80-120 range. Using separate APs for Wi-Fi.RB4011 and RB5009 are different league and out of budget.Hex S - $79RB450Gx4 - $99hAP ax2 - $99L009UiGS-RM - $119Hex...
View ArticleGeneral • After configuring PCC load balancing, the required DDNS public IP...
My family currently uses two broadband service access providers. IPS1 provides a Dynamic public IP address, and IPS2 does not provide a public IP address. When I use the IPS1 service provider line...
View ArticleRouterBOARD hardware • Re: Everything but hAP ax2 is pointless?
Obivously you don't have to use the wifi provided by the router. Seems (to me) that there is not many requests for wifiless routers in that price range.Statistics: Posted by erlinden — Tue Jan 30,...
View ArticleWireless Networking • The user create his own username and password on...
Hello guys!!! Its possible to the user, on the login page after connected on WIFI Hotspot, create his own username and password, them that data goes to Mikrotik user on hotspot, and I just activate,...
View ArticleScripting • Re: Log Filter
I tried to apply this script to CRS with OS version 7.12, but the script sent all the last logs that appeared in CRS and did not select what was written in :local mkwdWhat do you think is the...
View ArticleGeneral • Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
rushlife thanks for the export. May I also see your supout.rif file?Statistics: Posted by birdie — Tue Jan 30, 2024 3:28 pm
View ArticleBeginner Basics • Re: Improve firewall
Thank you for your explanation. Generally, I think similarly, but this is just my speculation - I have not found evidence anywhere that this is actually the case - and how much it differs.Statistics:...
View ArticleBeginner Basics • Re: Reset counters - no way or bug in WinBox?
Well, for WiFi I use the usermanager to allow a limited set of MAC addresses and assign them the VLAN I want.(unfortunately the new WiFi driver cannot do that anymore...)But with this config, the...
View Article