Forwarding Protocols • IPsec and routing (OSPF) 🤯
I realize that transmitting packets over IPsec can blow your mind. But help me put my brain back together.I have 3 routers A, B and C connected in OSPF. Each has a valid routing table:Code: K...
View ArticleGeneral • GPON - Modem-ID
Hey guys,I finally got my fiber optic internet connection.Now I would like to continue using my RB3011 as a router and "modem".I bought a GPON transciever from AVM and installed it in the SFP port.My...
View ArticleGeneral • On-Premise / Azure VPN S2S (IPsec) Connection
Hello,Since Azure VPN defaults to route-based VPN where it uses VTI feature but mikrotic dont support it.How do you configure site to site VPN connection to onpremise site? Does it require combination...
View ArticleGeneral • help with pcc load balance
I've got multi wan load balancing: a Starlink +11 adsl bridge...Starlink router: 192.168.1.1the adsl all are pppoe-client first i want to marge the starlink with the other note:(the adsl speed 12Mb...
View ArticleSwOS • Re: from network to network without a gateway
HiTo let two network communicate without going through a router, you need a level3 switch.They normally cost more than normal switches.Cisco have good level3 switches.Statistics: Posted by F1Geir —...
View ArticleGeneral • Re: DHCP in VLAN not working for virtual wireless interface
Thanks for the info! These are the guides I followed:- Router-Switch AP (viewtopic.php?t=143620)- Advanced Firewall, adapted from here (https://help.mikrotik.com/docs/display/ ... d+Firewall)I...
View ArticleGeneral • Re: OpenLDAP login with RADIUS
MSCHAP will definitely work against plaintext credentials, if your setup does not it is most likely a FreeRADIUS configuration error - run it with debugging enabled and look at the logs.Depending on...
View ArticleBeginner Basics • How do I intercept NAT packets from upstream router?
Hi everyone,I don't really understand well the inner workings of NAT, and I'd like to know how to block packets coming from another router, using Mikrotik's firewall.The setup is as follows:There's a...
View ArticleRouterBOARD hardware • 2.4GHz Wifi6 CPE?
Does Mikrotik plan on releasing a 2.4GHz CPE with Wifi6, for use with the mANTBox ax 15s? A 2.4 version of the upcoming L11UG-5HaxD would be nice.Statistics: Posted by AiroSam — Tue Jan 30, 2024 6:18 pm
View ArticleForwarding Protocols • Re: BandWidth Test
Where are these losses?If you clog the connection with a traffic jam, you will always have losses.Statistics: Posted by Zergling — Tue Jan 30, 2024 6:29 pm
View ArticleBeginner Basics • Assignment of one client to 5GHz and other client to 2.4 GHz
I have been using the cAP ac (3 units) in my home since the beginning of 2019.Now I want to add IoT and am therefore setting up a completely new setting.I would like to put the setup together step by...
View ArticleForwarding Protocols • Re: Splitting /24 between two BGP peers.
I understand somewhat what you're trying to convey, but I don't know how to implement it. Additionally, for example, one of the /24 blocks should always use the same BGP2 since I'm not allowed to...
View ArticleWireless Networking • Wifi-qcom-ac, United Kingdom no Band C support
Anyone else noticed this. With the old legacy wireless drivers I was able to use 5ghz Band C in the United Kingdom, but with the newer wifi-qcom-ac drivers, Band C is no longer available when set to...
View ArticleGeneral • Mikrotik Professionals Conference in Prague March 7th-8th 2024
Is anyone else going to the Mkrotik Professionals conference in Prague ?Be great to meet up there !https://mtpc.world/Statistics: Posted by nickshore — Tue Jan 30, 2024 7:02 pm
View ArticleGeneral • Re: After configuring PCC load balancing, the required DDNS public...
Instead of making us puzzle out screenshots of text, it’s far better to put the sanitized output of an “/export” command into a “code” block. It’s smaller, easier to search, and faster to...
View ArticleGeneral • Re: Mikrotik Professionals Conference in Prague March 7th-8th 2024
Thank you, what a pleasant surprise and especially that the event is held in cozy Prague. Cheers!Statistics: Posted by Larsa — Tue Jan 30, 2024 7:20 pm
View ArticleBeginner Basics • Re: How do I intercept NAT packets from upstream router?
Ok, I think I've found the answer.The trick is to open ports on the Huawei router redirected to the LAN IP address of the Mikrotik. In my case, I open port TCP 6040 to 192.168.92.2.Then, on the...
View ArticleGeneral • subnet-to-subnet communication
Hi, I'm quite new to Mikrotik. So I'm replacing the other HW to Mikrotik in my network, and have faced some issue on the subnet-to-subnet communication that I can't get working myself.To present the...
View ArticleWireless Networking • Re: CAPsMANv2 configuration for secondary SSIDs on...
Tried again today to see if the VLAN issue was fixed but no joy.In my setup I have a hAP AC2 and 2x cAP AC units. I was able to do the workaround for the cAP AC's but the hAP AC2 will not accept the...
View ArticleGeneral • Re: On-Premise / Azure VPN S2S (IPsec) Connection
Hi, there are plenty of guides online. Here are some examples: - Azure VPN Gateway and Mikrotik IPSEC/IKE Configuration- MikroTik site-to-site IPsec VPN connection to Azure Resource Manager based...
View Article