General • Re: DHCP in Bridge Mode (revisited)
I'm trying to do the following:In bridge modePort 1 = InternetPort 2 = management network (172.16.0.0/16)Port 3 = Client A (192.168.1.0/24)Port 4 = Client B (192.168.2.0/24)It's important that I can...
View ArticleBeginner Basics • Re: Can hAP lite act as a wireless repeater with its own SSID?
Hi,Yes, that is possible with any MikroTik router that has Wi-Fi radios, as they all run RouterOS.To implement your setup you will need 2 Wi-Fi interfaces in RouterOS:1) one in Station (client) mode...
View ArticleGeneral • Re: Upgrading CCR2004
I was able to fix this issue by repartitioning to 2 partitions, then it was able to upgrade successfully.Statistics: Posted by madman22 — Wed Apr 09, 2025 4:54 pm
View ArticleBeginner Basics • Re: Events on master port will be handled by slave
Thanks for sharing!Statistics: Posted by HannahYoung — Wed Apr 09, 2025 7:57 am
View ArticleBeginner Basics • Re: DoH Mullvad/Yandex
Hi,I have realised from your comments that Mullvad DNS DOH is still not supported. Is there any wishlist or any way how this feature could be prioritised. Does not make sense to pay Mullvad VPN and do...
View ArticleGeneral • WireGuard - dynamic routes
Hello,I need some guidance on what I am doing wrong. WireGuard connection is set up and working, but I have problem with dynamic routes.Idea: Have list of domains that are using WireGuard connection,...
View ArticleBeginner Basics • Can not login after using ‘Quick Set’
Yesterday I was starting to setup my CRS317 (RouterOS 7.18.2). After connecting the router to a PC interface having an 192.168.88.x address I could access the router.At first login I had to change the...
View ArticleWireless Networking • Re: access point won't start
Perhaps you can reset the wifi1 and then do a reconfigure. Something like /interface wifi reset numbers=0It makes absolutely no sense why it would take ages.Nothing in the logging? Is the interface up...
View ArticleGeneral • Transport UDP Multicast Over Internet
Hello, I have the following scenario:Multicast UDP Server---> Mikrotik ---> EOIP--->IPSEC---> INTERNET ----> IPSEC ----> EOIP ---> MIKROTIK ----> IP to RF modulatorAt both...
View ArticleClik here to view.
Beginner Basics • Re: Can not login after using ‘Quick Set’
Which port on the CRS317 is your PC connected to?If it is ether1, you should try the other ports, but since they are SFP's, you will need a copper SFP, and it may well not work if you haven't already...
View ArticleClik here to view.
Beginner Basics • How to connect/ping from a lan to RouterOS after boot !!??
I have a relatively advanced network. in that network I defined VLAN88 which have you did all ready guess, as address range '192.168.88.0/24' The gateway of that VLAN is my pfsense router. Normally I...
View ArticleGeneral • Re: Transport UDP Multicast Over Internet
The problem I'm having is pixelation on the client side.More generally you want to look at the MTU on EoIP... If it's 1500, your UDP multicast video may be getting fragmented, and if lower you could...
View ArticleGeneral • Re: CHR upgrade to 7.X, no MAC addresses across the bridge
For others that run into this issue:I deployed a brand new VM on 7.18.2 and rebuilt the config from scratch. This is working. Assuming there is some issue with the conversion between 6.49.10 and...
View ArticleBeginner Basics • Re: PCC load balancing
What are your qualifiers in the PCC mangle rules??Statistics: Posted by anav — Wed Apr 09, 2025 7:17 pm
View ArticleClik here to view.
General • Re: How to root out loops (noted on WiFi LAN)
If you sniff the broadcast traffic, does src-mac-address tell you anything? Likewise src-IP-address?Thank you for pointing me in the right direction.The issue was both the loop, that was caused by the...
View ArticleThe User Manager • Re: Showing Total Transferred or Total Download in Status...
Any insights on how to read data from Raius?Help is more than appreciated..I also want answer to that.We will find help, I'm pretty sure.I google too much about it with no hope!Statistics: Posted by...
View ArticleMikroTik hardware questions • Re: CCR2116 BRAS Disk Storage Issues – Seeking...
My guess is that you somehow have trashed the flash-memory by used it for storing logs and other thing.7.10.2 is really old. I would try to do a netinstall with latest version.Statistics: Posted by...
View ArticleBeginner Basics • How can I configure DHCP on EoIP over Wireguard?
I need to configure a port of my local router to get IP from a remote router over Wireguard.But my configuration is not working.My original post about that problem: viewtopic.php?t=216071Statistics:...
View ArticleBeginner Basics • Re: netPower Lite 7R / can NVR PoE power this switch?
hi Guru,thanks for this information!I will supply the power to the device from the PoE out of the NVR.ciao,AntonioStatistics: Posted by antoniocerasuolo — Wed Apr 09, 2025 10:30 pm
View ArticleGeneral • Re: WireGuard - dynamic routes
Would need to see the complete config,but it sounds like you want the users on your subnets to use wireguard for specific WANIPs that exist, and where they are not static but dynamic WANIPs.First,...
View Article