MikroTik hardware questions • Default power grid voltage for Mikrotik devices
Which power grid does the Mikrotik devices work on by default?For example - let's refer to the device hAP ax2 (Product code "C52iG-5HaxD2HaxD-TC") - Link to...
View ArticleMikroTik hardware questions • Re: Default power grid voltage for Mikrotik...
It depends on where you buy It.The included power supply (external brick) is a 24V 1.2A one, available both with US plug (and suitable for 110V AC) or with EU plug (and suitable for...
View ArticleGeneral • Re: VOIP Problem in Mikrotik
did u disable sip 5060/5061 at Service-Port?Statistics: Posted by nichky — Sun Apr 06, 2025 1:09 am
View ArticleMikroTik hardware questions • CCR1036 dead
Hi,Suddenly our office wasn't connected anymore. After a couple of minutes we've found out that our router died. Searching the internet pointed us towards a power supply failure, but unfortunately...
View ArticleBeginner Basics • somewhat new to ROS, and network settings as a whole, not...
I have multiple ROS CHR instances running on DO, US-SF, US-NY, singapore, and germany, all linked together with multiple wireguard tunnels for manual routing of traffic, they also connect to onsite...
View ArticleBeginner Basics • Re: Kids Control
Hi,I have a slightly different question on Kid Control feature. I have set up Kid records and their devices together with time schedule and rate limits. Everything works fine. From the phone...
View ArticleWireless Networking • Re: Apple Airplay not working
Also would like to know if you solved this. I can see my Apple TV from my MacBook but it gives me an error when I try to extend the display to it. Just a generic "Could not connect to Entertainment...
View ArticleRouterOS beta • Re: CAKE autorate-ingress turns speeds into molasses
Bump.Still isn't fixed in the latest build.Statistics: Posted by BitHaulers — Sun Apr 06, 2025 5:41 am
View ArticleWireless Networking • Strange issue with ac2 2.4GHz
I recently replaced a very old WiFi N router with hAP ac2 at my relative's place. One PC had a very old Linksys USB WiFi N adapter that worked fine with the old router. However, something is very...
View ArticleMikroTik hardware questions • Re: hAP ac2 revisions
I just realized that this r3 version is actually an international version. I'm in the US, and all other hAPs I touched were US model. I didn't pay attention to the fact there was a long list of...
View ArticleBeginner Basics • Is it possible to have multiple mac address in same vlan...
Hi,I want to use multiple ISP PPPOE Clients in the same vlan but ISP doesn't allow multiple accounts on the same MAC Address so I need a different Mac address on the same VLAN, Is it possible to do...
View ArticleBeginner Basics • Re: Is it possible to have multiple mac address in same...
You can possibly add a macvlan to the vlan, and then add your new PPPoE client to the macvlan (which has a different mac address).Statistics: Posted by rplant — Sun Apr 06, 2025 9:56 am
View ArticleClik here to view.
Wireless Networking • Re: Vlans over 60Ghz PTMP link
Hi again.Untagged VLAN1 on edgeswitch and everything works as expected .Problem nr 2.....I have from router native vlan 1(untagged) to Cube 60 SA( cube 60 no vlan config, just edited static ip on same...
View ArticleGeneral • Re: ISP CCR2216 L3HW-Offloading Issues
Fast-track is a driver optimization. Makes no sense that Mikrotik should develop customized drivers for 3rd party hardware.Statistics: Posted by mada3k — Sun Apr 06, 2025 11:05 am
View ArticleMikroTik hardware questions • Re: CCR1036 dead
That doesn't sound good. Use a simple multimeter to measure the voltage over the yellow-black wires in in the 4-pin 12V-ATX connectors on the motherboard. Should be 12V or 24VStatistics: Posted by...
View ArticleMikroTik hardware questions • Mikrotik Router with 2.5 Gbps
I've been out of Mikrotik news for a while, and am looking for a replacement for my old and trustworthy 941-2nD limited to 100 Mbps. Get new fiber in the area with a speed 1-2 Gbps, but after...
View ArticleMikroTik hardware questions • RB5009 power supply PoE-in (2.5Gbit) problems
I have a USW-Flex-2.5G-8 PoE with an external 210W power supply and I would like to power the Mikrotik rb5009 via PoE. Unfortunately, the router does not start. However, when I power the router with...
View ArticleGeneral • issue with IKe2 VPN connection from Android!
Hi,I am trying to setup IKe2 VPN on a Mikrotik router to be used from an Android phone using a STRONGSWAN client. I have used the following system to setup the said...
View ArticleBeginner Basics • Re: Internet connection lost when set to Static Address...
Is there a way to make this work with static settings? Thank you for your help.Not likely. It could well be that ISP's router has settings which require it's downstream clients to acquire address via...
View ArticleGeneral • Re: issue with IKe2 VPN connection from Android!
You're running into two pretty common IKEv2 issues:- "no policy found/generated"This usually means the router can't generate a matching IPsec policy. Check your peer, identity, and proposal settings....
View Article