Clik here to view.
General • Re: PPPoE Compatibility Issues with vBRAS/NFV
Totally off-topic, but I really don’t get why some ISPs still insist on using outdated tech like PPPoE with FTTx. I mean, all modern BNGs support IPoE with optional VLAN tagging, which is so much...
View ArticleWireless Networking • Re: RouterOS 7.18.1 Negatively Effected hAP ax^3
After testing of v7.18.2 I had to switch back to the version, I'm confident enough because I don't have much time to make experiences in a production now.. - that's v7.14.3 in my case where any wi-fi...
View ArticleClik here to view.
Containers • gretap-tunnel-container
while ago ... I've thrown the native gretap-tunnel-container idea into the cooking pot ...... do ... we ... have ... ... results ? Statistics: Posted by floaty — Fri Mar 14, 2025 1:36 am
View ArticleGeneral • Re: RouterOS License Level 2?
What would be the point of it? License levels 0-6 only apply to MT's own hardware and all of their hardware comes installed with license level at least 3 (most devices 5, some 4, some 6).x86 (bare...
View ArticleGeneral • CCR1036 vs CCR2116 CGNAT
Greetings. I'm about to implement a new network architecture. I'd like your help regarding the experience of using the equipment. I need to decide between a CCR1036 or a CCR2116 to use as CGNAT. Which...
View ArticleMikroTik hardware questions • switch rule - Are only Ingress?
I know this is going to sound like a stupid question...But I was really in doubt based on the Mikrotik documentation about this.Are switch rules applied only in the ingress direction?Code: /interface...
View ArticleClik here to view.
General • Re: ovpn-import: disconnected <TLS error: handshake timed out...
I also can't configure OpenVPN on Mikrotik hAP ac RB962UiGS-5HacT2HnT (mipsbe) I tried different firmware from 7.16.2 to 7.18.2 (stable).Router logs:Code: Mikrotik disconnected <TLS error:...
View ArticleMikroTik hardware questions • Re: switch rule - Are only Ingress?
at least in CRS 3xx and 5xx, AFAIK only ingress filtering/rules, and only egress queuingfor small devices like hex, rb951g etc, the same /interface ethernet switch port menu can have different...
View ArticleGeneral • Re: Request for WireGuard Peers, configurable Client ListenPort and...
Hey Hey, calm down and try the "WG Import" button with it. "WG Export" button generates a file and give this to the "WG Import".See what happens and obviously you will realize it yourself.If not, then...
View ArticleForwarding Protocols • iBGP RR Client option missing from v7.16+
Hi all,Does anyone know why local.role=ibgp-rr-client has gone from v7.16 onwards? I've been trying to set up on v7.17.2 thinking there was a different way to configure it but confirmed on older...
View ArticleGeneral • Re: CCR1036 vs CCR2116 CGNAT
i think (if properly implemented) ccr2116 can get a noticiable boost by usingOffloading Fasttrack Connectionshttps://help.mikrotik.com/docs/spaces/R ... onnectionsStatistics: Posted by chechito — Fri...
View ArticleGeneral • multicast to different vlans
Hello,I played around with multicast over the vlans but cannot figure out how to send the traffic to different vlans.The topology and config is as follows. What I want to achieve is: multicast traffic...
View ArticleForwarding Protocols • Re: iBGP RR Client option missing from v7.16+
Code: ibgp-rr-client had no special meaning, it is the same as ibgpviewtopic.php?t=211277#p1099896Statistics: Posted by chechito — Fri Mar 14, 2025 4:35 am
View ArticleGeneral • Mikrotik iOS app - can't connect over Wireguard using IP
Ok, so this is strange. Mikrotik app iOS 1.2.14 on iPhone connected via Wireguard VPN that terminates on a Mikrotik hAP ax^3.I can connect the VPN and ping the hAP ax^3 internal interface.When I try...
View ArticleGeneral • Re: Mikrotik iOS app - can't connect over Wireguard using IP
Wireshark packet capture shows no traffic over the wireguard interface when attempting to connect via IP (can see ICMP traffic when I ping from the iOS device to the IP) but when I use the DNS name...
View ArticleGeneral • how to route 6 WANs to CHR over the Wireguard tunnel.
Dear All,I have 6 WAN on Mikkrotik PCC Balanced and a Wireguard tunnel connected to CHR, and I want to pass all my LAN traffic to CHR using 6 WAN.What do I need to do?Do I need 6 Wireguard peers?How...
View ArticleGeneral • how to route multiple WANs to CHR over the Wireguard tunnel.
Dear All,I have 6 WAN on Mikkrotik PCC Balanced and a Wireguard tunnel connected to CHR, and I want to pass all my LAN traffic to CHR using 6 WAN.What do I need to do?Do I need 6 Wireguard peers?How...
View ArticleClik here to view.
Announcements • Re: v7.18 [stable] is released!
I can see a massive increase in latency spikes and loss after upgrading to v7.18 on multiple CCR2004-1G-12S+2XS Same problem at CCR1072 and v7.18.1I'm actually a little spooked...Just migrated from a...
View ArticleBeginner Basics • Re: Can't join Teams meeting
1 - Disabled detect-internet feature2 - Removed netmask3 - My ISP provides an static IPv4 entangled with my PPPoE user that sents IPv6 over it too (tried to disable it but didn't work either)4 - I'll...
View ArticleAnnouncements • Re: SwOS version 2.17 released!
Please add port names or numbers in the web interface. It's hard to find the needed port when you have 26 of them. You need to hover a mouse in approximate location first to see a popup with port name...
View Article