General • Re: echo: system,error,critical could not save configuration...
I am freaking out. I just found this thread because I have a Chateau 5G (the discontinued model) with 16 MB of storage. The device is a two-hour plane ride away from me and won’t reboot, showing the...
View ArticleWireless Networking • Re: cAP Lite as a "Dumb AP"
Basis steps:- use Winbox for access since it allows MAC access if you mess up IP settings- remove all firewall rules on filter and NAT tabs (this will prevent your lockout already)- all ports to...
View ArticleGeneral • Re: help with DH group number mismatch: 21 != 14
So i created pcap file and imported it into wireshark.Under Payload: Key Exchange it shows DH Group #: 2048 bit MODP group (14)Does this means the remote site is using DH group 14 and my site is using...
View ArticleMikroTik hardware questions • Chateau PRO ax - Outdoor Aerial
Hello,I would like to install 4 Chateau PRO AX in metal cabinets spread across a site, this solves both the need of a small switch and access point. However, I would like to place the actual aerials...
View ArticleGeneral • Re: PPPoE and MTU > 1488
lol..... the reason it drops to 1480 is because MikroTik sends a message out at the requested MTU and if it does not receive a response it will lower the MTU as that packet got silently discarded and...
View ArticleGeneral • quad9 + DoH issues?
I have had several interruptions to quad9 + DoH over the last 24 hours. It is normally reliable.My configuration uses 9.9.9.9 and 149.112.112.112.Symptoms are multiple messages with errors 403 or...
View ArticleScripting • 7.18 rOS and the problem with scripts
Hello everyone, yesterday I upgraded the rOS version from 17.7.2 to 17.8, and I don't know why the script that sends the daily backup file stopped working. When it comes to routerOS, I'm taking my...
View ArticleScripting • Re: 7.18 rOS and the problem with scripts
You are not the first one to mention the exact same problem.viewtopic.php?p=1129441#p1129441The error message clearly shows where the problem is: line 3, position 61Put quotes around file nameCode:...
View ArticleBeginner Basics • mangle basic whole up/down traffic on PPPoE
Hi,I just want to build queue tree and was stopped on the beggining when I just want to mangle whole upload download traffic on my PPPoE interface (DSL bridge modem)on the ETH1 I have PPPoE (WAN) and...
View ArticleMikroTik hardware questions • Re: Running out of space on hAP ac2
Absolutely the same situation ! It is not normal situation when need to do netinstall after each ROS upgrade. There already was good idea to exclude rarely used features like hotspot/mpls to separate...
View ArticleGeneral • IPSEC full tunnel, inter vlan not reachable
Hi Master Mikrotikhave nice day.we have problem ipsec mikrotik with intervlan 1. brach using mikrotik ip public static, and 2 vlan subnet user , ipsec to sophos firewall2. datacenter 1 mikrotik Ip...
View ArticleScripting • Re: Add comment to mac address when the device appears connected...
Can someone help me please.Statistics: Posted by FRANKMUNOZAPURE — Fri Feb 28, 2025 12:31 pm
View ArticleBeginner Basics • Re: Attempting to isolate Winbox access [SOLVED]
Lately I see dozens and dozens of customers with a hacked DVR / NVR because they insist on leaving a port open to reach it from outside,instead of using the cloud or a VPN first...(All used as an...
View ArticleGeneral • Disabling SMB auto sharing
Ciao!I can't turn off the auto sharing function for the attached USB memory stick.I've triedCode: /disk settings set auto-media-sharing=no auto-smb-sharing=no/disk set usb1 media-sharing=nobut I still...
View ArticleGeneral • Re: Disabling SMB auto sharing
Code: /ip smb set enabled=noBut if that's not what you want, have you already checked from an external device if those shares are still visible ?It's not because they show locally, they are being...
View ArticleMikroTik hardware questions • Re: iot-bt-extra Bluetooth dongle experience
Could you please try setting:/iot/bluetooth/scanner/set own-address-type=publicto see if it helps?Potentially, random-static (own-address) could be causing it, if the dongle does not have "an...
View ArticleGeneral • Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Do newly purchased devices still have this error?Statistics: Posted by xxdreamxx — Fri Feb 28, 2025 1:13 pm
View ArticleForwarding Protocols • Forwarding SIP for FreePBX(Asterisk)
Hi AllHave been using Mikrotik for a while but am by no means an expert, this however is baffling me, all other ports opened for HTTP traffic on Nextcloud and RDP for Terminal services are working...
View ArticleGeneral • Re: quad9 + DoH issues?
I have drops on quad9 (Virgin Media) using DoH, but my problem is all the time not just now and then.Out of interest which server are you connected to ?Code: kdig @9.9.9.9 TXT id.server.on.quad9.net...
View ArticleBeginner Basics • Re: Stuck with inter-VLAN routing
Thank as lot! It works now. Couple of comments: Thanks for the materials! I was aware of and read pcunite's megapost (and can recommend it to those who haven't seen it) and learned a lot from it....
View Article