RouterBOARD hardware • Re: Rackmounting the L009UiGS-2HaxD-IN backwards?
Thank you very much! Your suggestions should solve my dilemma nicely.Statistics: Posted by GingerManBread — Thu Jan 30, 2025 1:45 am
View ArticleGeneral • Re: LACP 802.3ad Tx Drops
I did find these cool transceivers:https://www.fs.com/au/products/135560.htmlI think I'll give them a go and create a true 100Gbps link between the two stacks and see how I go from there. Any other...
View ArticleAnnouncements • Re: v7.17 [stable] is released! Flash-Fig Issues
Since im thrilled with the new interface list option for the switches and the bridge.. I was trying to get all of my switches flash figged to my set up with this configuration. But at first I was...
View ArticleGeneral • RB5009 +wAPax vlans
Hello I have tried to find an answer to this in the documentation and on youtube without any luckSo I have an Rb5009 that has a handfull of vlans on it that is working just fine.But now I have an...
View ArticleForwarding Protocols • Re: How to use "input accept communities" in...
currently input.accept-communities does not work as intended, problem is known and it will be addressed in the future.Any ETA on this one?Statistics: Posted by Dartmaul — Thu Jan 30, 2025 3:12 am
View ArticleGeneral • 7.17 Flash Fig Issues
Since im thrilled with the new interface list option for the switches and the bridge.. I was trying to get all of my switches flash figged to my set up with this configuration. But at first I was...
View ArticleGeneral • Re: RB5009 +wAPax vlans
Will you be using capsman?Statistics: Posted by anav — Thu Jan 30, 2025 3:35 am
View ArticleGeneral • vlan dhcp server roaming to another interface
I have the following config :/container mountsadd dst=/opt/adguardhome/conf name=agh_conf src=/disk1/conf/agh/interface bridgeadd admin-mac=xx auto-mac=no name=bridge-distribusi \...
View ArticleGeneral • Re: only one host to wan
In the forward chain, remove the default ruleadd action=drop chain=forward comment=\ "defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \ connection-state=new...
View ArticleBeginner Basics • Re: A simple WAN/LAN/DMZ VLAN config to start off
I believe I will give this a shot in my lab.It's mostly a template, so adding VLANs like CCTV, IOT, GUEST etc. is easy. But I found that if you don't start with a VLAN config outright, and one that is...
View ArticleGeneral • Bad switch? Crs326-24g-2s+
I have an odd issue where 1-2 times a day I have a 4.5 min outage (always seems to be the same amount of time, though different times of day) and as far as I can tell it's the switch. Learning toward...
View ArticleGeneral • Re: High CPU usage
Code: /ip fi co tr prI'll take the data at peak load later in the evening.mikrotik.pngStatistics: Posted by shark136 — Thu Jan 30, 2025 5:33 am
View ArticleForwarding Protocols • Re: OpenFlow feature?
How do you even enable openflow on a mikrotik device? I swear OpenFlow used to be a separate package you could download and extract from allpackages but its not there, and /openflow is not a valid...
View ArticleGeneral • Re: Tunnel Is UP, But Host Behind IPSEC Mikrotik Unable To Ping...
Hello Panisk,Sorry for my late respond.Yes, currently I used ip 10.205.0.1 for the preference source.Here is the output of iptables : root@vmzabbix:/home/administrator# iptables -L -n -vChain INPUT...
View ArticleGeneral • Re: Log: a lot of garbage
Don't use ! ! means "everything except DNS"How can I remove unnecessary (garbage) from the log?Statistics: Posted by K0NCTANT1N — Thu Jan 30, 2025 6:02 am
View ArticleGeneral • Re: Log: a lot of logs
Don't check the boxes in each of those logs in System>Logging for "dns", "wireguard", "ntp", "dhcp". You DO want the checkbox enabled for "!debug", "!packet", "!raw" things, under the "Topics"....
View ArticleGeneral • Trying to understand odd BTest results to private CHR
I am in Honduras and use a Starlink Gen3 on my hAP ax3's eth1 (the Starlink router is in bypass mode so it is basically just a custom POE injector for the dish). To keep things simple I have a PC...
View ArticleBeginner Basics • Re: Forum rules
There is no such thing as a stupid question, all questions are welcome here.Am I wrong or the users post's count is stuck ?Statistics: Posted by bajodel — Thu Jan 30, 2025 6:59 am
View ArticleBeginner Basics • Help mikrotik is allowing whatsapp
WhatsApp is passing just as I connect to the hotspot without putting ticket or username, i check in walled garden and nothing is allowed but other service are ok please for help if someone could take...
View ArticleGeneral • Re: Memory leak for cap AC 7.14 running wifi-qcom-ac?
I know this is ove a year old, but as I think I'm also affected I wanted to ask - were you able to resolve this using the support ticket?I have two cAP acs currently running 7.17 (stable) and for some...
View Article