Beginner Basics • QUEUE : PCQ + default-small combination (for WAN)
Dear friends,Despite being a user of this brand for a decade, the "queue" part has always been foreign to me. I feel uncomfortable and childish, but I would like to ask you nicely for assistance :My...
View ArticleBeginner Basics • Re: hAP ax3 with issues after reset
I am having similar issues. It will reset / reboot into CAPS mode, but when I try to do a reset into basic factory config mode using the button on the back, the WiFi never comes on, and it does not...
View ArticleClik here to view.
General • Re: Mikrotik SMB Share - Veeam Backup Error
Hi,sorry for late response.So the credentials work (Read/write). I am able to write normal files from Windows Explorer with same credentials to this share.As for NAS usage. Of course it works and is a...
View ArticleGeneral • Re: CCR2004-1G-12S+2XS slow upload
Hi,I have similar problems, I have a 980/110 connection where I actually get 540/110, I can say that I have standard settings for the firewall. A computer connected directly to the connection gets...
View ArticleGeneral • SNMP-values (OIDs) for "Device-Mode"?
Hi, with ROS v7.17 MT enforced a strict device-mode regime:!) device-mode - after upgrade, mode "enterprise" is renamed to "advanced" and traffic-gen, partition (command "repartition"), routerboard...
View ArticleGeneral • New capsman and eoip cap help
Hello,I have one of ap's outside so I put it on very restricted vlan (let's assume 66) and all other vlans were tunneled thru for security reasons. This was ofc very easy with old capsman. Now when...
View ArticleClik here to view.
Beginner Basics • Re: Chateau pro ax out-of-the-box connection problems
Hello to everyone looking in this thread. I've made up my mind. It seems that Mikrotik is not for me. I have no luck with it. Every 4-5 years I buy one of the top-end devices, and unfortunately I get...
View ArticleGeneral • Re: New capsman and eoip cap help
As far as my experience goes, there are two things:capsman has to listen on interface where cap will eventually try to connect (see next bullet). Most often that's management interface but can ve...
View ArticleWireless Networking • Re: cAP ax: Best performance
I don't think so. To achieve a throughput of ≥ 1 Gbps over WiFi, you typically need a 160 MHz bandwidth because WiFi generally operates at about 60-70% efficiency of the PHY rate. At my home office, I...
View ArticleGeneral • Re: How to monitor Internet (WAN) traffic separately for IPv4 and IPv6
Any specific suggestions?The solution called: "Network Packet Broker (NPB)"."Out-of-Band monitoring" not "In-Band monitoring."Statistics: Posted by emunt6 — Sun Jan 26, 2025 5:09 pm
View ArticleBeginner Basics • Wireguard connection only works once: Keepalive problem?
I setup Wireguard on a Hex S but ran into an odd problem that I didn't have on my AX2: Upon establishing a connection only a small amount of bytes would be forwarded through the tunnel. When I enabled...
View ArticleBeginner Basics • Re: Wireguard connection only works once: Keepalive problem?
Only the client peers ON THEIR Devices, require keep alive settings. You have some weird selections.....1. Remove this dstnat rule, it is not required for standard wireguard usage./ip firewall natadd...
View ArticleGeneral • Re: SNMP-values (OIDs) for "Device-Mode"?
Best to ask support ...Statistics: Posted by holvoetn — Sun Jan 26, 2025 6:37 pm
View ArticleGeneral • Implementing QoS on Mikrotik Router
Hello for all..!I have CCR2004 in my company and I want to create a dedicated QoS (Quality of Service) path for the SIP phones in my company to ensure smooth and uninterrupted communication between IP...
View ArticleGeneral • Re: Implementing QoS on Mikrotik Router
Check out this example: https://mikrocloud.com/blog/qos/tos-and-dscp. CAKE might be a better, more versatile way to prioritize important traffic without specifying traffic types.Statistics: Posted by...
View ArticleGeneral • Major Issue with Bridges in RouterOS 7.17
Hello,I recently updated to version 7.17 from 7.16.2 and encountered a major issue with bridges. Their MAC addresses keep changing continuously.I’ve stripped down the configuration as much as...
View ArticleBeginner Basics • Re: Adding USB 2,5Gbe ethernet adapter to RB5009UG
7.16 recently added support for RTL8156, but for now only for x86.are you sure for this ? in changelog no mention to this limitationStatistics: Posted by gianry — Sun Jan 26, 2025 8:23 pm
View ArticleVirtualization • Re: Dell R610 and x86 RouterOS
And what will that configuration tell you, sometimes you need to turn on thinking, and not look at the configurations and not see anything there. In addition, the configuration can be very large and...
View ArticleClik here to view.
General • Re: ISP ideas?
Will there be more offers?Are there any small or internet service providers in this forum?I've been asking this question for the entire time I've been on the forum and I'm not getting a correct answer...
View ArticleClik here to view.
General • Re: Major Issue with Bridges in RouterOS 7.17
But do you have the bridge(s) with auto-mac=yes?I am asking as the usual recommendation is to have manually set admin-mac=xx:xx:xx:xx:xx:xx and auto-mac=no even in v6.x though maybe it is unrelated,...
View Article