General • Re: Forward all requests to one URL
viewtopic.php?p=1112124&hilit=http+leve ... r#p1112124Statistics: Posted by BartoszP — Fri Jan 10, 2025 2:41 am
View ArticleAnnouncements • Re: 📣 WinBox 4 is here 📣
I found this about WinBox encryption https://margin.re/2022/02/mikrotik-auth ... -revealed/. No idea if the author was correct or whether it's still relevant to the current version.Statistics: Posted...
View ArticleWireless Networking • 2 CAP-AC 7.16.2 but only one working
Hi,I have a weird issue. My HAP-AC is on version 7.16.2 and I have 2 CAP-AC in the same firmware with the wifi-qcom package. One is plug on a POE port and the other one with a power injector. When I...
View ArticleGeneral • Re: NORMUNDS FOR PRIME MINISTER
Be careful now @anav... I've read that your prime minister will resign from it's function... Maybe @normis here will became your prime minister Statistics: Posted by gigabyte091 — Fri Jan 10, 2025...
View ArticleForwarding Protocols • Re: Needing of static routing rules for BGP VRF route...
Is your BGP session esatblished from connected network?Statistics: Posted by ericdriver — Fri Jan 10, 2025 6:38 am
View ArticleGeneral • Hotspot Internal Login Page connected to External Database for...
Hi,I'm fairly new to Mikrotik and is amazed by it's configurability. I'm currently working on a hotspot service, with a custom internal login page. Is it possible to have the internal login page fetch...
View ArticleWireless Networking • Re: 2 CAP-AC 7.16.2 but only one working
Try to disable RSTP - log in using Winbox (to both APs and router too). Click on "Bridge", double click on your bridge iface, select "STP" tab and set "protocol mode" to "none".Statistics: Posted by...
View ArticleGeneral • Re: DHCP Server - Domain
Domain is domain name ... without leading dot. So if your host names are e.g. "host.my.domain.tld", then you should set domain property of DHCP server network entries to...
View ArticleBeginner Basics • Re: Checking the Portspeed with with an SFP+ has connected
I assume you are using one of the SFP+ to RJ45 adapters.The following has some info on the Mikrotik one.https://mikrotik.com/product/s_rj10They have 2 versions, and the first version did not report...
View ArticleWireless Networking • Re: old and new Capsmann with VLAN- no conecction with...
New CCMP is same as old AES CCM ... CCMP256 and GCMP* are new ones (not widely supported by wireless stations though, some even barf on seeing these supported by AP).Statistics: Posted by mkx — Fri...
View ArticleRouterBOARD hardware • Re: CCR1009-7G-1C-1S+ 2.5G Compatible?
Note however if you use something like a S+RJ10 in the sfp+ port,it can negotiate 2.5G with remote end while sfp+ is running at 10G,(so Mikrotik thinks it is running at 10G) it runs hot.You will...
View ArticleWireless Networking • Re: WIFI won't turn on(R) after upgrade and downgrade
wireless interface shows "R" status only if there's at least one wireless client (station) connected to it.Are you saying that SSID is actually not broadcasted? This is best verified by using some...
View ArticleGeneral • 2 WAN 1 LAN Load balance VPN L2TP Can't Access to Local Network
Dear MIKROTIK expert team,I need a help from all of you I am successful to set up a load balance with 2 ISP on 1 router MIKROTIK but my main issue now is can't access any local device in network after...
View ArticleGeneral • Re: The IP of the bridge is occasionally unavailable
For which management purposes? Management by who? By the switch chip?Statistics: Posted by Snooops — Fri Jan 10, 2025 10:04 am
View ArticleWireless Networking • Re: Quectel Redcap RG255C-GL PCI-e 5G Modem Support
Okay, I like the sound of the first option you propose, however LTE is not an interface option on my LTAP Mini (Quectel RG225C installed internally) when I try to create a new vlan. Besides, I'm...
View ArticleThe User Manager • Re: User Manager export users
the cool thing is with a script you can transform them into .csv Statistics: Posted by abbio90 — Fri Jan 10, 2025 10:43 am
View ArticleThe User Manager • Re: User Authentication
if you work with ARP you can allow ARP from DHCP by activating the appropriate flag, and you work with DHCP server in only static. This allows only the Mac addresses that you manually enter in the...
View ArticleGeneral • Re: How to reach a router behind a CGNAT?
Starlink indeed gives you a/56 global subnet, but only in "bypass" mode (or how do they call the bridge mode of their router), or if you connect your own router directly to the dishy, bypassing their...
View ArticleForwarding Protocols • Re: How to connect WAN directly to some port,...
"you misunderstood me a little."Probably did indeed. I don't understand your setup with the 2 routers.Can you clarify how it is?Code: ISP -> ISP router with NAT -> LAN connection -> MT router...
View ArticleBeginner Basics • Re: Preventing DNS leaks from network
And would I be correct in assuming that something similar is available for IPv6? It's my understanding that IPv6 doesn't use NAT, but I'd assume some kind of forwarding rule could be set.Statistics:...
View Article