General • Automatically updating DST NAT when IP changes
We are getting rid of static addresses on the WAN side of our routers and switching to Dynamic with DDNS. We use MTs cloud one and we have a backup one of our own. That is working fine, but we have an...
View ArticleForwarding Protocols • OSPF P-Bit - NSSA Route Redistribution
I'm using a NSSA on a number of Mikrotiks. I require the external routes to stay within the area and not be translated at the ABR. Is it possible on ROS6 / ROS7 to remove the p-bit of an OSPF type-7...
View ArticleBeginner Basics • Re: How to set up VLAN to pass traffic through a managed...
On the netgear switch all trunk ports retain vlan1 untagged on the port. PVID setting remains at 1 for these ports.On the netgear switch all access ports ( going to dumb devices ) are untagged on that...
View ArticleGeneral • Re: Automatically updating DST NAT when IP changes
Yes./ip firewall address-listadd address=DYNDNSURL (like mynetname.net) list=MyWAN/ip firewall natadd chain=dstnat action=dst-nat dst-address-list=MyWAN \dst-port=xxxxx protocol=abc...
View ArticleRouterBOARD hardware • Devices bricked by protected-routerboot
I now have several old 802.11n devices (SXTsq5, LHG5 - probably the same board inside) bricked by the protected-routerboot feature.Some mistake in the configuration (not sure what exactly) happened...
View ArticleClik here to view.
Beginner Basics • Help with routing Internet through a RB5009UG router....
Hello fellow Networking enthusiasts, I am "ALL IN" with the Microtik brand and operating system. Having said that, however ...I am feeling overwhelmed by a lack of networking knowledge and the time...
View ArticleBeginner Basics • Re: Help with routing Internet through a RB5009UG router....
deleted RTF file, if you wish to share your config, post it in plain text removing any personal or private data Code: use code tags for proper readabilityStatistics: Posted by chechito — Wed Jan 08,...
View ArticleRouterBOARD hardware • Re: Devices bricked by protected-routerboot
Better to ask via support.They don't always read all posts here.Statistics: Posted by holvoetn — Wed Jan 08, 2025 11:40 pm
View ArticleClik here to view.
General • My LHG - LTE18 is having a Stroke. :D
Hello again, and Happy New Year to everyone. Hope you are all doing great !I have a very weird problem with my LHG-LTE18 and I wanted to know if there is anywhere I can start, in order to find the...
View ArticleClik here to view.
General • SMB access while on WireGuard
Hi Folks,I do have one dummy question, but unable to find answer on forum here, neither google helps. I did setup WireGuard on my Mikrotik, able to RDP to server on remote location but can't access...
View ArticleBeginner Basics • Printer on different VLAN
Hi everyoneI have a slight issue with a Brother printer which is located on a different VLAN than the devices from which I intend to print from. My setup is quite simple:VLAN ID10: Home devicesVLAN...
View ArticleGeneral • BFD at ros-7.16.2 dies without any ability to bring it up
Hi,I have CHR of version 7.16.2 in the datacenter. It has 8 p2p connections with the remote offices.Between the office and datacenter there are BGP tunnels with BFD flag enabled.Everything had been...
View ArticleBeginner Basics • Re: old configs don't work
Got hit hard with snow - company shutdown for a few days.So, I haven't given up. I still need to talk to someone about outsourcing this, but snow emergencies....It appears that 'routing-mark' isn't...
View ArticleClik here to view.
Forwarding Protocols • How to connect WAN directly to some port, bypassing NAT
Hello. Please tell me how I can take the Internet as it is on some port (it can be virtual, with VLAN), bypassing NAT and Firewall of the first one?The idea is this - I want to process traffic going...
View ArticleBeginner Basics • Re: Printer on different VLAN
/interface ethernetset [ find default-name=ether1 ] name=ether1-WANset [ find default-name=ether2 ] disabled=yes name=ether2-LANset [ find default-name=ether3 ] disabled=yes name=ether3-LANset [ find...
View ArticleScripting • Re: :execute output to console? Or any other method?
Since I do not know what your trying to accomplish.., but a alternative to :execute is using :parse and another [] around it to execute it:Code: [[:parse ":export"]]Perfect, didn't know you could...
View ArticleClik here to view.
General • Re: SMB access while on WireGuard
1. Wouldnt call my Bridge "LAN" as LAN is already used on the router for standard nomenclature. Personal choice but at least make itbridge-LAN etc.2. Why do you have two IP pools but only one subnet (...
View ArticleGeneral • Re: BFD at ros-7.16.2 dies without any ability to bring it up
Since you didn’t provide an export or details about the virtual environment, here’s a guess: try increasing the RAM for the ROS virtual guest and monitor memory usage after the next...
View ArticleGeneral • Re: OpenVPN Push Routes
Dear all, I've recently been testing the new "Push Routes" option in the OpenVPN server and thought I'd share some experience which might help others doing the same about what works and what does not....
View ArticleGeneral • Will MikroTik firewall appliances...
Hello,Anyone else nervous about MikroTik future with routers / firewall appliances. Yes, "route the world", but we've been begging and asking for USEFUL features and MikroTik keeps falling short......
View Article