General • Re: Wireguard and WAN Interfaces
First guess: Allow Wireguard traffic explicitly before dropping RFC-rule.Since RAW rules take priority over regular filter rules, you need to allow it in RAW before that drop rule.But without seeing...
View ArticleWireless Networking • Re: cAP ax 5GHz not working in CAPsMAN
You're not provisioning one of cAP ax' radio interface ... both cap-wifi3 and cap-wifi4 configuration stanzas have same MAC set to radio-mac property.That's not it. Both radios have different MAC...
View ArticleUseful user articles • USB Disk issue after hardware reboot
Hello,At the moment we are working on the L009UiGS-2HaxD-IN with an USB attached, we managed to get a container work directly from the usb without any issue while powered on,but noticed that most of...
View ArticleRouterBOARD hardware • Netpower 16p CPU?
initially and according to manual Netpower 16p ha one core CPU. BUT recently after upgrade to 7.13 i can see TWO cpu cores under resources?Do we get one core free of charge ?Statistics: Posted by...
View ArticleUseful user articles • Re: USB Disk issue after hardware reboot
Is that disk by any chance a Sandisk USB-3 device ?Known issue on RB5009. They are working on it.We are looking forward to fix it and currently can suggest to configure a startup scheduler script...
View ArticleRouterOS beta • Re: Using WifiWave2 to bridge two Audience wirelessly,...
But - I can't set frequencies (the tab is missing, probably taking over the master frequency), ... Yes as with the legacy wlan driver, was also like that.Not able to add this interface to the bridge ?...
View ArticleWireless Networking • Re: is version 7.13 worth to install? (about WiFi)
thanks for answer, I have different systems, most of them are mipsbe, in most of objects I have different rooms, is much metter to buy twice mibspe and place them on rooms instead of spend double...
View ArticleWireless Networking • network reorganize
Hello,my current setup is: rb5009 with XS+DA0001 connect to css326 and it is connected to clients and unifi sw-60 poe switch from which 2x unifi ap-ac lite and my cameras are getting poe. also i have...
View ArticleClik here to view.
General • Re: IPv6 configuration /64
just curious, does "/ipv6/neighbor/print" show anything reachable?To whom is your question addressed? Statistics: Posted by BrateloSlava — Tue Jan 09, 2024 5:32 pm
View ArticleGeneral • Re: Not enough disk space
Pretty sure it's an internal rounding issue.Netinstall might clear the inner dungeons just enough.Use 7.12.1 as last stop for that device. It only becomes worse resource-wise with 7.13.Statistics:...
View ArticleScripting • Re: Possible bugs with :onerror (new in 7.13)
I guess I'm not sure what you think is wrong. Getting the error text is main point of :onerror – so on the right track for adding prefix to logging text. First understand only the in= block runs if...
View ArticleBeginner Basics • Re: View full LTE WAN IP info
All I have is LTE in that list, no WAN.When opening up the LTE and checking status the fields are all blankStatistics: Posted by cascom — Tue Jan 09, 2024 6:08 pm
View ArticleBeginner Basics • Re: Test VLAN isolation using InterVLAN Routing by Bridge
Firstly a better and original source for that documentation is found here..... viewtopic.php?t=143620Where you will find its best not to use vlan1 for data vlans.Also that when you change to using...
View ArticleGeneral • Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Hard to have sympathy reading this thread as Rextended alluded to ........ where are the 1000s supout reports..........???Statistics: Posted by anav — Tue Jan 09, 2024 6:20 pm
View ArticleGeneral • dst-nat port forwarding not working
HelloIm setup my new router configuration, new Vlans and fail-over, but im not able to make it work as before with forwarding ports from ISP to lokal devices as it was before.I don't know what else...
View ArticleScripting • Re: DynDNS.com Update
It is probably a write of less than 1 KiB in size and would typically repeat every 5 minutes. Assuming it a 1 KiB write every 5 minutes, It would take 56.8889 days to write 16 MiB.I have no idea how...
View ArticleWireless Networking • Re: Sudden Wifiwave2 issues
So you reset to factory default and still get no SSID? I guess then you'll need to netinstall and see what happens. If it still doesn't work, get in touch with your dealer for an exchange.Statistics:...
View ArticleWireless Networking • Re: No available Channels on cAP but CAPsMAN is ignorant
Perhaps I didn't make myself clear: I configure CAPsMAN and cAP. WiFi starts working. A day later CApSMAN still shows no error but cAP displays the above status. Reboot cAP -> works again.I suppose...
View ArticleGeneral • Re: dst-nat port forwarding not working
How are you having users connect to the device on vlan10?Direct LANIP address or some sort of DYNDNS name/url?ISSUES: 1. VLAN100 makes no sense2. Only two of the vlans have full networks, not sure...
View ArticleGeneral • Re: Ok TX-Drop EVERYWHERE
Thank you.. I’ve been losing my mind over this ..Statistics: Posted by joshhboss — Wed Jan 10, 2024 12:14 pm
View Article