General • Managed Dell switch to CRS326
I'm having a little issue trying to get the CRS326 to work like the Dell Switch. The managed Dell switch has a couple vlans on it but only one is being used from the main router RB1100AHx4 (vlan100)...
View ArticleGeneral • Re: Managed Dell switch to CRS326
You are making it hard for us as well...Can you please provide the config of the CRS326?Code: /export file=anynameyoulikeRemove serial and any other private info and post the result between code tags...
View ArticleForwarding Protocols • Re: Redundancy without loops
- Make proper L2 design ( run redundancy protocol: STP, ERPS ),- Do not mix Switch vendors in the same L2 Domain,- Use same vendor and same software version on all the Switches,- Use proper monitoring...
View ArticleGeneral • Re: DHCPv6 client not assigning the received address on NIC
Thanks for the replies! Enabled "Add Default Route" for the DHCP Client and then directly disabled it again. This caused the addresses to get assigned.Maybe the client was stuck in some state and...
View ArticleBeginner Basics • Re: RB5009 in the hands of a newbie, Gateway problem
Only as a note...I originally suggested to have ether8 as 192.168.88.1/24 (assuming that you would have changed the same range set on the bridge to your local LAN one).BUT what you implemented...
View ArticleGeneral • Re: IPv6 DHCPv6 Issues on MikroTik L009
Not sure if it helps or not, but this is what I'm using for DHCP client settings (albeit on PPPoE interface):Code: /ipv6 dhcp-clientadd interface=internet-pppoe pool-name=public-ipv6...
View ArticleAnnouncements • Re: 📣 WinBox 4 is here 📣
Please bring back in-line comments, no matter the reason. Do not remove functionality; adding is OK or updating is fine, but removing is just BAD.Running under MacOS, x86UPDATE: I see that the option...
View ArticleGeneral • Problem: no downloads from download.mikrotik.com
Hi,my mikrotik hAP ax² is behind a fritzbox cable and works generally fine. I can download files and watch videos, with no problems, at a normal speed. But when I try to download a file from...
View ArticleBeginner Basics • Re: Router and Switch configuration. Why can I ping the...
Code: /ip routeadd distance=1 dst-address=0.0.0.0/0 gateway=10.0.17.1 pref-src="" routing-table=main scope=30 suppress-hw-offload=no target-scope=10when I add this route to my switch, ping from #30...
View ArticleGeneral • Re: Problem: no downloads from download.mikrotik.com
I think the firewall rules are fine because other files, even bigger, are working and I have more or less the default/factory firewall rules. Any hints to help me?The answer is the same as always, you...
View ArticleBeginner Basics • Re: Now to connect mikrotik as an ikev2 client?
If the VPN provider is the one you've posted, then you're out of luck because IKEv2 with username and password means that they're using an EAP method of authentication, which means that you neeed the...
View ArticleBeginner Basics • Re: No connection with winbox
I think the "problem" is in the router because it hasn't got a wireless chip Statistics: Posted by TheCat12 — Mon Dec 30, 2024 9:07 pm
View ArticleGeneral • Re: VPN failed after speedtest
The download works fine. But as soon as the upload (from iPhone to MT) starts and works for 1-2 seconds, then it crushes. After two years it is strange to hear the same issue ... is it possible...
View ArticleBeginner Basics • IPv6 struggle
Hello community.Code: # 2024-12-30 09:26:09 by RouterOS 7.16.2# software id = NAY9-JVHV## model = C52iG-5HaxD2HaxD# serial number = *******/interface bridgeadd fast-forward=no name=bridge1...
View ArticleGeneral • Router login with SSH key help
I am a network engineer at a company that just acquired a WISP where all of the infrastructure routers, nearly all of the customer routers, and some of the switches are Mikrotik, and we only have...
View ArticleBeginner Basics • Re: Mikrotik Wireguard VPN ping/routing Problems
You may have a look at following site which demonstrated a successful configuration, which I use it daily without any problems.Mainland China VPN Hong Kong via MikroTik and...
View ArticleGeneral • Re: Problem: Removing routes to fast breaks routing table?
Your header (removing routes too fast) -- is problem I'm coping now.But i'ts not your problem. Really, when i removing routes in script -- it hangs, routes in table duplicated (numbers duplicated)....
View ArticleBeginner Basics • Re: IPv6 struggle
I removed in above example dhcp server and set on my laptop ip of router as my gateway but nothing changedStatistics: Posted by masaykh — Mon Dec 30, 2024 10:58 pm
View ArticleGeneral • Re: Mainland China VPN Hong Kong via MikroTik and Wireguard
Thank you verygood post, helped me a lot, there is almost none tutorial for this. internet is full of s2s but without tunneling all traffic from one end to main server.Statistics: Posted by mihai9125...
View ArticleGeneral • Re: Router login with SSH key help
Yes, it is possible to login by ssh key.Statistics: Posted by infabo — Mon Dec 30, 2024 11:01 pm
View Article