Wireless Networking • Re: Periodic "Access point temporarily full"...
I did have management-protection set to disabled and I was still getting this silly error keeping devices away from connecting to wifi.So if anyone else is still looking for solution, then your issue...
View ArticleWireless Networking • Mikrotik + Cisco Catalyst 2960X (Cannot connect to...
Hello to the Great Mikrotik CommunityI recently faced an issue with my cAP's that are connected to the Cisco switches,suppose i have a Mikrotik ROS (as main Router and CAPsMAN) to manage cAP's that...
View ArticleGeneral • Re: Mikrotik S+RJ10 in CRS310-8G+2S+IN setting other data rate
I got an answer from the support:The S+RJ10 does not support forced link speeds and does not support speed advertisement configuration, it will always negotiate to the highest possible...
View ArticleScripting • Re: The issue of a function containing variables unsuccessfully.
Then an other question is, what is the meaning of life?Statistics: Posted by msatter — Sat Jun 01, 2024 10:47 am
View ArticleGeneral • Cellular internet in Europe
Hi All,I am live in Bulgaria and travel a lot in Greece and other european countries with my camper. Last month I bought a hAP ax lite LTE6. In Bulgaria I have a sim card with data plan that is...
View ArticleForwarding Protocols • Mangle Issue (Failover With Two WAN)
hi there i have 2 internet connection, One From PPPoE through interface-2 and the other on interface-5 From LTE Modem using DHCP Clint.both of them have Static Public IP address Tied To its own...
View ArticleForwarding Protocols • Re: OSPFv2 neighbor x.x.x.x: state change from Full to...
Also, confirm your OSFP hello-timer just to triple check it's still at the default of 10s.An alternative is to use a GRE tunnel which would traverse the radio link without any fear of multicast packet...
View ArticleBeginner Basics • Adguard Home DNS Container VLAN
Hello Dear Users,I am trying to setup a Adguard Home in mikrotik Conainer as the main DNS server in my home network. I have still couples of problems with it, but first of all I would like you to take...
View ArticleClik here to view.
General • DHCPv6 client, I set a cientid value for option code 1, but the...
The IANA describes dhcpv6 client optinon:2024-06-01_19-24-22.pngcode 1 is clientidSo:I have a pppoe-client named "pppoe-out0001", i need set the clientid for the dhcpv6 client.The "pppoe-out0001" link...
View ArticleGeneral • Re: Deserialize .json SKIN vs. API
I tried adding custom menus to the skin.json but they don't display in webfig. the menu system notes I already use it for other purposes. I also thought about using layer 7 but it's a pain to mess up...
View ArticleBeginner Basics • Basic Zerotier Question.
I have a single device on a local subnet lets say 192.168.88.0/24 on an MT router and it needs to reach a device ( and vice versa ) on a separate router (non-mt, with SIM card) and both have natively...
View ArticleGeneral • Re: Switch Chip VLAN Switching in Software Bridge
For anyone who will find this post and struggling to offload PowerBox PRO (hex poe) to unload CPU because with full bridge VLAN filtering it does around 350-400 mbps tops.Bridging VLAN interface is...
View ArticleGeneral • CCR2216-1G-12XS-2XQ High CPU Utilization
Hi,Ive deployed a CCR2216-1G-12XS-2XQ recently in my network and using it as a edge router for customers with high BW requirements like 5 Gbps to 15 Gbps. The purpose of deploying this was to cater...
View ArticleBeginner Basics • No incoming SMS
Hi I have a very simple question. I use the Ltap LTE6 on my boat for internet access.I use a sim with unlimited data. But, when 10Gb is reached, the provider sends a sms, using that sms i can add...
View ArticleClik here to view.
General • Memory Leak v7.15
Hi,We are a telecommunications operator using Mikrotik as OOB device, and use massively RB4011 + Wireguard + BGP to deploy our OOB.Since 7.15 upgrade, we notice a memory leak progressively growing on...
View ArticleForwarding Protocols • Re: Bgp- signaled vpls and l3vpn issues in 7.10
ROS 7.15 releasedAnybody tried to check this issue in new version ?Statistics: Posted by DEVio — Sat Jun 01, 2024 4:40 pm
View ArticleGeneral • Re: Feature Request: 6VPE (VPNv6) - ipv6 address family
Ok, so 7.15 is out, I tested it in LAB and it does not work. I getting curious and dumped the BGP traffic on links. I found that RouterOS sends incorrect SAFI NLRI for...
View ArticleContainers • Re: Horrible container performance from 7.14 up to 7.15rc2
I got my ax^3 yesterday, updated to 7.15, and am also seeing this problem.The only present container is linuxserver/duckdns:latest, and it takes 10 minutes to start. 2 env strings (domain name and...
View ArticleScripting • Script - Cert name to Variable
Hi Guys, need help...I have some script for renew LE cert, but in my Mikrotik - ipsec identities peer is changed every time to "ca" name, when this script was running... Need get renew cert LE name...
View ArticleClik here to view.
Beginner Basics • Re: Basic Zerotier Question.
I could ask for a diagram So let's assume you ZT – correct if wrong:- You using my.zerotier.com as ZT controller (i.e. not running a local controller under /zerotier/controller on the Mikrotik)-...
View Article