Scripting • Re: New command in RouterOs 7
FWIW, I already had a GitHub project that compiled the REST schema, and as part of that there is an "inspect.json" that get generates with output of /console/inspect. I recently automated it all at...
View ArticleGeneral • Re: How long does it take for MT tech support to respond?
The support is just luv and responds in time.Statistics: Posted by yarimwilliamsrobert — Fri May 31, 2024 8:39 pm
View ArticleBeginner Basics • Re: Increasing wireless range?
can you access the unit trough winbox ?if so try( see the pics below )https://prnt.sc/D9_ousClOpPithenclick like the pic belowhttps://prnt.sc/AQeBtLLi9C10that must reboot the unit and go back to...
View ArticleWireless Networking • Re: 7.14.3 Hex CapsMan -> capAc - 3rd SSID with VLAN...
As you demonstrated in the video, CAPsMAN is capable of creating interfaces, so unprovision everything and delete those manually created from the CAPs, lets see what will happen.cm01.pngThank you for...
View ArticleScripting • Re: System Script not running
It a bit unclear whether you want to make one array with {1,2,3,4} or two-dim array like {{1;2};{3;4}}.i.e.:local notificationTeam...
View ArticleBeginner Basics • Re: IoT devices disconnect every 10 seconds
Thanks for replay.I try 1500 MTU (both on the AP and RB)The issue still remain IoT device disconect and reconnet every 10 secondsStatistics: Posted by Kataius — Sat Jun 01, 2024 1:28 am
View ArticleUseful user articles • Re: Bypassing AT&T Residential Gateways with MikroTik
The bridge bypass also works for Frontier FiberOptic GPON in Connecticut, which is former AT&T Fiber, but the condo was constructed after the sale. I didn't expect it to work but it did. Years of...
View ArticleGeneral • How to use PoE?
Hello everyone.I use Mikrotik hap ax3 which is connected via PoE using MikroTik RBGPOE. Before I connect lan cable to the router, want to divide it to more devices using some PoE switch or any other...
View ArticleBeginner Basics • Device Isolation
I am trying to isolate devices within one of my bridges. Is Auto Isolate an option do in the bridge section, or is the firewall the way to go? (see attached)Statistics: Posted by mcponcall — Sat Jun...
View ArticleWireless Networking • Channel reselect interval issue after upgrading to 7.15...
Hello,Since upgrading to 7.15 from 7.14 'wifi1' is requiring the "Reselect Interval" under channel settings to be defined. I tried hiding the setting by clicking "^" then apply, but nothing....
View ArticleClik here to view.
Wireless Networking • Re: hAP ax3 + Realtek RTL8821CE 802.11ac = bad wifi speed
Good news, the laptop fell from 2 meters and got completely destroyed.Empirical testing of maxim eleven? https://www.schlockmercenary.com/2008-12-11Statistics: Posted by jaclaz — Sat Jun 01, 2024 2:30...
View ArticleBeginner Basics • Re: Device Isolation
I typically tend to use vlans to separate subnets at layer2 and firewall rules at layer3.For firewall rules my last rule is DROP, and thus anything not accepted above in previous rules in that chain,...
View ArticleClik here to view.
Forwarding Protocols • Port forwarding for Hikvision DVR
Hi all,I am newbie with Mikt port forwarding, and with Mikt OS... I kindly ask for your support in configuring port forwarding for my Hikvision DVR, to be able to connect to it from any remote...
View ArticleUseful user articles • Re: IPSEC/IKE2 (with certificates) VPN server guide...
Many Thanks!RB5009UG+S+IN RouterOS 7.14.1 Success!Wow..Hi hsin, can you post speedtest when on the VPN connection.?Now i plan to setup on my router...Regards/WichetsStatistics: Posted by tuiespacecorp...
View ArticleGeneral • Re: Discussion: managing and refactoring years of technical debts...
The second approach, which would be my preferred approach in this scenario, would be to sit down with pen and paper, Excalidraw or xMindMap, to map out your networking requirements. Forget about the...
View ArticleGeneral • Re: How to use PoE?
So you want to power the PoE switch using the AP's power line and have that power other APs with PoE? What is you current DC adapter wattage rating?I think you best bet would be getting a new PoE...
View ArticleClik here to view.
General • Constant rebooting of RBwAPR-2nD&R11e-LTE
Dear friendsI own a WAP LTE kit (RBwAPR-2nd&R11e-LTE) and was working with no problem using 7.13.4 firmware.I decided to update the OS from 7.13.4 to 7.15 through automatic update (in winbox)....
View ArticleClik here to view.
Wireless Networking • Re: How can i improve my wifi speeds?
Hello holvoetnFirst of all thank you for taking the time to educate me!Then i am sorry not having replied until now but got flooded with work and other things and had to put aside this for some time.I...
View ArticleScripting • The issue of a function containing variables unsuccessfully.
Code: # Define the global function:global DNSStatus do={ :local actionValue $1 /ip firewall nat $actionValue [find comment~"hack_dns"];}# Set the action value and call the function:global DNSAction...
View ArticleGeneral • fiirewall error PPTP VPN
Hello,We have installed multiple Mikrotik routers on remote locations, which are VPN connected to RHEL linux server with PPTP client. Time to time someone of routers produces this error and generally...
View Article