General • Re: EoIP tunnel not comunicating
Your linux machine firewall has to be blocking ping responses from 192.168.114.0/24 because that is correct and will work. Really no other option you must have something like ufw running and forgot to...
View ArticleBeginner Basics • Re: About "Building Your First Firewall" ICMP...
Why, none of those things are required for port forwarding.For extra protection. I can't guarantee that the server and the software are safe (has no security flaws) so it's better to block at least...
View ArticleWireless Networking • Re: Triband device?
That's sad as the concept was pretty neat.Statistics: Posted by vingjfg — Mon Dec 04, 2023 7:26 am
View ArticleWireless Networking • Re: Wi-Fi 6E devices for an new project
I think you will need to wait a little bit longer... But who knows, maybe Mikrotik surprises usStatistics: Posted by gigabyte091 — Mon Dec 04, 2023 7:47 am
View ArticleWireless Networking • Re: Spanning Tree on Access Point
This doesn't make sense.The recommendation to use RSTP does refer to use of hAP ax2 or hAP ax3 as CAP. But, it doesn't refer to use of any switches or existence of L2 loops in the ethernet topology.If...
View ArticleGeneral • Re: wireguard peer client-* properties
It looks like these properties don't affect anythingI've tried different values on both sides - nothing happenshave no idea what are they forStatistics: Posted by chuq — Mon Dec 04, 2023 10:06 am
View ArticleWireless Networking • Re: WiFi with Apple Products
Thanks a lot JhonL. for those posts... but it didn't work for me... my MacBook 12 disconnects after a minute or so... and after that, I have to switch wifi on it off and on to be able to get it...
View ArticleContainers • Re: Caddy reverse proxy with automatic lets encrypt.
I use Caddy with automatic LE certificates running on top of RouterOS in container, it works like a charm. In fact, the only thing I needed for certificates to work is the following lines in config...
View ArticleRouterOS beta • Re: Custom Hotspot HTML Redirection is not working on v7.1
pues parece que todo es igual tengo mismo problemaStatistics: Posted by suserevent — Mon Dec 04, 2023 10:21 am
View ArticleContainers • Re: container ipv6 gw not work
As of 7.12.1 I have IPv6 in containers working stable. Tested both from inside (/container shell 0, then ping 2001:4860:4860::8888, for example) and outside (ping container address from a third...
View ArticleClik here to view.
Beginner Basics • Re: one ip range for lan, other for wifi
Add iot interface to LAN interface list. (Interface -> list -> members)Thank you! With Iot interface added to lan list - everything works exactly how I want.netmask=2 was typo :/I have one more...
View ArticleForwarding Protocols • Re: ROSv7 BGP VPLS with Cisco IOS-XR
I figured out what the problem is. The problem is that a $3,000 router cannot send the following attributes in updates:1. EXTENDED_COMMUNITIES2. MP_REACH_NLRIBecause the processor architecture is ARM...
View ArticleScripting • Passing a parameter from a script to another script
Hello everybody! This is not GPT! My question is: I want to pass a parameter from one script to another. What's easier, you say, do it through global variables. But I want to do without variables (the...
View ArticleAnnouncements • Re: NEW FEATURE: Back to Home VPN
Hello,I use BTH between an iPhone and an Audience. The Audience is behind a CGNAT (LTE) network. A reboot of Audience is necessary every day for it to work. Audience is connected to the internet but...
View ArticleBeginner Basics • Re: Hap AX Lite LTE6, use Ether1 as primary
Follow-up question. I mentioned that everything is already working, where Ether1 is WAN, and LTE is WAN backup whenever Ether1 is down. I used my TP-link LTE router to plug into my Ether1 and act as...
View ArticleGeneral • Ipsec not traffic passing
Hello, I've set an ipsec tunnel between a Miktrotik an a checkpoint firewall.I managed to stablish phase 2, but I see no traffic on the tunnel. I went trough some existing posts here on the forum, but...
View ArticleGeneral • Locked Out of CCR1009 After Disabling Auto Negotiation
Hello everyone,I'm facing a challenging issue with my CCR1009 and would really appreciate any help or suggestions you can offer. While the router itself is functioning normally and distributing...
View ArticleContainers • Re: A question about ram-high
The support confirmed:The 'ram-high' value in the '/container/config' is set for all containers collectively.Statistics: Posted by Kentzo — Mon Dec 04, 2023 8:05 pm
View ArticleClik here to view.
Wireless Networking • Re: hap ax2 + wireless access points
Moca I knew but g.hn is new for me.Interesting....I'm not finding any real applications right away or I don't know where to look ... ? Is it still more in the theoretical sphere ?EditAh, it looks like...
View ArticleClik here to view.
General • Re: Route internet traffic from one VLAN to exit via specific IP
Just got a hap ax3 and I am trying something similar but I have different networks and not VLANs at the moment. What worked for me is the same as your config except that I have no routing rules. Try...
View Article