Beginner Basics • Re: Wired mesh network?
Wired is always better for connecting APs. Always.1 router as capsman controller, your choice if you pick a plain router or a wifi router.1 AP per floor (minus 1 if the router is also providing...
View ArticleAnnouncements • Re: SwOS Lite version 2.18 released!
Final ordeal:it's (again) S-RJ10 acting up. It can not be controlled to set lower speed.Statistics: Posted by holvoetn — Thu Mar 07, 2024 11:27 pm
View ArticleGeneral • Re: Static DNS FWD and To AddressList, problem with cache and routes
I apologize for not paying attention to the thread before I got sick, I had some thoughts.I'm glad that we made progress in solving the problem and that I was able to help a little.I think it's a good...
View ArticleGeneral • Re: IKEv2 mtu issue
@sindy. Thank you very much for your fast and, most importantly, quality help.There was an expected serious error in the NAT configurationTo which Sindy pointed out, I followed the wrong path of the...
View ArticleGeneral • Re: RB5009UPr+S+IN power problems?
CSS610-8P went in this morning. Logged in to the access points and cranked them up to full power.No reboots.Customer is happy.Putting the RB5009UP into the "Do not order column".Statistics: Posted by...
View ArticleScripting • Re: Is 8MB in a variable from a txt file is possible?
Hi Here,I worked on two scripts, where I copied rextended's script (please don't hate me for this).The logic is:1 fetch the file in X file splits,2 imports one by one and then deletes them all.The...
View ArticleRouterBOARD hardware • Re: CCR2004-1G-2XS-PCIe Problems
Good evening, at the moment I have managed to get the ether-pcie1 and 2 to show up as running. When I try to use the passthrough mode on SFP+1 the card crashes and the log shows the following two...
View ArticleBeginner Basics • Re: CRS310-1G-5S-4S+IN I can’t manage to setup trunks on...
Program the CRS3 line with bridge vlan filtering as described here.https://www.youtube.com/watch?v=YLtGQAQ8iS0&t=82sStatistics: Posted by anav — Fri Mar 08, 2024 12:52 am
View ArticleBeginner Basics • Re: WireGuard Handshake issue protonvpn
Is it working now??Statistics: Posted by anav — Fri Mar 08, 2024 12:52 am
View ArticleWireless Networking • Re: CAP AX - CAPSMAN- no DHCP lease [SOLVED]
I think I have the exact same problem; CAPSMAN is provisioning the right configuration to the HAP AX3, clients can connect succesfully but the DHCP response from the router doesn't seem to land at the...
View ArticleGeneral • Re: Sonos Across VLANs in 2024
This works on my bench...Code: /routing pimsm instanceadd disabled=no name=pimsm-instance1 vrf=main/routing pimsm interface-templateadd disabled=no instance=pimsm-instance1...
View ArticleContainers • AdGuard Home container fails to connect to TLS servers
While testing an AdGuard Home (ADH) container in a HAP AX3, I was unable to use TLS upstream domains.When I try to use a TLS server, ADH fails to test the upstream DNS or respond to a client...
View ArticleBeginner Basics • How to DST-NAT trhough 2 mikrotik and 2 ISP
I have done the normal dual nat configuration, deleted the nat from the second mikrotik router and it works fine. In another client I am presented that the second mikrotik has to take the user's...
View ArticleBeginner Basics • VLAN interfaces assigned directly to the bridge verses a...
Desired outcome...Port1(WAN) is subjected to untagged traffic and vlan66 tagged traffic. VLAN 66 tagged is passed to all ports in the bridge and vise a versa, while the untagged traffic on port 1 is...
View ArticleBeginner Basics • Re: VLAN interfaces assigned directly to the bridge verses...
What are the requirements for traffic flow that describes all users, devices, cherry picking a port is almost useless to give advice on,,,, configs are integrated animals.A network diagram will help...
View ArticleBeginner Basics • Re: How to DST-NAT trhough 2 mikrotik and 2 ISP
Single NATRouter 1 incoming on WAN port ---> dstnat to LAN server Double NATRouter1 incoming on WAN port ----> dstnat to LANIP of next routerRouter2 incoming on fixed IP WAN port ----> dstnat...
View ArticleGeneral • Not possible to set up SSL with NAT and port forwarding inside VLAN
Hi everyone,For over a week now, I've been trying to change my home lab network setup using a MikroTik router, transitioning from a single LAN for all services to several VLANs for different services,...
View ArticleBeginner Basics • Re: WireGuard access to LAN resources
Adding to this topic as I believe I am having the same issue. I am quite new to MT products. I have a HAP AX3 (only a few weeks, replaced pfSense VM to isolate Network from Server) and am using stock...
View ArticleWireless Networking • Re: CAPsMAN <> cAP config and behaviour is...
First off, thank you very much for your input and feedback, I really appreciate the help you have so freely offered.Apologies for the delayed update here, work has been a little wild the last couple...
View ArticleRouterBOARD hardware • Re: GPON ONU module to replace ISP GPON router
Short version: This won't work, and probably never will (sadly).Unless your ISP feels like supporting a 3rd party ONT, which would be extremely rare, then you're probably stuck. I've had a play with...
View Article