General • Re: Require help/advice with Bridge and VLAN's
Concur with points above, as erlinded indicated once finished setting up all the vlan related settings go back to bridge and set vlan-filtering to YES.As far as /interface bridge vlan settings its...
View ArticleBeginner Basics • Re: Router OS v7 Dual WAN
Just need two rules for sourcenat.Sourcenat is not a firewall function or a routing function!!!add action=masquerade chain=srcnat out-interface=ether2 add action=masquerade chain=srcnat...
View ArticleClik here to view.
General • Re: Help! Simple question? Blocking internal rogue IP?
Hi Jay5son,I tried to do exactly that but despite googling and youtubing my rule doesn't seem to block it Statistics: Posted by danriis — Wed Mar 06, 2024 2:17 am
View ArticleBeginner Basics • Hotspot user splash pages
Greetings AllJust got Mikrotik RB5009 with dmaRadiusManager working here. Except the behavior of the user splash pages is erratic.I have installed LetsEncrypt SSL certificate. hotspot.jfjjajf.org and...
View ArticleGeneral • PoE Compatibility: MikroTik RB3011 & Ruijie RG-RAP6202(G)
Hello!Please answer only if you are an expert I have a MikroTik RB3011 UiAS-RM, which has an Ether10 port that supports passive (PoE) output. This port has an auto-detection feature and operates at a...
View ArticleSwOS • Re: 10G link CRS305-1G-4S+ with CSS610-8G-2S+ [SOLVED]
Interesting on the Chinese SFPs. I am also using non-Mikrotik 10G optical SFPs in my CSS326 switches, and they are working great - and were A LOT less expensive then the Mikrotik SFPs. It is well...
View ArticleUseful user articles • Re: 📌 Tool: Using Splunk to analyse MikroTik...
I upgraded an rb750Gr3, upgraded v5.3 to v5.6, and then saw the scene as shown below. I understand that the serial number is not displayed, but for what purpose is the other attributes not displayed?...
View ArticleWireless Networking • Re: Problems aiming nRAY
Don't worry about the alignment arrows, its not the correct way to align the 60ghz products anyway, but at 50 metres it doesn't matter. You can spin the dish 70 degrees to the side and still get over...
View ArticleWireless Networking • CAPsMAN <> cAP config and behaviour is baffling...
I have recently installed a 5009 with 3 cAP ac access points in my home. I have updated the wireless packages to use wifi-qcom and wifi-qcom-ac, respectively, and gone about setting up the configs as...
View ArticleGeneral • Re: PoE Compatibility: MikroTik RB3011 & Ruijie RG-RAP6202(G)
Nothing will happen, RB3011 will not see compatible device and will not output power to it. Be careful not to have PoE forced on, then it will output 24V all the time. Also, to be extra safe you can...
View ArticleWireless Networking • RB924i-2nD-BT5&BG77 Knot IoT Cellular operating mode
Hi, is it possible to change the cellular operating mode from Cat M1 to NB-IoT on the Knot via the MikroTik phone configuration app?Statistics: Posted by jaip — Wed Mar 06, 2024 6:55 am
View ArticleForwarding Protocols • Re: ROS7 OSPF routes inactive
In version 7 logic is changed. If no accepted by filters, they are will populate routing table but Filtered. Create filters (subnets, or for /32 is up to you) then select filters for in and...
View ArticleGeneral • Random reboots on RB4011 since 7.13/7.14
SInce a few days, my 2yo RB4011 is randomly rebooting."router rebooted without proper shutdown, probably power outage" is in the logs, but there was no power outage, voltage is looking good at 23.7v...
View ArticleWireless Networking • Re: CAPsMAN <> cAP config and behaviour is...
Wave2 capsman is in base ROS package since 7.13.Remove wifi-qcom package from RB5009.Statistics: Posted by holvoetn — Wed Mar 06, 2024 8:28 am
View ArticleUseful user articles • Re: mDNS between VLANs with just bridge filters - Look...
mDNS uses link-local IPv6…Statistics: Posted by DarkNate — Wed Mar 06, 2024 8:32 am
View ArticleGeneral • Re: RB5009 as Mediaconverter for other router.
Expensive media convertor ... but yes, quite possible.Statistics: Posted by holvoetn — Wed Mar 06, 2024 8:16 pm
View ArticleGeneral • Bridge mode in Mikrotik
Hey, so i have a RB3011 running in my data centre, and RB2011 running in one of my sub stations. I am using PPPoE service for authentication, and i previously had to create new users/secrets in the...
View ArticleGeneral • Access Mikrotik router without wifi and ethernet
Hello My friends..!sorry if my question seems illogical but I disable my mikrotik router wifi Accidentally and I don't have access to it physically to connect to ethernet, is there is a way to re...
View ArticleThe Dude • monitor CCQ
Does anyone have a step by step guide to adding ccq?Statistics: Posted by paulinotel — Wed Mar 06, 2024 8:51 pm
View ArticleGeneral • Re: Access Mikrotik router without wifi and ethernet
You will be able to access it physically, through an ethernet cable. If your computer does not have an ethernet port, you will need to find a cable transition from the port that is available for your...
View Article