Hello!
Please answer only if you are an expert
I have a MikroTik RB3011 UiAS-RM, which has an Ether10 port that supports passive (PoE) output. This port has an auto-detection feature and operates at a voltage of 24V, outputting approximately 2V below the input voltage(22V) but it doesn’t support with IEEE 802.3af.
On the other hand, I also have a Ruijie RG-RAP6202(G) which supports the IEEE 802.3af/802.3at PoE standard and operates with a power supply of DC 12V/1.5A.
I know it is not logical to connect them but might be something I’m missing, so I’m asking to know, would it be safe and feasible to connect the Ether10 PoE port of my router to the Ruijie RG-RAP6202(G) PoE Lan port
thank you
Please answer only if you are an expert
I have a MikroTik RB3011 UiAS-RM, which has an Ether10 port that supports passive (PoE) output. This port has an auto-detection feature and operates at a voltage of 24V, outputting approximately 2V below the input voltage(22V) but it doesn’t support with IEEE 802.3af.
On the other hand, I also have a Ruijie RG-RAP6202(G) which supports the IEEE 802.3af/802.3at PoE standard and operates with a power supply of DC 12V/1.5A.
I know it is not logical to connect them but might be something I’m missing, so I’m asking to know, would it be safe and feasible to connect the Ether10 PoE port of my router to the Ruijie RG-RAP6202(G) PoE Lan port
thank you
Statistics: Posted by Wan077 — Wed Mar 06, 2024 2:57 am