General • Re: Two same subnets in difrient location
Check this: viewtopic.php?t=215744Statistics: Posted by BartoszP — Tue Apr 29, 2025 5:59 pm
View ArticleBeginner Basics • powerbox pro setup as switch/ no IP from DHCP client from NVR
Hi,I followed the basic procedures to set up the Powerbox pro as a switch to connect to the NVR:•Factory reset device with no default config•Create a new bridge and all add all ports to bridge•Set...
View ArticleBeginner Basics • Re: Extend wifi in small house
There would be no problem with a wired only version, just plug in a wifi AP at the other end............Statistics: Posted by anav — Tue Apr 29, 2025 7:00 pm
View ArticleForwarding Protocols • Re: v7.18.2 ECMP and Layer-4 Hash - is it working?
I wonder if this is related to what I'm experiencing (was going to create a new post, but this seems to be concluding in the same direction). I have a CRS310 connected to three servers, each of which...
View ArticleMikroTik hardware questions • Re: RDS2216 Experience
It works perfectly with Proxmox - but not an easy slot in solution, although with the direction of VmWare possibly worth investigating.I also had trouble using NFS to be honest, thought from what I...
View ArticleMikroTik hardware questions • Re: Netinstall on RM3011 Fails need help...
I'm still basically stuck where I started. Newer netinstall does not work on one RB3011 but does on the other. And I'm not perfectly clear why.All of these posts are indeed confusing and sorry if I...
View ArticleMikroTik hardware questions • Re: Any Chance for a CRS610-8P-2S+IN
2 Years Later and still waiting...Statistics: Posted by gotsprings — Tue Apr 29, 2025 8:36 pm
View ArticleWireless Networking • Re: 60 Ghz link shows constant traffic
I hit align on the transmitter side. Connection dropped. When I turned off align... unit reconnected. 18 M is gone.Statistics: Posted by gotsprings — Tue Apr 29, 2025 8:37 pm
View ArticleGeneral • Connection Reset Errors
I have an Apache2 web server behind my RB4011 (10.74.2.10) and I am trying to resolve an issue. Whenever an external user attempts to upload files or perform certain actions on a hosted web site, they...
View ArticleClik here to view.
General • Re: E50UG os downgrade
So , I have lost my entire day but after many resets and many changes I made it It’s not enough to make a limitation profile and bond it with profile but you have to made it also on user group …Very...
View ArticleGeneral • Re: Multicast/OSPF over ZeroTier
The only other approach is abuse BackToHome (BTH) - that does deal with CGNAT and is just WireGuard under the covers. i.e. if a site had a fixed public IP, and LTE back... BTH be same as WG when...
View ArticleGeneral • vlan translation
Hi all, Is it possible to have a CRS326 (ROS7) translate an inbound svid to a cvid?Statistics: Posted by harley — Tue Apr 29, 2025 10:12 pm
View ArticleWireless Networking • CAPsMAN controller missing on hAP ax lite (L41G-2axD)...
Hello MikroTik community,I am trying to set up CAPsMAN controller on my hAP ax lite (L41G-2axD) running RouterOS version 7.18.2.My goal is to manage other CAP devices (including other hAP ax lite and...
View ArticleBeginner Basics • Basic VLAN setup
Hi,I am a bit new to mikrotik and especially to VLANs. I already read a few topic about mikrotik vlans but i am sill struggling..I would like to install some IP cameras but due to their nature I would...
View ArticleGeneral • Password recovery with lost stickers
Hi.I new to the forum so first of all I want to share my greetings with everyone. I have a question:Is there a procedure for regaining access to an Nray device that has been reset and the factory...
View ArticleWireless Networking • Re: CAPsMAN controller missing on hAP ax lite...
Capsman as a separate menu item is part of wireless package, legacy wifi.That package is normally NOT on AX devices.You can mix old and new capsman (as two different controllers but on the same...
View ArticleGeneral • Re: Password recovery with lost stickers
1. Check the manual. It's usually taped on there too.2. Contact your vendor. They usually get a list from MT with passwords.3. Branding Package 4. (not sure) custom script with netinstall that sets...
View ArticleBeginner Basics • Re: Basic VLAN setup
Provide a diagram and a clearer description of the requirementsDoes the NVR need to be on the same subnet as the cameras?One can access the NVR by IP address and not have to be in the same LAN...
View ArticleBeginner Basics • Re: Primary gateway with static ip address not activating
Lets set the rules straight here!!!TWO RULES OF THUMB (scope & target scope): First Rule. The resolving route (DIRECT - connected route) with dst-address TO the "real WWW IP (dns site)" and with...
View ArticleScripting • Re: Append Bridge vlan values
That only work if VLAN already existed in /interface/bridge/vlan. Now you would have the bridge vlan entry if you already had a /interface/vlan in 7.16+, since one be created dynamically. But...
View Article