General • Re: How to setup ikev2 psk on sub routeros behind NAT and main...
My GUESS is that it is like L2TP, etc with psk.The only way the client can know the server is correct is if it has the right endpoint address, (and the right psk)And a part of the NAT T negotiation is...
View ArticleClik here to view.
General • Re: IPsec certification/authentication problem
So how does the certificate the Strongswan presents to the Mikrotik look like now?openssl x509 -in <certificate-file-name> -noout -text -purposeThe thing is that I do use a Strongswan responder...
View ArticleMikroTik hardware questions • Is my RB5009 dead?
I've got an RB5009 in my lab and it certainly seems dead. Woobm on USB port shows nothing via telnet or Web UI. I plugged the power in while holding down the reset button for 30 seconds waiting for...
View ArticleMikroTik hardware questions • Re: Is my RB5009 dead?
Check power supply.See if you can use another one with the required range for RB5009 (24V-57V).You can also try PoE In as power source.Statistics: Posted by holvoetn — Tue Apr 22, 2025 9:30 am
View ArticleAnnouncements • Re: v7.19beta [testing] is released!
@MT if you truly start the development of EVPN + VXLAN could you please update the routing protocol overview page and include RFC 7432 to make it official and for our peace of mind :) roadmap...
View ArticleGeneral • Re: where is “openflow“ on routeros V7.18？
I think it is only available on RouterOS V6, where it is part of the extra package (just checked, but you probably did that already as well...).Strangely enough it is shown on the help.mikrotik.com...
View ArticleWireless Networking • Re: wifi qcom ac devices loosing virtual interfaces?
You can always reset the CAP to CAPS Mode and add VLAN settings. Firewall seems unnecessary afaik. Hope it helps...There is nothing I can see that could cause your problems.Statistics: Posted by...
View ArticleGeneral • 5G Modem for ltAP mini ?
Hello everyoneIs there a plan for a 5G Modem for the ltAP mini ?lg RichardStatistics: Posted by roe1974 — Tue Apr 22, 2025 10:54 am
View ArticleScripting • Re: script to add bulk of users to UserMan
( On v6 web interface exist "add batch" and you can download the list of generated users. )Statistics: Posted by rextended — Tue Apr 22, 2025 11:06 am
View ArticleContainers • Mosquitto - 401 when trying to install from docker
Hi all,Get an error message when trying to install the Mosquitto container.Earlier I succeeded in installing the HA container on same RB, but on this one I'm stumped.Config:Code: # 2025-04-22 10:03:44...
View ArticleContainers • Re: [cont] not ok registry auth response: 403 when adding a...
If you’re getting this error, try adding the registry you’re using in the beginning of the remote-image field. So for me, cloudflare/cloudflared:latest was not working. It started working when I...
View ArticleGeneral • Respond for the internet connection through which they connect.
I apologize for the English; I'm using a translator.Good morning, I'm explaining my situation here, requesting help with this configuration.I have a Mikrotik router with 5 fiber optic internet ports,...
View ArticleBeginner Basics • Back To Home is very slow ~1MB/sec on RB4011 with wifi
Hi all,I'm using the Back To Home VPN functionality, and my speed is extremely slow ~1MB/sec.I tested via 4G or Wifi ISP wifi router.The CPU usage when testing the throughput is around 10%, and the...
View ArticleGeneral • AX3 as basic AP/switch
Two questions please:1) How can I confirm that the config below matches what would on this forum be labeled as "used as a switch and not as a router?" (Yes, I know about the other thread: I started...
View ArticleClik here to view.
Beginner Basics • Re: DST-NAT for multiple wan addresses
So you could just add this rule without spending time for preparing network diagram Maybe this would help with lack of gateways on PLC's and HMI's:Code: chain=srcnat action=src-nat...
View ArticleGeneral • Re: AX3 as basic AP/switch
once wifi interface was involved even it has switch chip it will processed by the cpu anyway.Statistics: Posted by loloski — Tue Apr 22, 2025 1:07 pm
View ArticleAnnouncements • Re: Question to our users about controllers
My two pennies on the subject is coming from the point of view of someone that needed more than was offered by other manufacturers but coming to Mikrotik with a knowledge of consumer kit not...
View ArticleSwOS • Re: 5Gbps link speed
Hi,I think the correct way to connect would be to set the link speed to 10G no Auto negotiation for the 10G RJ45 SFP+ ports in SWOS.And a short ethernet cable, (to make sure that isn't part of your...
View ArticleAnnouncements • Newsletter #124
https://mt.lv/news124Read our latest newsletter and learn more about:- our first outdoor Wi-Fi 6 CPE: SXTsq 5 ax- ROSE Data Server Maintenance Parts- how to mount two CSS318-16G-2S+IN switches...
View ArticleAnnouncements • Re: Newsletter #124
Finally, an ax CPE. Let's hope we get a Disc 5 ax and a DynaDish 5 ax as well.Statistics: Posted by FezzFest — Tue Apr 22, 2025 2:27 pm
View Article