Forwarding Protocols • Port forwarding for Hikvision DVR

Hi all,
I am newbie with Mikt port forwarding, and with Mikt OS...
I kindly ask for your support in configuring port forwarding for my Hikvision DVR, to be able to connect to it from any remote locations, via hik-connect portal.
The cams are visible on my mobile Hikvision app.

Here are my DVR ports:
HTTP Port: 80
RTSP Port: 554
HTTPS Port: 443
Server Port: 8000


Here is my device, as it appears on hik-connect portal:
my DVR DS-7104HUHI-K1my_(dynamic)public_ip/80Online

Up till now, I was using a Cisco RV042G router, with three simple Forwarding rules, and everything was working perfectly (see attached picture).
Please note that I have pppoe internet connection, via a fiber GPON modem, and the IP is not fix.

I have tried different NAT rules, from some tutorials on youtube/internet, but each time I try to login remotely from hik-connect portal, I get my Mikrotik admin page (see attached printscreen too).

I also attach my config file, slightly edited for some sensitive info.

Late edit: I have tried to change www port in MikroTik Services from 80 to 81, but still not able to connect to DVR from WAN side via hik-connect portal, which is pointing to port 80.
Probably some dstnat rule has to be configured, but I have no ideea how to do it.

PS. Couldn't figure it out how to copy the config file as a code in here at this post
But this is a side problem...

Thank you for any suggestions and support!

Statistics: Posted by idanromik — Sat Jun 01, 2024 4:09 am

---