General • lo-Interface loopback

Hey There!
Im new in this forum,I would like to share my "issue" on my home mikrotik routerOS v7.14.1 (hAP ax2).
After reboot on interfaces appear a loopback interface with lo name,and when i remove it manualy it appears again on next start automaticaly.
Well- it hasn't giving me any trouble/issue of working out the connection etc. but seems like it looking annoying and it loks weird since it appear again even if I remove it manualy.
Maybe someone has this "technical issue too" or intuite is leading me something is missing from routerOS.
my bridge conf as below:

0 R ;;; TRUNK-20,200
name="BR_LAN" mtu=auto actual-mtu=1500 l2mtu=1568 arp=enabled arp-timeout=auto mac-address=4C:XX:8A:XX:XX:DC
protocol-mode=rstp fast-forward=yes igmp-snooping=no auto-mac=yes ageing-time=5m priority=0x8000
max-message-age=20s forward-delay=15s transmit-hold-count=6 vlan-filtering=no dhcp-snooping=no
port-cost-mode=short

1 R name="BR_VLAN200" mtu=auto actual-mtu=1500 l2mtu=1564 arp=enabled arp-timeout=auto mac-address=4C:XX:8A:XX:XX:DX
protocol-mode=rstp fast-forward=yes igmp-snooping=yes multicast-router=temporary-query multicast-querier=no
startup-query-count=2 last-member-query-count=2 last-member-interval=1s membership-interval=4m20s
querier-interval=4m15s query-interval=2m5s query-response-interval=10s startup-query-interval=31s250ms
igmp-version=2 mld-version=1 auto-mac=yes ageing-time=5m priority=0x8000 max-message-age=20s forward-delay=15s
transmit-hold-count=6 vlan-filtering=no dhcp-snooping=no port-cost-mode=short

Thanks in ADVANCE!

Statistics: Posted by djteck33 — Mon Mar 18, 2024 3:08 am

---