Support asked me to try it in Linux which I did and still fails the same way on TFTP Stage.
I tried BOTH booters Factory and upgraded.
Just not the first time and I ask questions as I go along.
I also sometimes miss some things or don;t undertand them or have to go back and read again until I do Which I have done and have written about but you do not pay attention to that
And still insist with some attitude days later after I have understood and figured it out.
I never really thought anything was "hacked" but tried to make it clear I did not have an understandable way of verifying that it was not.
I'm also able to netinstall with older netinstall software but not with newer and that is my point and wanted to better understand why.
Anyhow also fails in Linux with either booter. (support asked me to try this).
It does TFTP for while then fails and reboots.. as detailed in the forum.
[Main Booter]:
RouterBOOT booter 7.6
RouterBOARD 3011UiAS
CPU frequency: 1400 MHz
Memory size: 1024 MiB
NAND size: 128 MiB
Press Ctrl+E to enter etherboot mode
Press <delete> key within 2 seconds to enter setup
trying bootp protocol........................................................................................................................................................................................................... failed
kernel loading failed
loading kernel... OK
setting up elf image... OK
jumping to kernel code
Starting...
Starting services...
MikroTik 7.6 (stable)
MikroTik Login:
[Backup Booter]:
RouterBOOT backup booter 3.27
RouterBOARD 3011UiAS
CPU frequency: 1400 MHz
Memory size: 1024 MiB
NAND size: 128 MiB
Press <delete> key within 2 seconds to enter setup
trying bootp protocol........................................................................................................................................................................................................... failed
kernel loading failed
..
loading kernel... OK
setting up elf image... OK
jumping to kernel code
Starting...
Starting services...
MikroTik 7.6 (stable)
MikroTik Login
I tried BOTH booters Factory and upgraded.
No you're wrong.. I read and try everything.Sorry you wrote all this for nothing.
OP can't read more than 2 lines in a single post that ignores the others, and you wrote a poem...
viewtopic.php?t=216303#p1140488
It has an ipq8060 chipset and the factory-firmware version is not upgradeable
Despite what was clearly written, he (and the others) insisted in vain.
Just not the first time and I ask questions as I go along.
I also sometimes miss some things or don;t undertand them or have to go back and read again until I do Which I have done and have written about but you do not pay attention to that
And still insist with some attitude days later after I have understood and figured it out.
I never really thought anything was "hacked" but tried to make it clear I did not have an understandable way of verifying that it was not.
I'm also able to netinstall with older netinstall software but not with newer and that is my point and wanted to better understand why.
Anyhow also fails in Linux with either booter. (support asked me to try this).
It does TFTP for while then fails and reboots.. as detailed in the forum.
[Main Booter]:
RouterBOOT booter 7.6
RouterBOARD 3011UiAS
CPU frequency: 1400 MHz
Memory size: 1024 MiB
NAND size: 128 MiB
Press Ctrl+E to enter etherboot mode
Press <delete> key within 2 seconds to enter setup
trying bootp protocol........................................................................................................................................................................................................... failed
kernel loading failed
loading kernel... OK
setting up elf image... OK
jumping to kernel code
Starting...
Starting services...
MikroTik 7.6 (stable)
MikroTik Login:
[Backup Booter]:
RouterBOOT backup booter 3.27
RouterBOARD 3011UiAS
CPU frequency: 1400 MHz
Memory size: 1024 MiB
NAND size: 128 MiB
Press <delete> key within 2 seconds to enter setup
trying bootp protocol........................................................................................................................................................................................................... failed
kernel loading failed
..
loading kernel... OK
setting up elf image... OK
jumping to kernel code
Starting...
Starting services...
MikroTik 7.6 (stable)
MikroTik Login
Statistics: Posted by Michiganbroadband — Fri May 02, 2025 4:29 pm