Respected Sirs, good afternoon!
I have 3 L009UiGS routers with different firmware - 15.1, 15.2 & 17.2, installed in 3 different locations with different ISPs.
IPSec tunnels are configured between them using the same template. Firewall & NAT rules are also same (please see attached configs).
Traffic between Router2 & Router3 is going fine. But from/to Router1 to Router2 and from/to Router1 to Router 3 - there is no Rx bytes/packets.
I have 2 ideas:
1) maybe there were some changes between ROS 15.2 and 17.2 that require some additional firewall/NAT rules;
2) some problem on Router1 ISP side
Could You please advise how to fix problem with IPSec tunnel from/to Router1 to Router2 and from/to Router1 to Router3?
Additional details will be provided (if required).
Thank You in advance!
I have 3 L009UiGS routers with different firmware - 15.1, 15.2 & 17.2, installed in 3 different locations with different ISPs.
IPSec tunnels are configured between them using the same template. Firewall & NAT rules are also same (please see attached configs).
Traffic between Router2 & Router3 is going fine. But from/to Router1 to Router2 and from/to Router1 to Router 3 - there is no Rx bytes/packets.
I have 2 ideas:
1) maybe there were some changes between ROS 15.2 and 17.2 that require some additional firewall/NAT rules;
2) some problem on Router1 ISP side
Could You please advise how to fix problem with IPSec tunnel from/to Router1 to Router2 and from/to Router1 to Router3?
Additional details will be provided (if required).
Thank You in advance!
Statistics: Posted by DimonZona — Sat Feb 08, 2025 10:28 pm