Beginner Basics • L3 Forwarding, LACP & HW Offloading
Hi, I'm new here to the forum and to MikroTik. I've been trying to dive deep into all the specifics, and having a hard time finding a definitive answer to a specific question regarding L# HW...
View ArticleClik here to view.
MikroTik hardware questions • Re: GPON-ONU not recognized by RB4011
Re my post :"Funny , I was just playing around with my last-remaining still-working Mikrotik GPON SFP module. And although it still works , there is nothing shat shows up on the SFP tab.However , a FS...
View ArticleGeneral • Re: What hardware to buy?
How many ISPs or how may WANIPs will you have and what are the throughputs.Right now I would look at the hex refresh and two or three wifi7 TP link or zyxel APs.If the WAN throughput is greater than...
View ArticleGeneral • Re: Redirect DNS, but with IPv6?
/ipv6/firewall/nat/add chain=dstnat protocol=udp dst-port=53 action=dst-nat to-address=2003:456:789::1/128But the mandatory pre-requisite is to run a new enough release of RouterOS v7. There is no...
View ArticleClik here to view.
Wireless Networking • Re: Guest Network: VLAN vs. Bridge
Thank you for your answers. I think I'll leave it as it is for now and set up VLANs in the future.Bridge works at OSI layer 2 (MAC addresses), IP firewall works at layers 3 and above (IP addresses,...
View ArticleWireless Networking • CAPsMAN on 7.18 to a HAP ax^3 not working
I'm more than a little baffled here. I've followed the instructions on the latest documentation https://help.mikrotik.com/docs/spaces/R ... iFiCAPsMAN but I only get partway there.CAPsMAN is running...
View ArticleWireless Networking • Re: CAPsMAN on 7.18 to a HAP ax^3 not working
Your vlan config is incorrect.Please read this topic carefully:viewtopic.php?t=143620Statistics: Posted by erlinden — Wed Apr 02, 2025 8:05 pm
View ArticleGeneral • Downloading large files over HTTP/S fails
Hello,I have a problem in my network that I don't know how to solve. It happens when I want to download large files (2GB+) over HTTP. In Firefox it says that the download has failed. I can restart the...
View ArticleGeneral • Re: Chateau 5G AX - lte disconnections - error: MAX_ACTIVATED_CONTEXTS
This first started happening to me on a similar device since yesterday, twice during my presence, so I simply toggled the LTE interface both times. which seems to fix it immediately. But according to...
View ArticleScripting • Re: Scheduler does not launch LTE scripts
Weird. It does call it, since run-count is 12. I trust you know the AT command works at CLI, so IDK. My only guess was permissions since Mikrotik does mess them sometimes.Perhaps a wait=yes on the LTE...
View ArticleClik here to view.
MikroTik hardware questions • Mikrotik S+RJ10 sfp+ transceiver is not...
I bought a bunch of the Mikrotik S+RJ10 sfp+ transceivers to use for when i need to convert from rj45 to sfp+ and now seems I am out of luck as Fortigate is not accepting itPlease see screenshot...
View ArticleMikroTik hardware questions • Re: Mikrotik S+RJ10 sfp+ transceiver is not...
I'm not sure what you expect from Mikrotik regarding this. SFPs contain a vendor id in the internal EEPROM, and your Fortigate device does not accept modules with Mikrotik ID. Most big brands are...
View ArticleGeneral • VXLAN / Firewall Interaction
Hello All,I have a lab setup, please look at attached network map and configs posted. The underlying goal is to create a VXLAN between 2 endpoints for multicast traffic. In the lab, I essentially have...
View ArticleGeneral • Re: Unable to send email via smtp.gmail.com
I’ve have the same problem and after hours of looking around I found the solution:Funny how people just do not read instructions: https://support.google.com/mail/answer/185833?hl=enGoogle's support...
View ArticleGeneral • Re: Leaking of IPv6 prefix that's not present on Router
It seems that bad_ipv6 address rules where dropping useful traffic..Statistics: Posted by kryptonian — Wed Apr 02, 2025 11:05 pm
View ArticleGeneral • Re: RB5009: connected link to CRS354 stays down after reboot
Final update: MikroTik acknowledged, that the issue is the RJ01 module itself. All hardware versions of RJ01 will show the issue, when used with RB5009. My RJ01 was exchanged for RJ10/r2 by MikroTik,...
View ArticleForwarding Protocols • Re: v7.18.2 ECMP and Layer-4 Hash - is it working?
Solved the issue, but is not clear to me, why that solves the issue.As you can see on my earlier posted route-export, i have distance 10 for my default-static-routes and distance 20 for default-route...
View ArticleGeneral • Re: Packet loss on bridge/vlan on CRS326
I have ran some mtr tests and after 25,000 packets the results are the following:- Outbound to 1.1.1.1 = 0% packet loss- Inbound to the router's public IP address = 0.3% packet loss- Inbound to one of...
View ArticleGeneral • Re: hap ax3 random wireless disconnects
Nonetheless, I'm staying on 7.14.3 until the problem is resolved (like a lot of people in this forum are doing)...Thanks for this, also reverted my hAP ax^3 to 7.14.3 and did not see any disconnects...
View ArticleClik here to view.
General • Re: ISP CCR2216 L3HW-Offloading Issues
It offloading 4x the amount of routes as my 2116's (which is to be expected), but not 700K routes. @elcano89, how many peers does your 2216 have? I'm wondering what else is in your config that gets it...
View Article
