General • Re: My LHG - LTE18 is having a Stroke. :D
So, MORE updates. Now I have an even bigger, I'd say HUGE issue. During the last 4-5 days, my internet connection during the night has been dead slow to say the least. During the day I didn't notice...
View ArticleGeneral • Re: Issue with 2.4GHz Wi-Fi on hAP ax² After Upgrade to RouterOS...
hAP ax3 - similar story, started after upgrade to 7.18.2. Few minutes after restart 2.4GHz radio is "working" - I can see the SSIDs from my PC, phone etc but could not connect. But then it...
View ArticleGeneral • Re: Wireguard tunnel stopping on its own
Hi allI just wanted to add that I've been suffering the same or a very similar issue.My configuration is:Android telephone with Wireguard clientRouterOS 7.18.2 (stable) - recently upgraded. I used to...
View ArticleWireless Networking • Re: Wifi connects, but no internet
Change your gateway to .254Statistics: Posted by erlinden — Sun Mar 30, 2025 1:10 am
View ArticleGeneral • AP Connect to Config Tasmota?
Here's a riddle for a boring Saturday night:I have a remote location that I am Wireguard-connected to.I am Winbox'd into it at 10.10.100.80At that location there are 4 wifi wall dimmers, all with...
View ArticleBeginner Basics • Re: Simple AP Bridge setup
A small note which is missing from some of the instructions one finds, though it is noted by @w32pamela above. It tripped me up when I changed edge router and did not configure reservations...
View ArticleGeneral • Re: AP Connect to Config Tasmota?
I would temporarily connect one of the wifi interfaces to the given dimmer as a station, assign it an IP via DHCP or static (depending on the setup), and masquerade itStatistics: Posted by TheCat12 —...
View ArticleMikroTik hardware questions • Re: GPON-ONU not recognized by RB4011
Hi Guys,i also own a SFPONU but under the SFP-Tab there is no information at all. Also i can not get a link between Mikrotik and ONU. But ISP is seeing my GPON-Stick and is able to do internal...
View ArticleClik here to view.
The Dude • Dude pops out and close immediately
Hey guys,I´m working for ISP and I got little problem. We got 2 Dude systems. One is working properly everytime, but sometimes when I try to connect to the second one the program only pops out for a...
View ArticleIoT • IOT Lora traffic - show CRC?
Hi all,In IOT Lora Traffic, there is an option (Configuration -> Traffic Options) to "Show CRC errors"20250330IOT Lora Traffic Options.pngRegardless of that setting, the frames with CRC errors are...
View ArticleGeneral • Re: Proscend P180T Overheating in switch
For a more modular solution, you could design a small external cooling housing that houses both the fan and SFP modules, ensuring that airflow is optimized without obstructing other ports.Statistics:...
View ArticleClik here to view.
Beginner Basics • Constant high outbound traffic from ether1
Hi, I have hAP ax^3 with ROS 7.16.1. ISP is just an ethernet cable connected to ether1, identification by MAC address. I alo have static external IP. High and contant level of outbond traffic has been...
View ArticleBeginner Basics • Re: Constant high outbound traffic from ether1
It’s a little early here and I haven’t had any coffee, but I dont see any “input” chain in your ip firewall filter. I assume this means access to your router addresses is open to the Internet,...
View ArticleScripting • Re: Script for email backup file
There seem to have been changes recently to the way the cli completes commands. Make sure your $FILENAME variable exactly matches the full filename of the backup with any extension. It will no longer...
View ArticleClik here to view.
Scripting • Re: What does op type (>[ ... ]) do?
The 10,000 foot view of the (>[]) and its cousin (>{}) is that they are essentially a syntax-checked version of the [:parse], since both interact with the "code" datatype. Code: :put (>[])...
View ArticleGeneral • Logging - What to look for/notify
This might be a looking for solution without a question issue, but I'm trying to gauge what are useful logs to keep and notify about to harden or at least notify about potential issues on my home...
View ArticleWireless Networking • WiFi 2.4GHz b/g/n Setup
Hello,I am currently building my Network using Mikrotik Hardware. The Switch is already running, now I want to do WiFi. All Infos I find online is that for the channel, there should be a b/g/n option,...
View ArticleBeginner Basics • Simple question about port forwarding
I defined port forwarding as belowCode: add action=dst-nat chain=dstnat comment=PS5-TCP dst-address-list=WAN dst-port=987,8572,9295-9308 protocol=tcp to-addresses=192.168.81.108Does this configuration...
View ArticleGeneral • ccr1072 when rebooted gets stuck in reboot loop
I have a CCR 1072 installed. currently it has firmware v7.16 installed.I have a scheduler command where it runs “/sys reboot” once a month. the last 2 times it has run this command the ccr1072 doesn’t...
View ArticleGeneral • Re: routerOS & Mirkotik for the noobs
Hello Everyone,Thank you for your answers and the links!I will try to stick a bit with my hEX sandbox and see if I am able to do something out of it.My main concern, aside the lengthy process to...
View Article