Beginner Basics • Simple LAN with Routerboard and map lite - struggling!
Theatre sound engineer here. I need a simple LAN covering a couple of key areas of a theatre - namely around the mixing desk and in the wings of the theatre. No internet connectivity required. Mainly...
View ArticleForwarding Protocols • Re: EBGP peer is not on a shared network
I'm having this same issue, I have around 70 BGP peers and they all drop at the exact same time and reconnect a few seconds later. I have them peering over wireguard so am wondering if this is due to...
View ArticleClik here to view.
General • Local connection to nated gameserver very slow / high ping
Hi,first of all im very new in Mikrotik and im very happy that i got internet working (btw. my english is not perfect sry)My Setup is a fritzbox as modem, behind it a mikrotik Router.... Connection to...
View ArticleBeginner Basics • Problem with quick setup
Hi,i have a Chateau LTE6 AX router and it came with installed software and preconfigured wifi access (password written on the bottom of the device). This is my first mikrotik device and i made a lot...
View ArticleWireless Networking • mikrotik ax2 low upload speed
please help, very low upload speed via wifi, only 4-10 megabits, download 300 megabits, via cable 300/300, tried different firmware, nothing helpsRouterOS version 7.18.2Statistics: Posted by xtbtch —...
View ArticleClik here to view.
General • Re: Local connection to nated gameserver very slow / high ping
in the time of waiting for approval here, i have done a full backup and after that i restored default configs, made my changes to fit my network, added my wifi and ipv6 but its still the same, very...
View ArticleBeginner Basics • Re: CRS326-4C+20G+2Q+ high CPU with incoming packets
Hi!You're jumping in on the deep end here. What you want can generally be done, but expect a bit of a learning curve on the way. Actually I've helped someone with a setup similar to yours recently and...
View ArticleWireless Networking • Re: mikrotik ax2 low upload speed
To save anyone else the trouble, here are your first instructions:Go to Terminal/export file=choosanameIn the Files menu, Download this fileCode: Paste it here between the code tags, </>Then we...
View ArticleThe User Manager • Showing Total Transferred or Total Download in Status Page?
Hello,I'm using Hotspot with User Manager, configured with Radius.Users have several plans, with limited Transfer amount of data.I need to show them on "Status" page their limit, and usage till the...
View ArticleGeneral • In case of WAN1-LAN1 and WAN2-LAN2 connections, routing between...
Routing between LAN1 and LAN2 in case of WAN1-LAN1 and WAN2-LAN2 connectionHello!I have a problem. I have the setup mentioned in the subject. Two modems, with two public dynamic IP addresses. The...
View ArticleGeneral • Re: router->switch and VLAN routing
Now, if there is an entirely better way (either in hardware such as using a CRS) or ROS (filtering or routing) or VLANing, or some other way, I'd love to hear about it.Since you evidently have Unifi...
View ArticleGeneral • Block OpenVPN connection
Hallo,I have noticed that sometimes i receive in logs:Connection astablished from IP... port.. to...ip Disconnected <peer disconected>i assume someone is trying ports to connect to my router...
View ArticleGeneral • Re: Block OpenVPN connection
Depends on what you want. What ports should be open on your internal network and what port do you want open on your public interface?In addition, please add your config:Code: /export...
View ArticleGeneral • Re: In case of WAN1-LAN1 and WAN2-LAN2 connections, routing between...
Because you are using routing rules to do the WAN1-LAN1 and WAN2-LAN2 force-routing, add this following rule to the top of the routing rule table should re-enable routing between LAN1 and LAN 2Code:...
View ArticleRouterOS beta • Re: vxlan performance?
I've tried offloading on CRS326-24S+2Q+, but Hw: Offloaded status is not active on VxLAN interface.Probably I'm missing some requirements for offloading or it is still not fully...
View ArticleGeneral • No traffic through IPSec tunnel (if opnSense side initiate)
HiWe struggling with IPSec tunnels where we have between opnSense FW's and a Mikrotik CCR1009-7G-1C-1S+opnSense:local net: 10.0.172.0/24WAN Endpoint: 11.33.55.77Config:Code: connections {...
View ArticleGeneral • Beginner VLAN questions
Hello,I'm relatively new to mikrotik [and networking in general] and am trying to setup a few VLANs for my home network. Specifically, right now I'm trying to setup a management VLAN (99) as a...
View ArticleClik here to view.
MikroTik hardware questions • Re: CCR2004-1G-2XS-PCIe Reset not resetting
I had the same problem.I solved it! Necessary: a working card, an eprom programmer with the ability to read bios chips at 1.8v, I used a ch341a The procedure is as follows 1. Backup the bios of the...
View ArticleClik here to view.
Scripting • Re: Netinstall how to run custom setup script without default...
Hi, some days ago i had the same problem.I'm using 6.49 version of netinstall and of routeros on rb750r2.In the past already deployed hundreds of them specifying the script with -s namefile.rsc and it...
View ArticleClik here to view.
General • Re: My recent VLAN fiasco
@sindy @erlinden I thought I were starting to understand, but I am lost again I am not sure about the difference between a purely trunk bridge-the-port or an hybrid bridge-the-port. Why would I chose...
View Article