Wireless Networking • Provisioning not respecting name-format setting when...
Capsman is running on cAP AX, newest 7.13.2 ROS. When own/local radios are set to local provisioning, they get provisioned through the provisioning rules, however name-format setting is not applied....
View ArticleBeginner Basics • Best approach to VLAN
Hi there,I'm moving my home network from DD-WRT to an RB3011. Currently my home network has 3 VLAN:VLAN4 - Local 192.168.2.xVLAN10 - IoT 192.168.10.xVLAN20 - Guest 192.168.20.xSome port on the...
View ArticleBeginner Basics • Re: Best approach to VLAN
You are not the first with this question, hence my advice to search on the forum befor starting a post.Here is a great tutorial on VLAN's:viewtopic.php?t=143620Statistics: Posted by erlinden — Tue Jan...
View ArticleGeneral • Re: Wireguard peer interface irregularly stop working
RB5009 with ROS 7.12.1, encoutering the same issue with Wiregauard.Statistics: Posted by starlingus — Tue Jan 16, 2024 6:35 pm
View ArticleBeginner Basics • Help: Edge switch between FW & ISP
Hi folks! Thank you in advance for reading, and double thanks if you choose to help.I've got 2 firewalls in active/passive which need to communicate to a single ISP. Currently, $20 unmanaged switch is...
View ArticleForwarding Protocols • Re: ROSv7.2.1 RIP Configuration
Enable connected redistribution and set up output routing filter to accept only specific prefixesHOW? (to do this filter)?Do you filter in RIP instance?What is the logic?What is the syntax?Statistics:...
View ArticleScripting • Re: ip-scan
Add additional command argument as-value and output then can be passed to variable or other command argument. It will not be same output as printed on CLI, as-value returns key-value array, but that...
View ArticleGeneral • Winbox problem conection
Good afternoonI have winbox version 3.38. to connect to an rb1336. and it disconnects me from the session all the time. The CPU reaches a maximum of 6% and has disk space and memory. Any suggestions...
View ArticleRouterBOARD hardware • LtAP LTE kit upgrade
I own this product RBLtAP-2HnD&R11e-LTEI wonder if I can upgrade it by using the extra miniPCIe slot, so that I gain 5g connection (which is available in my area) or at least lte carrier...
View ArticleWireless Networking • LoRa in CRS125 not work
Hallo,please, I have connected LoRa R11e-LR8 to USB with an miniPCIe adapter. I see LoRa in USB resources, but not detected in LoRa module.Can anybody help me what to do?Thanx a lot!Statistics: Posted...
View ArticleBeginner Basics • Re: Join CAP ax XL into a capsman config
Hi holvoetn,could you find any informations about the counters on the wifi interfaces?Statistics: Posted by grutmic — Tue Jan 16, 2024 8:49 pm
View ArticleBeginner Basics • Re: RB5009 switch ACL ports=switch1-cpu not filtering
Technical support responded. The lack of filtering of the switch1-cpu port is an error. It is unknown when it will be fixed.Statistics: Posted by Shazhenla — Tue Jan 16, 2024 8:58 pm
View ArticleRouterBOARD hardware • Re: Wifi connection deteriorated with USB device attached
Solution was to plug it on short USB 2.0 extender cable which killed USB3.0 and issue disappeared.I also did this as temporary solution, works, will try the tin foil wrapping of cables and stick at...
View ArticleWireless Networking • Re: Maximum MTU Size on virtual WiFi interfaces
So, sometimes, Projects take a bit longer and need to be postponed, but I still got an Issue here:I am trying to send a GET Request from a control server to some smart home devices (thermostats to be...
View ArticleGeneral • Does not go outside the network
Hi to all,with my Mikrotik LTE from few days, I was experiencing difficulties connecting to the internet, but rebooting RouterOS solved it.Yesterday, in an attempt to solve the problem I decided to...
View ArticleClik here to view.
Wireless Networking • Re: Upgraded brand new nRAY 60G master and lost all...
What you did wrong: manually upgrade by dropping package on Files. What you should have done: upgrade through CLI or Winbox, then there would have been 1 package more on your device.I tried to do it...
View ArticleGeneral • Re: Does not go outside the network
6.42.10 ? That's an old version ...RBSXTR:Have you checked the LTE interface ? Is it connected ?Statistics: Posted by holvoetn — Wed Jan 17, 2024 4:35 pm
View ArticleGeneral • Re: Router configuration recommendations
Is all of those rules really needed if NAT is being done on the SonicWall and not the MikroTik? Wouldn't this be sufficient?/ip firewall filteradd action=accept chain=input comment="allow >...
View ArticleWireless Networking • Re: MikroTik hAP ax3 poor WiFi performance
Hoping you get your MT wifi6 soon bpwl, cannot wait for the 'blessed' configuration that works!!Finally got my hAPax2 to test wifi6 at home location. And while reading all these hAP ax3 poor...
View ArticleBeginner Basics • Use public IPs from remote router
Hi community.I have 2 Routers R1 and R2. They have connected in different ISP and placed far for each other.R1 has public pool IPs from ISP: 123.123.123.0/28 (GW: 123.123.123.1)R2 has public IP only:...
View Article