General • Re: Feature Request: PPPoE hardware offloading/multithreading
I do hope that is on their roadmap.Personally, I've only had encountered DHCP FTTH, but there's a lot of people here on the forums with PPPoE FTTH.Statistics: Posted by itimo01 — Sun Feb 09, 2025 9:14...
View ArticleContainers • Re: Unable to install contenairs
Which registry url is set in containers config?Statistics: Posted by optio — Sun Feb 09, 2025 9:15 pm
View ArticleSwOS • Re: No SwOS for CRS310-8G+2S+ ?
any fix or solutions? guide how to switch to SwOS?Update to the latest RouterOS, then follow the steps below:Code: # Update the firmware after routerOS upgrade:system routerboard upgrade# Reboot the...
View ArticleBeginner Basics • Help swapping to Bridge VLAN filtering
Hi all.I currently have a RB5009 setup with vlans assigned to interfaces then assigned to a bridge (see below)However I would like to change this to use the bridge's vlan filtering (Having some issues...
View ArticleGeneral • Re: Winbox "Addresses.CDB" - created permanently
It's probably a bug.By default, addresses are stored in %USERPROFILE%\AppData\Roaming\MikroTik\WinBox, but when you open or save them to another location, WinBox also changes it's default path to this...
View ArticleBeginner Basics • Unable to get inter-VLAN routing to work despite proper IP...
Hi there forum, this is my first post so first of all thanks for all the great work you do here. Mikrotik is definitively not the easiest of ecosystems but boy is it powerful and bang for the...
View ArticleGeneral • Re: Router reaches the Internet, subnets do not
Good, the requirement discussion has started.It would seem you want LAN consisting of 6 subnets on your router.You wish to ensure each SUBNET uses only 1 WAN.1. Are they all from the same Gateway IP...
View ArticleGeneral • Re: Intermittent Reboot Issues with RB5009UG+S+
I might be a faulty hardware issue with your specific device. Maybe you can send it back if still under warranty? I own this same model, and my device went through all release versions of RouterOS...
View ArticleThe User Manager • User manager as radius to use on other access point
Hi,Sorry I'am new in here mikrotik device, and i want to ask, do mikrotik router can act as a radius server to other devices?Here's the detail I want to asked, so my topologi is, starlink -> switch...
View Article3rd party tools • Adguard lists to MikroTik adlist
Free List Conversion Tool for Mikrotik RoutersI’m excited to share a free web tool designed to convert block lists (such as those from AdGuard and traditional hosts files) into a format that’s easy to...
View ArticleBeginner Basics • Re: Help swapping to Bridge VLAN filtering
/export file=anynameyouwish (minus router serial number, any public WANIP information, keys )Dont look at snippets.Statistics: Posted by anav — Mon Feb 10, 2025 12:54 am
View ArticleGeneral • Re: Switch ACL to restrict IP usage
I finally got it working. After fiddeling around it works when I add a rule at the top to allow all traffic on the customer port. After this rule I can add rules to allow the customer IP, and at the...
View ArticleSwOS • 10Gb SFP+ to RJ45 Modules
Hello, I have two CRS328-24P-4S+ running SwOS 2.17 at home (I run RouterOS at work, want something easier at home). I will put two Wiitek 10Gb SFP+ to RJ45 Modules in one for an LACP connection to my...
View ArticleGeneral • Re: REQ: AirVPN / Wireguard fine tune assistance
Thanks for assistance and help!had busy week , so I came to the topic just now...I was able to add 2nd VPN - Swiss for test and seems to be working, but i had to clone most of VPN-Sweden settings.So...
View ArticleClik here to view.
The User Manager • Re: User manager as radius to use on other access point
Yes, I can confirm it working as RADIUS server for authentication and interim accounting with UniFi and Aruba APs. You can also direct the APs to put individual users into their specified VLAN when...
View ArticleScripting • Re: DHCP Lease script to assign IP pool
I don't want to create 2nd bridge and use 2nd DHCP server so my thought was it was possible through script.Question already closed.I just want to keep my configuration as simple as possible.So if...
View ArticleAnnouncements • Re: 📣 WinBox 4 is here 📣
One more issue to my list of 60+ other issues...The problem here is not just a green bubble, the problem is that v4 is actually doing the change, when there were no any changes. Just go to the log and...
View ArticleClik here to view.
General • Re: Firewall rules analysis
Why did you use verbose? Cant read a damn thing LOL............. By the way what is the purpose of sending a config with red lines, rule 1 complete configrule2 no red lines LOLHere is it not...
View ArticleForwarding Protocols • Re: ROS7 and BGP IPv6 Reflectors, still broken?
Back on this. It's the table, breaks rr even on v4.Code: /routing bgp templateadd address-families=ip as=65531 cluster-id=10.50.50.1 disabled=no name="test -v4" router-id=10.50.50.1...
View ArticleGeneral • Re: [Router OS 7.8] DHCP Matcher
I am having the same problem with the Generic Matcher (ROS 7.17.2). I am trying us the hostname (code 12) to determine which pool to assign. Examples from years ago seemed to indicate that the pool...
View Article