Beginner Basics • Static routes L2TP
Hello everyone.I'm new to routing and mikrotik and i need some help, hope you can help med outJust bring questions if there is something you need to knowI have made up a solution with 3 mikrotiks...
View ArticleWireless Networking • Re: All my device prefer 2.4ghz over 5ghz. Mikrotik hap...
But some dual-band devices prefer 2.4GHz and don't roam to 5GHz if they're left to their own will and no amount of support for WiFi mobility (802.11 r/k/v) changes that. One example of such devices is...
View ArticleBeginner Basics • Re: A simple WAN/LAN/DMZ VLAN config to start off
So basically leave it in due to expected incompetence while also leaving security holes in a vlan setup. Bad advice.Unless you can pinpoint where the security issue actually is, this falls under FUD....
View ArticleRouterBOARD hardware • Re: cAP lite 802.3af/at PoE support
Hi,I have several CAP lite (RBcAPL-2nD) that have been working for several years (since 2019).This morning, one of my Wifis was not working, and I found that one CAP lite stopped working. I tried...
View ArticleWireless Networking • Re: Add CAP AX as CAP to RB2011 CapsMan problem
Thanks for the reply. Everything is updated to the latest firmware and I have both versions of Capsman on the router and it works. Will it ever be unified into one version?Statistics: Posted by...
View ArticleGeneral • Re: IPSEC died before rekey
Thank you sindy, it looks hopefully.I'll try it!Statistics: Posted by robertbisom — Wed Feb 05, 2025 12:19 pm
View ArticleGeneral • Block list ?
Hi,Is there such thing as a default block list?We use RB33's, 100's of them. They provide a cellular connection to the web for an RPI which collects sensor data. I have around 10 or so that have...
View ArticleClik here to view.
Beginner Basics • Re: RB5009 switch ACL ports=switch1-cpu not filtering
Hi there,I'm trying to do the same with those rules :Code: /interface ethernet switch ruleadd dst-port=67 mac-protocol=ip new-vlan-priority=6 ports=switch1-cpu protocol=udp...
View ArticleBeginner Basics • Rate my config VLAN/WLAN/CAP/BTH
Hello everyone,I have spent last year figuring out RouterOS caveats and getting things to work as I want. Now that I have politely saved this forum from spamming endless noob questions, I ask you...
View ArticleGeneral • Re: Block list ?
Quick update... after some further investigation it seems that data is being sent when its an initial connection as we just sent a small packet to check the server is available.If we get back an "OK"...
View ArticleGeneral • Is there any OpenVPN TCP connection limit?
Hello,I have set OpenVPN server on mikrotik router CCR1036-8G-2S+ over TCP protocol on port 443.All worked fine with several users, however when there are more users connected (about 7), new...
View ArticleGeneral • Got stuck building IKEv2 w/ MFA for remote client
Hello,i'm quite new to MikroTik. Upto now: i did build a site-2-site IKEv2 tunnel with routing between networks, took some effort but works great now.So i thought i'd use the same router (HexS) to...
View ArticleGeneral • Re: hAP - ERROR: Internal Server Error - after upd: v6.36
Consider to resolve this issue, update the date of your server using below command:Code: timedatectl set-ntp onStatistics: Posted by amingholami — Wed Feb 05, 2025 1:13 pm
View ArticleScripting • Re: Creating a script for sending SMS
Greetings,I just got my Chateau 5G and need help. Is there a good soul who could write me a script? I never used Mikrotik products and would greatly appreciate helping.My ISP has a flat internet...
View ArticleClik here to view.
General • Skins are not working on V7.17.1
On the newest RouterOS the skins are not working, I can design it but I am not able to assign it to groups Statistics: Posted by ebotias — Wed Feb 05, 2025 1:55 pm
View ArticleGeneral • Re: Got stuck building IKEv2 w/ MFA for remote client
Certificate: the IPsec responder has to present the complete certificate chain that starts with its own certificate and contains any intermediate certificates all the way to the root CA - the...
View ArticleGeneral • MikroTik website product list filters bug
Hello,I hope you are well.Offtop for this forum, but I did not find a relevant one.If you select both an architecture filter and an option range filter, one is being ignored. E.g. filtering ARM64 and...
View ArticleRouterBOARD hardware • Re: Replacing a flash drive - problem with the...
Can you post link (even in pm) of the item in aliexpress?It is the wson one?I'm trying to repair an cAP with a bad flash chipStatistics: Posted by ema81 — Wed Feb 05, 2025 11:44 pm
View ArticleGeneral • Problem with Radius Radsec with SNI
Im trying to authenticate against (Server Name Indication) SNI enabled Radsec server, do you have any way to add HOST headers as required by the radsec server.The server is in raw public ip format the...
View ArticleGeneral • Re: Restore corrupted Routerboard with damaged Eth1
I own a RB750Gr3 router that lost ether1 port after an electrical storm. The ether1 indicator doesn't even light up. To get the router operational I performed these steps:1) Changed WAN interface from...
View Article
