Beginner Basics • Re: SSH out via dst-nat
Can you post your config and try to explain in simpler terms what you are trying to do? I think you just want to redirect any outbound ssh traffic somewhere? If that’s the case, it’s a destination NAT...
View ArticleBeginner Basics • inter connect two subnets
hello everyonei have setup my routerboard ( RB750Gr3 ) to have two subnets ( 172.16.160.0/23, 172.16.190.0/24 ) and they both have internet and everything is working as expected, but i need to have a...
View ArticleBeginner Basics • Simple Bridge with Firewall rules for Ether1 (internet))
Dear Forum,please assist me to configure a Mikrotik RB750Gr3 with RouterOs v7.16.2 as a Bridge with Firewall. Ether1 is connected to the internet. Ether 2 to 5 are the internal networt which should be...
View ArticleBeginner Basics • Re: Simple Bridge with Firewall rules for Ether1 (internet))
Is it all? Pleaese export whole config to be checked? Where are addresses assigned to LAN & WAN interfaces?If you want to test your router just reset it to the defaults and everything should work...
View ArticleGeneral • Re: CCR2004-16g-2S+ Dhcp client stays in status "Searching"
Remove SFP ports from bridge "bridge" and let them belong just to WAN list if they are really WAN ports.You can create bridgeWAN and move them to that bridge and assign bridgeWAN to WAN list and...
View ArticleWireless Networking • Re: Audience backhaul issues
All the best for this New Year everyone!Don't forget steeringThank you for bringing this up.I tried configuring steering for two SSIDs, however the configuration doesn't seem to propagate from CAPsMAN...
View ArticleRouterBOARD hardware • Re: Rackmount Question
According to this Reddit post it should be possible.https://www.reddit.com/r/mikrotik/comme ... ?rdt=51649Statistics: Posted by holvoetn — Thu Jan 02, 2025 10:38 am
View ArticleGeneral • Re: How to secure DarkFiber between 2 MikroTik
Not really but Arista, Cisco, Juniper (and many others) all have decent macsec enabled switches. ...if it is just for MACsec securing dark fibre and need to stay on a budget (sort of) consider a look...
View ArticleGeneral • Re: A lot of TCP Retransmits and Dup ACKs
Thanks Sindy,you pinpointed the issue. I limited to MAC and IP Addresses but never to a certain interface. I now tested the same setup with limiting to single interfaces and can confirm that 99% of...
View ArticleAnnouncements • Re: WinBox 4 Beta 14 Bug Problem
...@inazmulwhy are you using my avatar picture?Statistics: Posted by spippan — Thu Jan 02, 2025 5:26 pm
View ArticleGeneral • IKEv2 IPsec / Windows VPN not working
/interface bridgeadd name=LAN10_Bridge/interface ethernetset [ find default-name=sfp-sfpplus11 ] auto-negotiation=no comment="AP1-Local D" speed=1Gbpsset [ find default-name=sfp-sfpplus12 ]...
View ArticleWireless Networking • Re: Samsung TV and Wifi
Got anything in the logs?Statistics: Posted by itimo01 — Thu Jan 02, 2025 5:37 pm
View ArticleWireless Networking • Re: Multi-passphrase co-exist with WPA3?
If you use different SSIDs, it should work.Statistics: Posted by itimo01 — Thu Jan 02, 2025 5:52 pm
View ArticleGeneral • Re: IKEv2 IPsec / Windows VPN not working
Could you surround the config with code blocks, pretty please? You select the config and press the </> button. That way it will be more readableStatistics: Posted by TheCat12 — Thu Jan 02, 2025...
View ArticleGeneral • Re: MT Firewall & DST NAT question
are there supposed to be hits on DST NAT rules for traffic that is not permitted by the FW?Yes, there are. According to packet flow, DST-NAT is part of pre-routing ... and firewall filter rules are...
View ArticleGeneral • Re: Weird problem with vlan access to wAP ax.
Do you have multiple Mikrotik APs ?I have a dozen of mipsbe-wapac, capac, capacxl etc. And capsman to rule em all.What IP address do you have on the client when managing this routerboard? Is it in the...
View ArticleForwarding Protocols • Re: BGP and OSPF on the same interface with BFD
Tweak your BFD settings to be more forgiving of the packet loss or jitter detected on the wireguard tunnel, or don't use it at all. Just keep your BGP and OSPF timers down to their minimums, unless...
View ArticleWireless Networking • New CapsMan Finally working with VLANS. Did it do it right
Most of the documents that I have seen in the web talking about setting up CapsMan relates to a network where Microtik provides all the services. The network that I had to work with was more complex...
View ArticleScripting • Re: Using the CHECK Endpoint API on AbuseIPDB
I did finish it but I don't use it anymore because I realised it was adding bad IP addresses to my blacklist (legitimately). It got to 10,000 entries and thought I was probably anonymous enough that...
View ArticleClik here to view.
General • Re: IPsec tunnel not working
so i dont know what happened i am now able to ping the sophos from behind the mikrotik and from the sophos itself to the mikrotik but not behind the sophos i think i need a route on the sophos end or...
View Article
