RouterBOARD hardware • Re: disc lite5 boot problem ( RBDisc-5nd )
If you want to netinstall your device then you need to setup your network parameters manually as described on Mikrotik wiki pagehttps://help.mikrotik.com/docs/display/ROS/Netinstall bu çözüm değil....
View ArticleRouterOS beta • Re: New User Manager in RouterOS v7
I think in newer Android phones it is mandatory to install the root certificate on the phone (assuming you do not use certificates issued by an official certificate authority). In older versions you...
View ArticleGeneral • Re: Help Troubleshooting DualWAN configuration.rsc
Enter the first part up to the IP address, then press TAB.It will show you which entries are possible from there on.You may want to check this page for differences in config moving from ROS6 to...
View ArticleClik here to view.
Beginner Basics • Re: Trouble with port forwarding through a Wireguard VPN
It's perfectly reasonable. When you have this "remote public address" that you use to forward ports from there to devices in your LAN, then the router possibly being one of those devices is not any...
View ArticleRouterBOARD hardware • Re: LhG5 AC/SXTsq 5ac issue: Can`t upgrade the Backup...
I suggest you to open ticket with support@mijrotik.com ... they will likely ask you to provide supout.rif file (to see actual state of your device) so you may want to provide that file when opening...
View ArticleRouterOS beta • Re: Routing filter to discard routes
sorry for beating the dead horse, can someone shed some light on why discard is no longer available in ros v7?Statistics: Posted by loloski — Sat Dec 30, 2023 1:25 pm
View ArticleGeneral • Re: Reverse SSH port tuneling
I have a server to which I have connected devices by SSH (Linux SBC) for remote access and managment (the devices are on public internet "over the world").Sometimes I use mikrotik before this devices...
View ArticleScripting • Re: DynDNS Script from Mikrotik Wiki (correction)
Interface can have multiple addresses, so the script is bad at the start...Statistics: Posted by rextended — Sat Dec 30, 2023 1:35 pm
View ArticleGeneral • rb5009 lock out
Hi all,I updated my rb5009 to v7.13 (not sure this is the source of my issue) and while trying to log in a few days later I can login with my credentials, neither winbox, webfig nor ssh work, is there...
View ArticleClik here to view.
General • Re: Policy based routing
While drawing the diagrams, I have eventually decided on simplifying the network setup to minimise the complications.Thanks a lot, @Sob, for feedback re. the routing marks - I will re-use the info in...
View ArticleBeginner Basics • Inter-VLAN routing (unable to reach clients from VLAN)
Hello guys, I was playing with some VLANs on my router as I intend to transfer everything to a new router and remove one of the switches. For this I'd need few seperate VLANs - main vlan, survaliance,...
View ArticleWireless Networking • VLAN Trunk over WiFi for SOHO networks - use EoIP or else?
I want to create VLAN trunk over WiFi to extend L2 for multiple VLANs (private SSID, guest SSID, management VLAN and else) to utility building, that is shielding half of the yard and then add AP to...
View ArticleWireless Networking • Re: VLAN Trunk over WiFi for SOHO networks - use EoIP...
Thinking about this ...Maybe, is it possible to just use multiple VLANs through this one (dedicated) SSID? The station-bridge mode wasn't available previously for WifiWave2 driver - when I did the...
View ArticleGeneral • Re: Dual WAN PCC ok but no web browsing
What about other config? Is there perhaps fasttrack in /ip firewall filter?Statistics: Posted by Sob — Sat Dec 30, 2023 3:00 pm
View ArticleBeginner Basics • Re: Inter-VLAN routing (unable to reach clients from VLAN)
THe easy way to do this is to modify the concept of the default firewall setup which is allow everything block a few things, to Block everything and allow only needed traffic.Hence this ( and in the...
View ArticleGeneral • Re: BGP peer goes down, no ACK for 60 minutes
Try rolling back to 6.48 which I had a number of CCR1036 running that and BGP with a number of junipers for a long time.I have long since migrated all the CCR1036 to 7.12 as it wasn't that...
View ArticleBeginner Basics • Re: Help with first home server
This is a perfect case for BTH!In this case we will establish a VPN tunnel from the router to the BTH mikrotik relay server and then all remote users will have a pathway to reach the router.In this...
View ArticleGeneral • Re: How can I protect my VPN network from attempted intrusion?
Rextended has a script you put in scheduler to run every 5 mins that puts them in a bruteforce_blacklist which you drop on raw filter. Limits the annoyance in logs. That is about all you can do.Code:...
View ArticleClik here to view.
General • Re: Establish communication through a VLAN between Mikrotik router...
You had it right with the VLANS initially but you need to understand the /30 establishes a network between the devices BUT ONLY for those IPs.The switch will only know about 10.0.0.0/30 not any other...
View ArticleBeginner Basics • Re: IPv6 Prefix Delegation PPPoE with VLANs
If you have dynamic IPv6 prefixes, you can add static ULA address (from fd00::/8) on your LAN and this one address can be used as DNS server for your clients.Statistics: Posted by matd — Sat Dec 30,...
View Article