Wireless Networking • Re: Capsman + Wifi station ?
Theoretically what you CAN do, is create a virtual wifi interface not connected to capsman and set that one in station mode.Even with old capsman or legacy wifi devices this is possible.PS don't throw...
View ArticleWireless Networking • Re: Migrating a mesh of RB952Ui-5ac2nD to single...
Still no definitive success with that zone: 2.4: `security.connect-priority=1 .ft=yes .ft-over-ds=no steering.neighbor-group=foobar .rrm=yes .wnm=yes` 5: `configuration.tx-power=16...
View ArticleGeneral • One Client with Two L2TP using different WAN to Two WAN L2TP Server
Hello Mikrotik expert. I do apologize with my english . I have a Branch with 2 ISP's installed and HO with 2 ISP's with following configuration. Branch : ISP 1 -> IP Public Static ISP 2 -> IP...
View ArticleBeginner Basics • Re: IoT question - wifi
Why so many VLANs ? Keep it simple, just put all IoT in one VLAN, including your assistant. Especially if you are new to Mikrotik environment because as you saw yourself there is no one click magic...
View ArticleSwOS • Re: Host learned on Trunk port instead of physical one
Never seen that one...I don't normally have a LAG on any of my CSS326 switches, but when I have had one, the connected devices correctly showed up in the hosts table on the correct ports.What version...
View ArticleGeneral • Can't get PCC load balancing to work
Hello,I'm trying to configure PCC load balancing on my v7 Mikrotik but no luck so far. there's barely any traffic that goes through WAN2 if no traffic at all! when I disable WAN1 the traffic starts to...
View ArticleScripting • Re: Send a unicode symbol to Telegram from an array list
Code: :return (($Symbols->$1) . "\EF\B8\8F");If desired, you can return as many characters as you want from your array:Code: :return (($Symbols->$1) . ($Symbols->$2). ($Symbols->$3)....
View ArticleAnnouncements • Re: v7.12.1 [stable] is released!
I was able to import an ed25519 public key. But using:HostKeyAlgorithms ssh-ed25519on my client ssh config fails with an error:Unable to negotiate with 192.168.3.1 port 22: no matching host key type...
View ArticleBeginner Basics • Re: Nat rules
So I understand that you want to use the same name both inside and outside your local network, is that correct? If not, can you send your current configuration, with sensitive bits redacted?You can...
View ArticleWireless Networking • Capsman virtual interface best practices
Hi Folks, trying to improve my home system, I wonder if there are any best practices for a frequency setup in Capsman:here is the WiFi - Setup Part of my Router's config:/caps-man configurationadd...
View ArticleGeneral • ping behaviour in ros7
Started to move my estate to ros7, there's a few differences I can get used to, but the most annoying one is with pingIn ros6 I can do "/ping 1.1" and get a response printed a few milliseconds later,...
View ArticleGeneral • Port forwarding from Cisco to Mikrotik
Hi all,I have a bit of a problem, We have a BT leased line and the router is managed by BT. It’s a bit of a rubbish as we pay like £600 a month for a leased line but if we want to do anything slightly...
View ArticleGeneral • Re: Locked Out of CCR1009 After Disabling Auto Negotiation
Recently, I disabled auto negotiation on ether1 but forgot to use the safe mode. Unfortunately, ether1 was the only port through which I was able to access the router. I attempted to connect another...
View ArticleRouterBOARD hardware • Hardware Availlability
Hi guysIs it just in South Africa or is anyone else struggling to get Mikrotik hardware. We hav'nt had any availlable for months now and it seems like its going to take a few more months to get...
View ArticleGeneral • Re: RB5009 offering DHCP leases to other switches
dhcp_primary offering lease 192.168.0.5 for C4:AD:34:F4:36:4F without successHave you identified the device? Is it yours? Silly question but valid.If not, according to the mac it is also a Mikrotik...
View ArticleClik here to view.
RouterBOARD hardware • Re: hAP ac^2 Store Full no boot
Is there a way to alter the bundle package and disable not used packages like in ancient times? This way you could save some space. I have one AC2 that lies dormant and -ahem- would gladly delete wifi...
View ArticleGeneral • Re: Slow VPN only in One Direction
VPN slowed to 180 Mbps or 22.5 MB/s. I think 180 mbps pretty decent performance for mt7621a.Its official test performance for aes-128-cbc +sha256 at 1400 mtu is 472 mbps.I use 750gr3 for ipsec with...
View ArticleBeginner Basics • Re: IPv6 on only one vlan?
Hopefully this makes sense... just learning draw.io and probably one of the only network diagrams I have made since, oh, 1995 or so!Everything seems to be working fine on L2 and Ipv4NB: ipv6 currently...
View ArticleWireless Networking • Re: Wi-Fi 6E devices for an new project
No. It took longer for AX, because ...The transition to AX is still underway, no wAP AX, Audience AX devices yet. Also there are no point to point AX devices yet.Taking into account that Mikrotik...
View ArticleClik here to view.
Beginner Basics • Re: Can't make my wifi to use full speed, which config can...
Yes, why are you setting speed limits here, and wondering why speed is limited? Code: /caps-man ratesadd basic=6Mbps name="GN Only - No B Rates" supported=\...
View Article