Beginner Basics • Re: IoT devices disconnect every 10 seconds
I have the same issue after updating to 7.15 but when I downgrade to 7.14.3 IOT connect normalmaybe the OP can compare your config vs his, and that way see if it is config problemStatistics: Posted by...
View ArticleForwarding Protocols • Re: PIM-SSM Support
Any news on this issue? I recently got a mikrotik router and have the same problem getting telekom iptv to work.Statistics: Posted by dsoell — Mon Jun 03, 2024 5:53 pm
View ArticleClik here to view.
General • RSTP - What the hell?
Hello,Long story short, I've got two DCs and since I can't link them via Layer 2 networks, I am having two bridges. On each of the switches (4 in total), I've got two bridges:one for the local DC...
View ArticleGeneral • Re: RSTP - What the hell?
Isn't it MSTP clashing with PVST+ protocol? Try to set same MSTP type everywhere.Statistics: Posted by BartoszP — Mon Jun 03, 2024 6:47 pm
View ArticleGeneral • Access to second subnet from mikrotik's net
Hello, I am having problems accessing a server that I have connected to an Archer 6 router.My configuration scheme is something like this:Internet -> Mikrotik rb750gr3 -> Switch -> Archer 6...
View ArticleGeneral • Re: Access to second subnet from mikrotik's net
router behind a router behind a router.Is Archer configured properly to pass traffic to server?Could you send a drawing of a network and connections + IPs assigned to ports?Statistics: Posted by...
View ArticleGeneral • Re: IPsec: payload missing SA error
It looks like there is a mismatch in phase 1 configuration. Can you share the diagnostic logs from Azure's VPN? Capturing the packets might on the router by sniffing may also be helpful to see what...
View ArticleBeginner Basics • Isolating one ethernet port from Wireguard VPN
Hello, I have a working wireguard configuration with the settings:(wireguard1 interface created with my specific keys)ip routes add dest:0.0.0.0/0 gateway:%wireguard1ip routes add dest:VPN Endpoint...
View ArticleSwOS • Re: Weird issue SwOS 2.16 on CRS312
Okay, after 5 days of uptime, I just had my first post-2.16 upgrade error. My NAS was unreachable on any port, which meant that port 1 (Ethernet), Combo port 2 (Ethernet) and Combo port 3 (SFP) were...
View ArticleBeginner Basics • Re: Isolating one ethernet port from Wireguard VPN
First- Are you connecting to a third party VPN provider??- does ISP provide a public WANIP on WAN2 ( static or dynamic )Second require config:/export file=anynameyouwish (minus router serial number,...
View ArticleGeneral • CRS112 classic bridge vs. switch chip configuration
Hi folks,I have some CRS112 switches for light VLAN switching without any L3 stuff. If you also need PoE, this switch is perfect for the job.I noticed that it's necessary to configure the switch using...
View ArticleBeginner Basics • Re: hap ax3 wifi interfaces
Hi everyoneI just bought a Hap ax3but the wifi interface is gone. even the wifiLED is off. i installed whole extera pakage. but in inteface some times wifi1 & wifi2 still there and some times they...
View ArticleBeginner Basics • Weird routing behaviour
Hello everyone,I've a Mikrotik RB750UP that is configured with a LAN (192.168.26.0/24) (4/5 of the ETH ports under the same bridge - Master Bridge), and 1/5 port that is not under the same bridge, and...
View ArticleGeneral • Re: ZeroTier Gateway Tunneling On MikroTik Device
Appreciate the response! Unfortunately, ZeroTier developers said the exact opposite:Hello,thanks for writing.Mikrotik heavily modified ZeroTier to run on their routers, so most of the config is...
View ArticleScripting • Re: external editor syntax highlighting
Hi All--I took Vitaliy's kate syntax file and modified a little to suit my usage needs (thank you Vitaliy!)Highlighting for Kate (editor in KDE5)Create (if not exist) folder...
View ArticleGeneral • Re: CRS112 classic bridge vs. switch chip configuration
In practice both configurations do the same job, but the APs (Ubiquiti UniFi) connected to ports ether1 - ether8 display subtle differences in behavior depending on the configuration method chosen.I...
View ArticleBeginner Basics • Re: Weird routing behaviour
Are you really getting 192.168.27.1 from your ISP?Statistics: Posted by k6ccc — Mon Jun 03, 2024 9:59 pm
View ArticleClik here to view.
Forwarding Protocols • Bug in RouteTables and Nat Rules.
Hi everyone. I 'll try to tell you the scenario and then tell you the bug.In my corporate we have an rb1100 x2 AH, and I want to limit(traffic shape) the Internet speed of LAN users, so I needed to...
View ArticleGeneral • Re: fiirewall error PPTP VPN
If the 192.168.1.x addresses use a subnet mask of /24 then 192.168.1.0 is not a valid address, so I would expect it to never work.Also use a better VPN protocol than PPTP, fundamental vulnerabilities...
View ArticleClik here to view.
Beginner Basics • Re: Raspberry pihole (ad blocker) different ip than router...
See attached image. The 10.x.x.x mikrotik range cannot be changed and I prefer not to change the router ip assignet as I use it to go back and forth between two sources of internet connectivity.I hope...
View Article