General • Re: Wireguard education needed
Hello all,I have a working wire guard setup 2 endpoints, simple configuration MT both ends 7.12.1, basic default config, and it works. The relevant aspect of setup, Office A, on multi-homed ISP....
View ArticleGeneral • Wireguard education?
I am looking for Wireguard education? anyone can help me with thatStatistics: Posted by kiyre — Fri Mar 29, 2024 4:47 am
View ArticleBeginner Basics • Re: SFP Module S+85DLC03D
Updated to RouterOS v7.14.2 (from 7.14.1) on both CRS and the connection seem stable (for the past 8hrs).Using the same hardware as in previous post and combo3(Auto Negotiation checked) to...
View ArticleForwarding Protocols • Re: BGP - Taking Long time to Announce Subnets
same problem here. For no reason, the announcements take more than 5 minutes to start propagating.Router OS version: 7.14Statistics: Posted by lvdcarvalho — Fri Mar 29, 2024 5:58 am
View ArticleGeneral • pcc starlink bypass dinamic ip and megacable static ip
Hello guys,I share the configuration that i use for starlink in mode bypass and the provider megacable in mode static, the tool netwatch i use a function test when the mikrotik is reboot or lost...
View ArticleGeneral • Re: Appropriate router for 2G internet routing
Can't go wrong with RB5009. It's more than capable of 2Gig routing.Statistics: Posted by gigabyte091 — Fri Mar 29, 2024 6:38 am
View ArticleGeneral • Re: Config returning after reboot
I have a HEXs, but this issue was happening on my RG350 router too (configuration migrated from one to another).HmIt's a brand new device, so it is empty, only confguration was restored. No extra...
View ArticleGeneral • Re: HowTo configure WireGuard in same subnet?
I don't think what you want to achieve (WG Road Warriors being able to access the SMB shares) will work if you let the WG peers be part of the 10.0.0.0/16 subnet. It worked for the post you linked to,...
View ArticleClik here to view.
Beginner Basics • Re: Mikrotik hAP ax3 - only one quick set mode
A binary copy can normally only be restored on the exact same device with exact the same version. You can get away with restore on other device but same model, but even then you may run into problems...
View ArticleGeneral • Re: Vlan don't go on internet
Well you have this rule in the middle of your IP firewall filter:Code: /interface vlan...add interface=Dave name=Security vlan-id=200.../ip firewall filter...add action=drop chain=forward...
View ArticleBeginner Basics • Re: 7.14.2 HAIRPIN working anywhere ?
Hithanks for the idea. Will try it. But for now i needed to switch back to my old router.Statistics: Posted by tesme33 — Fri Mar 29, 2024 9:16 am
View ArticleRouterBOARD hardware • Re: RouterBOARD 564?
I found some none used 564 (original package=as new).1x 564 board =20 euro1x 564 DB with case = 40 euro1x 532A board + 564 board+case+pigtails = used = 50 euroif anybody is interested, ping me....
View ArticleClik here to view.
RouterBOARD hardware • Re: Old RB750 V1 (Not RB750G) will not update to...
May I ask you if your journey to upgrade the RG750 to newer RouterOS and RouterBoot if it went well and resolved ??I can't get it from your messages, and have a Happy Easter.As for the routerboot you...
View ArticleClik here to view.
SwOS • Re: No SwOS for CRS310-8G+2S+ ?
Hello,after unpacking I immideately changed the default OS to SwOS but the switch did not boot up.So i went back to RouterOS (using Reset Button) and ran /system/swos/upgrade to upgrade to the latest...
View ArticleWireless Networking • Re: Cube 60Pro ac Max Distance on 60Ghz?
Are you shure about that? nRay works muuuuuuch better at 66960. Cube should be the sameSince Cube 60G ac and Cube 60Pro ac are different devices.Cube 60Pro ac = 802.11ayCube 60G ac = 802.11adPerhaps...
View ArticleWireless Networking • Re: Client was disconnected because could not assign vlan
Hello,ft-preserve-vlanid=no worked for me, and now it seems to be functioning correctly. Thanks a lot for the help.Statistics: Posted by ondrejstepanek — Fri Mar 29, 2024 11:11 am
View ArticleAnnouncements • Re: v7.15beta [testing] is released!
Why not remove, for example, Mesh from the ROS for ARM?Surely it will be possible to gain a little in the size of the image.Mesh is relatively small at around 75k, that is roughly half the size of...
View ArticleBeginner Basics • IPTV and VLAN
Hi.I have two interface Lists: WAN and LANWAN includes interface 1LAN includes bridge interface, which includes interface 2-10 and WiFiIn order to get the IPTV to work, I need to pass VLAN 2000 from...
View ArticleGeneral • Re: RouterOS USB Ethernet support
https://www.realtek.com/en/products/con ... 56b-s-g-cgStatistics: Posted by collerok — Fri Mar 29, 2024 12:00 pm
View ArticleClik here to view.
Beginner Basics • NAT and reach dhcp clients in router mode from main network
Hello,I am having a main office network, and nanostation that links another branches using nanostation (Router mode) I need to NAT and reach the DHCP clients for Nanostation Router mode from our main...
View Article
