General • Purchasing on Amazon
I'm a US integrator and I have accounts with multiple US distributors. I've been buying Mikrotik from them. In the past, the pricing was comparable with Amazon - except for shipping. Now, it seems...
View ArticleScripting • Re: Automatic NAT 1:1 Rules Update Script for PPPoE Connections
3. **No Interruption of Active Connections**: The script updates only new connections with the new external IP, leaving existing connections unaffected to avoid disruptions.bullshit: if the IP...
View ArticleGeneral • How can I configure my own PPPOE server to access IPV6 under ROS 6.XX?
I connect to the external network using the pppoe client method. After connecting to the network, I established a pppoe server for internal machine dial-up internet access. However, I have found that...
View ArticleGeneral • ROS 7 router one ip via vpn
Hi,I have tried going over most of the tutorials and still can't seem to figure it out since they are for earlier versions of ros.This is my config. I have confirmed the vpn is in running status.I...
View ArticleBeginner Basics • Re: Basic VLAN Access Port
Hello,if you want to create access port you need to untag desired port, not set it to tagged as you did here. ROS will automatically untag you desired port with PVID you set.Also your pool starts with...
View ArticleBeginner Basics • Re: VLAN On Main Router + 2 HAP
Thank you, everyone. My VLANs have already started working.Statistics: Posted by Ready — Thu Mar 28, 2024 7:34 am
View ArticleRouterBOARD hardware • Outdoor Starlink
Hello all, and thank you for having me in the group.I am not very strong at all in all things Wifi, but am reasonably strong at custom fabrication. At least I like to think so.I am designing a sealed...
View ArticleGeneral • Re: Purchasing on Amazon
You can usually find who is the actual seller in amazon marketplace. Then check if they are a real distributor listed in mikrotik.com/buy We have seen some amazon marketplace sellers that do not offer...
View ArticleClik here to view.
General • Re: Help! Simple question? Blocking internal rogue IP?
Thanks all, here's my entire config including the few lines pertaining to the DDOS stuff. Would super appreciate anyone knowledgeable who's willing to take a look.# mar/14/2024 01:04:14 by RouterOS...
View ArticleRouterBOARD hardware • Re: Outdoor 5G?
MikroTik is working on many new 5G products, but it may be a while until announcemnt and then shipping. Until then, maybe something creative like this? https://www.reddit.com/r/mikrotik/comme ......
View ArticleGeneral • Re: Using a gateway from a different subnet
I found a solution.It is necessary to add an additional IP address to the WAN interface of router R2 and route traffic to R3 via this address using SNAT.Settings on router R2:Code: /routing/table/add...
View ArticleWireless Networking • Can I safely uninstall wireless package - hEX
Since RouterOS 13 there are separate routeros and wireless packages.Wireless is automatically installed on hEX router as well despite it has no wireless.Why?Can I safely uninstall it?ThanksStatistics:...
View ArticleUseful user articles • Re: 📌 Tool: Using Splunk to analyse MikroTik...
after disabling cmd_history it seems my CCR did not stop sending info to splunk ...So it might have something to do with that /system/history/print crash ...Statistics: Posted by eddieb — Thu Mar 28,...
View ArticleWireless Networking • Re: Can I safely uninstall wireless package - hEX
Yes, you can. It is installed in case you want to run CAPsMAN. But, if that is not your case of use, it is safe to remove it. Regards.Statistics: Posted by jhbarrantes — Thu Mar 28, 2024 9:16 am
View ArticleWireless Networking • mesh networking using WAP LAR2
Hi everyone. i have an interesting idea. Would it be possible to mesh several WAP LAR2 s using the LORA technology?This would mean that IOT can be connected so easily over long distances by having...
View ArticleGeneral • Re: How to minimize NAT rules for multiple IPs?
I am thinking on doing the same.I have 32 IP address and I want to SRC-NAT my 2000+ clients on them, so I think PCC may work for this.Any thoughts?Statistics: Posted by gabrielpc1190 — Thu Mar 28,...
View ArticleRouterBOARD hardware • Re: Outdoor Starlink
Set the Starlink system to bridged with the Starlink Ethernet adapter, use it as the internet connection on the MIkrotik router. set for DHCP.With our Starlink-Mikrotik setup we needed to open a...
View ArticleBeginner Basics • Load on one of the processor cores 100%
Hello!Mikrotik Model CCR1036-8G-2S+A couple of months ago, periodic freezes (packet losses) began to appear on the network. I began to look into the problem and saw that the load on one core (cpu23)...
View ArticleRouterBOARD hardware • Re: Request for Python Script to Change L2TP Password...
I hope this email finds you well. We are currently exploring ways to automate the process of changing L2TP passwords in our MikroTik routers to enhance our network security measures.Why not setup...
View ArticleBeginner Basics • Re: S2S problem
An exported config would be a good start:export file=anynameyouwishStatistics: Posted by TheCat12 — Thu Mar 28, 2024 10:04 am
View Article