Clik here to view.
General • Re: Interface packet Drops on an octacore xeon with intel nics
Hi - What is the queue of the ether1 interface ? If you increase it, do you have less TX Drops ?Change from only-hardware-queue to some Queue type multi-queue-ethernet-default and increase from 50 to...
View ArticleGeneral • VoWifi - do not work
Hi,I'm struggling already for years with multifunctional VoWifi calls, but from Samsung phones only (S21 & S20, I knew in the past Oneplus 9 worked but had it only shortly). I thought it could be...
View ArticleSwOS • Re: Host learned on Trunk port instead of physical one
Let me do this in my best Rod Serling voice: Little did you know that you were living in the Twilight Zone....Statistics: Posted by k6ccc — Mon Dec 11, 2023 2:15 am
View ArticleGeneral • Re: Winbox export whitespace bug
Yeah not sure what I was smoking the other day.Anyway I figured out the cause, it's the export command with terse. On a wide enough screen you can get away with terse but on a narrow one where the...
View ArticleGeneral • Re: IKEv2 for macOS clients with multiple networks behind the tunnel
Well I tested this setup with StrongSwan Android client and it's the same problem. Only the first network in split-include works.Also tested a Linux client using NetworkManager with the StrongSwan...
View ArticleGeneral • MikroTik RB5009 add artificial latency
Hello guys! I am planning to buy a new router for personal use and i am wondering if there is a any way to add artificial latency to my WAN. For ex i would like to add 50ms to my internet, i know that...
View ArticleGeneral • Re: <ask> POLICE BASE ROUTING v7.12.1 (mangle or raw on ax2)
I apologize, I made a mistake in writing the code above, it should be like below.Which is more EFFICIENT and LOW CPU using firewall MANGLE or firewall RAW?Code: /ip firewall mangleadd...
View ArticleGeneral • Re: VoWifi - do not work
This might not fix your problem but do it anyway and restart from there.Remove 500 and 4500 from the sip helper (service port).Ideally disable the sip helper.Set the udp stream timeout back to its...
View ArticleContainers • Re: Small iperf3 container
Here's a screenshot of the RouterOS profile I get while doing a ~4.1 Gbit/sec test over OM4 to an RB4011 with iperf3 3.16 set for 4 parallel threads:ss.jpgThat's a pretty direct scaling factor: four...
View ArticleBeginner Basics • Re: Forwarding
Yes, setup a VPN network on the fortigate and seek advice on a fortigate forum.Once you have all the information and setup complete on the other router.Modify the configs on the MT routers with the...
View ArticleGeneral • Re: MikroTik RB5009 add artificial latency
Build a linux box to do it.I've successfully done it on a small low powered mini ITX style computer. Something like this.It only works at 100Mb and can only delay for so long before it runs out of...
View ArticleGeneral • Can't block my kids from internet access
I configured my RB5009 router to allow/disallow my kids from internet access by enabling/disabling them in the firewall address-list which works fine. (See firewall rule #8). However, if they are...
View ArticleClik here to view.
General • Re: WireGuard access
Sorry this is an MT forum not a fortigate forum.It was Mikrotik issueWireguard cant get more then one peer ... per interface WG"according to some other posts in mikrotik formum"So i create another wg...
View ArticleRouterBOARD hardware • Hardware power compatibility hAP ax3 and cAP ax
Greetings. There are hAP ax 3 and cAP ax, when the access point is connected to port 5 of the router, the point does not start and works only from an external power supply. Is this how it should be,...
View ArticleAnnouncements • v6.49.11 [stable] is released!
RouterOS version 6.49.11 has been released in the "v6 stable" channel!Before an upgrade:1) Remember to make backup/export files before an upgrade and save them on another storage device;2) Make sure...
View ArticleAnnouncements • Re: v6.49.10 [long-term] is released!
New version v6.49.11 has been released:viewtopic.php?t=202308Statistics: Posted by EdPa — Mon Dec 11, 2023 10:53 am
View ArticleGeneral • Re: IKEv2 connection problem
What does Linux say, exactly before log: ubuntu: 12[TLS] sending fatal TLS alert 'handshake failure'Statistics: Posted by oskarsk — Mon Dec 11, 2023 10:57 am
View ArticleAnnouncements • Re: v6.49.11 [stable] is released!
:) Statistics: Posted by rextended — Mon Dec 11, 2023 11:04 am
View ArticleGeneral • Re: Can't block my kids from internet access
Turn off the router and play with your kids instead of leaving them alone because you want to use the Internet yourself.Instead of wasting time with the firewall, use the Wi-Fi access list to disable...
View ArticleBeginner Basics • Re: Moving from USG to Mikrotik
Yes, you can configure a certain VLAN to route traffic through a VPN. I do this for my guest network, which is a WiFi without encryption on a separate VLAN.@felixka, would you be able to point in the...
View Article