General • Re: Router and switchAP with VLAN, non-management VLANs not...
AP SWITCH CHANGES1- Should only have one vlan entry/interface vlanadd comment="Management" network" interface=LAN_BRIDGE name=MGMT_VLAN vlan-id=992 - Should only have one entry./interface listadd...
View ArticleGeneral • Re: Mikrotik router as managed switch
viewtopic.php?t=204967See the script and see the comments for the ap/switchStatistics: Posted by Mesquite — Mon Feb 26, 2024 1:23 pm
View ArticleBeginner Basics • Re: Multiple WAN, PPPoE and routing challenge
Draw a diagram and nothing is clear.Do you have three pppoe connections, and if so why are you using IP DHCP CLIENT?What type of WAN connections.Is each give you a private or public IP.........Is each...
View ArticleBeginner Basics • Re: 3-ISPs Load Balancing - need help
?????? He has provided updated scripts throughout. ????best documented work I have seen in some time even indicated if changes were made.The pics are also germane and excellent.Exactly what part dont...
View ArticleBeginner Basics • Audience network setup with wifi-qcom-ac
Hey folks!I'm trying to configure two Mikrotik Audiences with the wifiwave2 package. However, I have had limited luck with the CAP setup. Here is what I did step by step:Installed the wifi-qcom-ac...
View ArticleClik here to view.
General • Re: What happened to anav and "The DEFACTO DEFAULT FIREWALL...
I know that this is the mikrotik philosophy, and I'm absolutely ok with that, just to be clear. BUT: if the examples in the documentation would work out of the box, there would be no need for such...
View ArticleGeneral • Precision Time Protocol
Some CRS support PTP in boundary clock mode, listed at the end ofhttps://help.mikrotik.com/docs/display/ ... e+ProtocolIt says there as a note: devices not included in the list below, does not support...
View ArticleSwOS • Re: CRS309-1G-8S+ No link till reboot.
So I reset the configuration and even installed the new 2.16 update, but the issue persists for one of the connected PCs. The other surprisingly works now most of the time, but it's still very...
View ArticleGeneral • Re: migration from RB2011UiAS-2HnD to L009UiGS-2HaxD-IN
If you would like more assistance with piece by pice migration, post the old config and we can try to helpWhy is there no tool available for migrating configuration from older to newer Mikrotik...
View ArticleThe Dude • Re: Security bug Report
Were you under the impression that this is encrypted? Then how would it be magically decrypted? RouterOS has no "authentication by hash" features or API auth keys. Of course it's the administrators...
View ArticleGeneral • Re: How to stop NTP client logging
This should probably work (have not tested, but probably should)/system loggingset 0 topics=info,!ntpStatistics: Posted by aoakeley — Mon Feb 26, 2024 2:59 pm
View ArticleGeneral • Bridge and Independent VLAN learning - VLAN interfaces locked MAC...
Actually it is not possible to change the MAC addresses for VLAN interfaces on bridges.This can be a problem when a device external MAC address in a VLAN is the one that is used on the bridge and...
View ArticleGeneral • Re: Netinstall sending offer, but not installing
This worked for me (hEX Lite RB750r2 and W10p):A simple Switch between Laptop and Router(The router disconnect a couple of times during Etherboot - this is enough to confuse w10)Tried all the things...
View ArticleClik here to view.
General • Really strange issue with one single LAN address
Hello everybody,I have a hex router, behind it I have a local network that is 10.10.3.0/24.Eth 1 is WANEth 2-5 is in a bridge.I have a DHCP range from 220-254.If I connect my PC to it I get an...
View ArticleGeneral • Re: Bridge and Independent VLAN learning - VLAN interfaces locked...
AFAIK it's customary to have same MAC address in all VLANs handled by same hardware interface in many OSes.In addition: this is not a problem at all with IVL as all switches will build their FDB with...
View ArticleGeneral • Re: Really strange issue with one single LAN address
Either you have something in router config targeting explicitly the offending IP address ... or you have another device on the network with said address configured and then it causes MAC address...
View ArticleClik here to view.
Beginner Basics • Re: Help with configuration of a port.
Hello again everybody!Sorry for the delayed response!Good news!!!!!!GREAT NEWS actually!!!!There is no need for additional static ips. Also there is no need for the router with the pppoe session of...
View ArticleScripting • Re: Script to update RouterOS after X days of release
I still use the date stamp right in the release notes that are accessed by the update command.Works perfectly.Code: #This script looks to see if there is a RouterOS update available, if so, it takes...
View ArticleGeneral • How to dst-nat or redirect when routing marks are present
On a router with two ISP connections running 7.12.1 I am using route marks to load balance the traffic between the connections.To do that, in mangle prerouting I assign a routing mark based on...
View ArticleGeneral • Re: Static DNS FWD and To AddressList, problem with cache and routes
It would be nice if they added the timeout option in the DNS Static menu to the address list.I had no better idea than a scheduled script that runs every 1 minute and copies from that address list to...
View Article