General • Re: A place for poetry
A new light in the sky.there are fewer and fewer of us here –We are not alone.Statistics: Posted by rextended — Fri Feb 23, 2024 11:11 pm
View ArticleBeginner Basics • Re: DHCP Starting IP from 192.168.88.2
My RB4011 with a small DHCP pool (10 or 20 IPs) for each LAN and a large number of static reservations, assigns from the top of the pool (on the rare occasions that an unknown device connects). All...
View ArticleRouterBOARD hardware • S-RJ01 SFP+ Modules Getting Stuck in Ports?
Is anyone else having this issue?For my main rack switch it was beneficial to have a split of ~12 gigabit copper ports and ~12 SFP+ ports, but since no such switch existed, I just splurged for one...
View ArticleGeneral • Re: QinQ vlan bridge - help needed
Ok, so the new router, running 7.13.15 does the same thing, so seemingly not related to the old hardware.If anyone has any clues on where I should look it would be greatly appreciated....
View ArticleRouterBOARD hardware • Re: S-RJ01 SFP+ Modules Getting Stuck in Ports?
This issue is related to the design of the S-RJ01 module. We had to rip them out using force during our last migration, unfortunately in some cases damaging the switchport (or NIC) they were...
View ArticleScripting • Re: sxt lte failover
Here is a good reference for dual sim scripts: https://wiki.mikrotik.com/wiki/Dual_SIM_ApplicationStatistics: Posted by martinclaro — Sat Feb 24, 2024 12:49 am
View ArticleGeneral • new mikrotik - how to wipe it?
For people who deal with lots of MTs , what is the current best way to wipe the config on a brand new fresh out of the box microtik (for example a hex or hex S , fresh out of box - let's say). on ros...
View ArticleForwarding Protocols • Re: OSPF link change causes all BGP sessions to drop
@p3rad0xSo are you saying you removed those routes and then are using private IPs for your ospf interfaces? Not totally understanding what the solution was there, however it sounds somewhat similar to...
View ArticleGeneral • Re: new mikrotik - how to wipe it?
netinstall.Statistics: Posted by Mesquite — Sat Feb 24, 2024 3:21 am
View ArticleGeneral • OpenVPN between TP-Link and Mikrotik
Server: ER605Client: HEX-SThe problem:The setup on the ER605 is quite simple and straightforward:Screenshot 2024-02-23 220819.pngAfter that, it creates a certificate file for the clients. An...
View ArticleGeneral • Re: OpenVPN between TP-Link and Mikrotik
Better off doing wireguard IMHO.Statistics: Posted by Mesquite — Sat Feb 24, 2024 3:37 am
View ArticleWireless Networking • Re: Which devices for a wireless link between two...
https://mikrotik.com/product/wireless_wirePoint and shoot.Statistics: Posted by gotsprings — Sat Feb 24, 2024 3:57 am
View ArticleGeneral • removing remote address from all pppoe secret
can i remove all pppoe secret remove address by command ?if possible please let me know the way.Statistics: Posted by m1s3rys1gn4l — Sat Feb 24, 2024 8:49 am
View ArticleGeneral • Re: very simple question
Code: ppp secret unset 0 remote-addresscan i do this for all pppoe user at once ?Statistics: Posted by m1s3rys1gn4l — Sat Feb 24, 2024 8:53 am
View ArticleClik here to view.
General • Re: Wireguard: how to access to SMB active on RouterOS?
Fixed with 7.14rc2 Statistics: Posted by massinia — Sat Feb 24, 2024 9:26 am
View ArticleBeginner Basics • Re: Lot of invalid connection-states
Figured it out myself. Turned out that I wasn't aware of the default allow behaviour of the firewall and was missing a forward drop at the end. Now I added more rules the explicitly allow traffic and...
View ArticleGeneral • Re: removing remote address from all pppoe secret
At your own risk:Code: /ppp secret set [find] !remote-addressStatistics: Posted by rextended — Sat Feb 24, 2024 10:15 am
View ArticleGeneral • Re: feature: show ospf and bgp on snmp
You mean OSPF, BGP routes or OSPF,BGP neighbor/peer status?SNMP support for OSPF and BGP peer status will be added in ROSv7.Currently BGP routes cannot be monitored over SNMP because it can cause...
View ArticleGeneral • IPv6 between bridges
Hello,I have CCR1036 with OS 6.47.10 in production which was configured with separate bridges for the WAN uplink and LAN site, For IPv4 it works now, but I have been asked to add support for IPv6, but...
View ArticleSwOS • Re: Assign ethernet port to existing VLAN
@holvoetn, but OP said that he was given CRS125 and want to configure it in ROS not SWOS.Statistics: Posted by gigabyte091 — Sat Feb 24, 2024 11:03 am
View Article