Clik here to view.
General • Wireguard Site-to-Site Route not working
Hello forum,I have set up a site-to-site VPN with Wireguard.Here are the facts:SITE A:- OPNsense Firewall- LAN IP network 192.168.1.0/24- Wireguard IP 10.13.37.1/24- Public IPv6- No public IPv4-...
View ArticleRouterBOARD hardware • Re: Mikrotik hAP ax2 onboard USB 3.0 pads
On older versions of devices, and perhaps it was related to ROS 6. SoftwareID is linked to the serial number of the device and to the serial number of the memory chip. When the memory chip was...
View ArticleWireless Networking • Re: hAP AX3 slow SMB transfers with MacOS and Apple TV
Hey Guys, I was reading the previous comments and decided to upgrade to 7.14rc2. Unfortunately, after the upgrade, SMB is not working for me anymore.I tried to connect via MacOS and Windows, but it...
View ArticleClik here to view.
Beginner Basics • strange behavior of the system
strange behavior of the system, hangs. there is a main router from which everything is controlled, today it started showing strange logs and crashing, after a reboot it helped for a whileI'm a newbie,...
View ArticleBeginner Basics • IP/Route and IP/Adresses, the "Adddress List"
Working to copy the 2-router network described atCode: https://help.mikrotik.com/docs/display/ROS/IP+RoutingConnectivity is not what I expect: can't use Winbox from LAN 1 to reach Router 2; can't ping...
View ArticleBeginner Basics • how to make lr8 a wifi client
Hi all,Im a netwoking noob. I have a few lr8 gateways around, they are all connected directly to LAN interfaces and they are all working great. Now i have the chance to deploy one on a new roof but...
View ArticleGeneral • Re: IKEv2 no internet for client
Thanks for advice but it does not help. If I change it, it is still not working.The DNS 192.168.1.16 is fully functional DNS server with some additional local names.By my opinion there is some problem...
View ArticleRouterBOARD hardware • Intermittent 4OGbit Link on CRS326-24S+2Q+
Hi Everyone,Just picked up a new CRS326-24S+2Q+ and I am struggling a little bit.I'm using it as a layer2 switch + VLAN's with no routing, so I opted to boot and use it in SwOS mode.I am using 3M...
View ArticleBeginner Basics • Re: how to make lr8 a wifi client
It should not be harder than most other Mikrotiks (i.e. hard, but doable).You will need to connect via ethernet to configure it AND you must be VERY careful to not lock yourself out.Start...
View ArticleWireless Networking • Re: LHG 5 awful tx signal
The two cameras occupy the same post, the east one two feet above the west one (photo), so directionality of the LHG should not be an issue. Both cameras are returning quite adequate signal to the...
View ArticleBeginner Basics • Re: strange behavior of the system
strange logs and crashingShowing logs might helpStatistics: Posted by IlKa — Thu Feb 22, 2024 8:04 pm
View ArticleContainers • Re: CCR1xxx with containers
If I'm able to build a linux with tile-gx support, will my tile CCR1 be able to run containers?No because Mikrotik never released the Container package for them.. I was not happy about this...
View ArticleContainers • Re: how enable container on CHR\x86?
m8, Im shutting down my virtual machine in isp manager via "restart" and "stop" buttonswithout any effect.Is there a third option not in your screenshot? I've had to try them all, one at a time, on...
View ArticleScripting • Re: Script to update RouterOS after X days of release
I ran into this one today. Rather than some "script" based in RouterOS itself, something like this calls for real network automation. Use Ansible or something similar, or custom python code that runs...
View ArticleBeginner Basics • Re: router not broadcasting wifi
On the hAP ax lite, the wifi devices are under "WiFi" section.Wireless should not be there, indeed, unless you want to use CAPsMAN v1 (and I imagine that you need the wireless package).I would suggest...
View ArticleForwarding Protocols • Re: Status of ROS V7 for BGP, MPLS, VPLS
@mrz can U advice please?Statistics: Posted by nichky — Fri Feb 23, 2024 2:30 am
View ArticleGeneral • Re: Assign ethernet port to existing VLAN
What port is your trunk ? I can't see any trunk ports that would carry your VLANs from RB4011.Study this on how to configure VLANs on CRS1xx series of switches: https://help.mikrotik.com/docs/pages/vi...
View ArticleAnnouncements • Re: v7.13.5 [stable] is released!
I do like the "as-array" instead of a generic "as-value" used on grep however — helpful to control the type returned from commands. But "as-array" is how you'd store the results of :grep to a...
View ArticleGeneral • Re: WinBox Software license agreement
Thanks,The approach I was planning does not include any binaries, only scripts and manifest to build the actual flatpak yourself. I find the included Tahoe font from WineHQ does not exhibit proper...
View ArticleClik here to view.
General • Re: Automatic switching default routes
You're right, exactly. The setup looks like this: an LHGG with LTE interface who pass via passthrough the public dynamic IP to the WAN port of a Chateau device. Basically the LHGG acts as a modem, and...
View Article