General • Switch rule using redirect-to-cpu -- does it work?
After looking at the following, I'd like to know if anyone is using a switch rule with redirect-to-cpu that works as expected. viewtopic.php?t=167297 viewtopic.php?t=156021There is a lot of useful...
View ArticleBeginner Basics • Re: Forum rules
Also here you can find excellent post from our member @tangenthttps://tangentsoft.com/mikrotik/wiki?n ... figurationThis should be your first step after connecting to your new device if you are new to...
View ArticleClik here to view.
Beginner Basics • Re: Wireguard on Android not getting internet
Hi Mesquite, thank you so much for the reply. It has been quite helpful. Apologies for the firewall rules are in a mess. I've been doing the configurations in the middle of the night after I put my...
View ArticleClik here to view.
Beginner Basics • Re: actual basics
Well it's not my material but I wanted to add it so beginners can see it. But before that i think that it's proper thing to ask for permission It would be a shame that this fade out when this topic is...
View ArticleGeneral • Re: Wireguard doesn't work and no logs
I've discovered what is happening,Wireguard works fine with the first peer defined on the Peer's list, if I connect with the second one Wireguard doesn't work for it, so I need to devine the second's...
View ArticleWireless Networking • Re: 2GHz WiFi 40MHz width best channel
What about antenna gain? Should I change it as well? How can I check current antenna gain?Statistics: Posted by KaSp3rSky — Sat Feb 17, 2024 7:44 pm
View ArticleBeginner Basics • Re: LXT-010S-H from LEOX and VoIP Vlan config
Could you give more details about your setup - which will be your trunk port and which your access ports? Also, why do you have so few firewall rules?Statistics: Posted by TheCat12 — Sat Feb 17, 2024...
View ArticleGeneral • hAP ax lite LTE6 - no option for ipv4-ipv6 in APN
Morning all.I got a hAP ax lite LTE6 in the boot of my car, being used to connect my Dash cam and other bits to the internet. My mobile carrier, GoMo Ireland, have enabled IPv6 on their network. On...
View ArticleGeneral • Bug? Simple queue causes reboot failure
Hi, I think I might have hit a bug in ROS 7.13. I have an installation with 3 hap ax2 devices (2 APs and 1 router). When I add a simple queue to the configuration to limit the bandwidth of the guest...
View ArticleGeneral • Re: Bridge and VLAN Interface on bridge MTU problem : MTU needs to...
We should be able to put the same MTU as the L2MTU.Generally setting MTU to a random value is wrong. Generally all devices in same IP subnet (which talk to each other without gateway) should have the...
View ArticleGeneral • Re: RB4011 / hEX routers upgrade & VPN connections
The logs in question are due to turned on logging on some of the firewall rules, an input chain one. For the secondary questions, in theory there should be no disturbance of the IKEv2 connection and...
View ArticleWireless Networking • hapax3 wifi 1 & 2 keep disconnecting
Good day!I'm semi new to Mikrotik so please bear with me. I have a hAP ax3 that is running ROS 7.13 & wifi-qcom 7.13. I have set up the wifi with some very basic configurations. It doesn't matter...
View ArticleWireless Networking • Old wireless driver compatibility issue
I'm configuring a hAP ac2 as a wireless client and ran into a peculiar issue. When I do a scan, I don't see some networks, including my own 5GHz AC access point sitting right next to the router. I...
View ArticleWireless Networking • Re: Old wireless driver compatibility issue
Which channel is used by AP (running wifi-qcom-ac driver)? I believe that wifi driver supports U-NII-3 channels (5720MHz and upwards), it seems that they are even preferred. Legacy wireless driver...
View ArticleGeneral • RouterOS - Simple WireGuard Client Setup
Hi All,I wish to setup a simple WireGuard client on my router (hAP ax lite LTE6) that will give me a static external ip address from the host network.I can get this working very simply on my windows...
View ArticleWireless Networking • Audience "wifi3" goes in a unwanted state...
Hellomy Audience become after a while running to a "unwanted state" with interface "wifi3"."wifi3" is not correct working after a while.At a power down / startup the system all 3 interfaces works...
View ArticleGeneral • Re: Bug? Simple queue causes reboot failure
As you seem to understand the concept of VLAN...why do you use mutliple bridges?I would like to advise you this topic, which gives really great suggestions on VLAN:viewtopic.php?t=143620Will continue...
View ArticleGeneral • UPnP not working in ROS 7.14RC1 ?
Seems like UPnP is broken in ROS 7.14RC1.Sometimes the dynamic rule appears, sometimes it does not appear.NAT PMP seems to work correctly.Am i alone ?Statistics: Posted by FIPTech — Sat Feb 17, 2024...
View ArticleBeginner Basics • Pihole - NAT firewall Rule not redirected static DNS
Hello everyone, I've tried several times, made various attempts, but I can't get out of it.I have a Pihole docker on mikrotik.Pihole works.If I turn off the Pihole docker google chrome gives me this...
View ArticleGeneral • Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Hello,any progress with version 7.13.4 or are there still problems?We are thinking of buying 2 switches for the company and after reading this thread I have no confidence in CRS354.I have been...
View Article