General • Re: app for end user on ios
Hello there,Did you mean WinBox or MikroTik app on iOS? Have you try searching for that on AppStore, since I'm not iOS user.Regards.Statistics: Posted by defconfonly — Tue Feb 13, 2024 1:49 am
View ArticleForwarding Protocols • bgp advertising and /29 subnet issues
Good Afternoon all I am hoping for some adviceI have a unknown to me issue i was hoping for some assistance with.I have a cluster of mikrotiks C2116-12g-4s each peering with a different ISP, We...
View ArticleGeneral • Access to forwarded host via external IP don't work
I've setup forwarding to the specific host/port in my local network and this host is accessible from the internet (via different provider), but i can't access it from my network by external ip/port,...
View ArticleBeginner Basics • Re: after subnet change, Winbox has no path to directly...
Sorry about not pulling a new config last night, I was fading fast.Here's the current config, with the 55 subnet in DHCP networks:Code: # jan/02/1970 17:20:56 by RouterOS 6.48.1# software id =...
View ArticleGeneral • Re: Access to forwarded host via external IP don't work
You may want to look into Hairpin NAT.https://help.mikrotik.com/docs/display/ ... HairpinNATorviewtopic.php?t=172380Statistics: Posted by holvoetn — Tue Feb 13, 2024 4:46 pm
View ArticleScripting • Re: /port using the used-by property
Rex, I always read what you write! I try to read carefully, but I don't always understand because of my poor English and the quality of the auto-translation into Russian (I already talked about this...
View ArticleGeneral • Re: Is Mikrotik RB2011UiAS too old for Wireguard?
Thanks for the config. Tired NAT chain=srcnat action=src-nat to-addresses=192.168.1.254 src-address=10.101.206.176 Still stuck at initiating a tunnel connection. The MT is sending out handshake but...
View ArticleBeginner Basics • Re: Same address pool in WAN/LAN
Less interested in hypothetical questions more interested in understanding the requirements.You have an ISP router which you cannot control but you stated going to put in bridge mode.Q1. Can we assume...
View ArticleSwOS • Re: private VLAN for SAN to servers?
...Which means that devices, connected to these two ports, have to be configured for tagged operation as well. Are they? If SAN and servers don't work with tagged VLANs, then you have to configure...
View ArticleBeginner Basics • Re: V7 "routing mask"
@memo009525You are having an issue that you believe (but not necessarily is) the same of the OP.Since you cannot apply (or you can apply but it doesn't resolve the issue) the solution that worked for...
View ArticleBeginner Basics • Re: Mikrotik Model RB2011UiAS-2HnD-IN Internet (WAN) SPEED
One should look at budget and current requirements and future requirements.As most here would state, 350 down and 50 up is pretty decent but most connections are gravitating to 1gig up and down, for...
View ArticleBeginner Basics • Re: RB5009 - invalid mtu 8000 on ether1 any idea why?
Have you checked this: search.php?keywords=radvdStatistics: Posted by BartoszP — Tue Feb 13, 2024 5:29 pm
View ArticleGeneral • Re: Feature Request: IPSEC Improvements
Hello everyone. I am from the year 2050. The current version of ROS is 15.3.5, but there is still no VTI in it.Statistics: Posted by NetHorror — Tue Feb 13, 2024 5:30 pm
View ArticleBeginner Basics • Re: Switch works, except for internet
Ok, after extensive frustration, and breaking the whole thing at some point, it works again, but only at 1 GbE :sSince this is possibly a different issue, I will start a new thread.Thanks...
View ArticleScripting • Re: Test if array is associative, multi-dimensional, or simple list
FWIW, while no "pretty print"... v7.13 has JSON support as built-in functionYip I'm aware thanks, and I expect I will swap to that eventually as I've no interest in reinventing the wheel - I've been...
View ArticleClik here to view.
Wireless Networking • Re: failed to set country - CAP XL AC 7.13.4
Only as a side-side note:Code: # failed to set country# country locked, using ... the suspense is killing me. Statistics: Posted by jaclaz — Tue Feb 13, 2024 6:16 pm
View ArticleBeginner Basics • MikroTik switch and Unifi Switch can no longer negotiate...
Hi all,I have been having issues with the connection between my Mikrotik Switch and Unifi Switch. I have been able to get a connection working if I fix the connection to 1GB full duplex, but...
View ArticleGeneral • RoMON+bond+bridge connection issues
I have the following scenario:3 CRS326 Switches3 CCR2116 routers connected to sfp-sfpplus1-3 which act as trunk ports on SW1 and SW2 (aggregation switches) and they carry some VLANs to link the CCRs...
View ArticleGeneral • Re: CRS 3xx ethernet cable test
Will there be a cable tester for these devices? CRS3xx?Statistics: Posted by Stick1970 — Tue Feb 13, 2024 7:21 pm
View ArticleRouterOS beta • Re: FEATURE REQUEST: full cone NAT
I don't know, seems flaky. Anyway, personally I use IPv6 everywhere, I stopped caring about NATs.How did you test ? Did you use a public Stun server ?I did test with a public Stun server and got the...
View Article