General • Re: Dual WAN parallel setup for only one subnet?
It would seem what you need conceptually is.add check-gateway=ping distance=2 dst-address=0.0.0.0/0 gateway=ISP1 routing-table=mainadd distance=4 dst-address=0.0.0.0/0 gateway=ISP2...
View ArticleForwarding Protocols • Re: Empty BGP session on ROS 7.13.4
BGP in ROSv7 defaults to 'deny all' for route filters, where as ROSv6 was 'accept all'.You need an inbound and outbound filter on the BGP sessions.I have not been able to apply filters to the inbound...
View ArticleBeginner Basics • Re: Mikrotik firewall queues
The default rules are very good,Once you start setting up anything different from the default setup they need to be slighly modified.Change the !LAN input rule to two rules:accept all LAN ruleDrop all...
View ArticleGeneral • Re: WireGuard throughput depending on running torch
Thanks for fast reply. I changed to your suggestion:Code: [admin@MikroTik] > /ip/firewall/mangle/printFlags: X - disabled, I - invalid; D - dynamic 0 D ;;; special dummy rule to show fasttrack...
View ArticleGeneral • Re: Wireguard from Linux not working
@resca, to trace traffic on the Linux box, use for example, "tcpdump -i name-of-wg-interface". On the MikroTik, use Winbox "Tools -> Packet Sniffer" and select the wg-interface to trace packets in...
View ArticleBeginner Basics • Re: Forum rules
Not clear to me from the text that sending a config file has no use if the router is still in the default config, only if changes have been made. Post starts with taking the router out of the box, but...
View ArticleBeginner Basics • RB5009 not getting DynamicIP from Comcast Cable MODEM
Hi, newbie here with RouterOS and having trouble with initial internet setup. Followed the MT 'Getting Started' script mostly to get ether1/WAN to get dynamic IP from Motorola MB7420 Cable MODEM and...
View ArticleGeneral • Working with Mikrotik and Netgear Prosafe Layer-2 switches
(Cheeky question)I posted last autumn about trying to set-up a friend's B&B in Croatia with Mikrotik router/access points but using a Netgear M4100 Prosafe layer-2 switch. Worked fine except...
View ArticleGeneral • Re: UPnP is not working?
I think you need to set internal and external interfaces in the /ip/upnp menuStatistics: Posted by baragoon — Mon Feb 12, 2024 7:30 pm
View ArticleGeneral • Server disconnecting because it says Your IP address has changed 2...
Hi everyone,I'm having a problem, i have 2 internet providers which i configured a PCC load balance for, the problem is that i have a Koha server accesible through internet, but it logs me out because...
View ArticleGeneral • Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Hello,any progress with version 7.13.4 or are there still problems?We are thinking of buying 2 switches for the company and after reading this thread I have no confidence in CRS354.Statistics: Posted...
View ArticleGeneral • Forward SOCKS server traffic through specific interface
So, I want to enable /ip/socks proxy on mikrotik router for users in LAN but forward everything to interface other than WAN.i want forwarding to sstp clint vpnI do not see anything related to this in...
View ArticleBeginner Basics • check my settings
Halo.Please check my settings.Thank you.Code: # 2024-02-12 18:45:17 by RouterOS 7.12# software id = 4NGD-NHR9## model = RBD53iG-5HacD2HnD# serial number = <edit>/interface bridgeadd...
View ArticleGeneral • Re: Forward SOCKS server traffic through specific interface
This maybe? viewtopic.php?t=196205#p1002536Statistics: Posted by optio — Mon Feb 12, 2024 7:59 pm
View ArticleGeneral • Re: How has been your experience with DoH?
Certificate download can be little difficult.What i do:Disable my local firewall like Kaspersky or what you use, it can filter out all script and more...I Use Firefox, open:...
View ArticleGeneral • Re: Working with Mikrotik and Netgear Prosafe Layer-2 switches
Looking at it seems like a viable basic smart managed switch. Does VLans just fine and yes don't use vlan1 to pass data.Use tagged ports to pass vlans between smart devices.Use access port so pass...
View ArticleClik here to view.
Announcements • Re: v7.14rc [testing] is released!
Also not working for me. Tried with Windows PC and Android. Not uppercase/lowercase issue for me. Share can be seen, but can't access.It still doesn't work for me... Windows clients see the share but...
View ArticleBeginner Basics • Re: Tilde sign in Terminal (Mac)
How is this ROS related topic? Key combination for such character can depend on keyboard layout for specific language or you can get tilde in other apps on text input, like TextEdit, but you cannot in...
View ArticleGeneral • Re: Server disconnecting because it says Your IP address has...
Because of this:per-connection-classifier=both-addresses-and-portsSkip ports part or it will result in a possible different WAN to be chosen.You want all connections from source A towards source B to...
View ArticleBeginner Basics • Re: check my settings
And what is there to check ?What do you want it to do ?What does work ? What does not work ?You need to be a bit more specific with your question.Statistics: Posted by holvoetn — Mon Feb 12, 2024 8:39...
View Article