General • Re: NAT action SAME behaves just like NETMAP?
You are correct, that it behaves identical to netmap, netmap originally was 1:1, but some point in the Linux Kernel chanelogs (I do not know the version number), netmap supported 1:Many.Netmap/Same...
View ArticleGeneral • Re: feature request: add Port List to firewall
I doubt it will reduce number rules it they are correctly written, since you can literally add list of ports and range in single rule, unless you mean that port list can contain protocol also, but...
View ArticleBeginner Basics • Re: Port forwarding help
An Endpoint (combination IP address and port) is unique, hence you can only forward a port once.To options to handle this situation:different IP addressdifferent portAs the port is fixed (by Steam),...
View ArticleWireless Networking • Re: Auto channel and client handling
Ok, in my old config I set the Frequency manually and it works as long as my neighbors fritzbox etc changes the channel and I got weak signals... So I want to let them find the config itself. Can I...
View ArticleBeginner Basics • Re: Worth it to change private IP address early in setup...
Mea culpa.Found a typo in the address range for one of the IP pools. With that corrected and lease hold time set to one minute, transition to new subnet completed quickly.Statistics: Posted by...
View ArticleAnnouncements • Re: v7.13 [stable] is released!
I tested this version on my CCR 1016 where MPLS and VPLS {LDP} is running. After 3 to 5 minutes router reboots and it keeps repating over and over. On version 7.12.1 everything is ok. Has anyone same...
View ArticleBeginner Basics • Re: Speed and CPU issue with HEX s
As I indicated in my previous post: your current config expects ISP to talk via tagged VLAN with VID=15:/interface bridge vlanadd bridge=bridge1 tagged=bridge1,ether1 vlan-ids=15But is it? If it's not...
View ArticleRouterBOARD hardware • Re: Default password sticker wrong!!!
F1ReB4LL you won't believe this but I got the other end of this sticker.Just received my unit and after a hard reset, my default password on the sticker did not work!!!After some googling I found you...
View ArticleBeginner Basics • Re: access to winbox from wireguard
It was my mistake. I was trying to access mikrotik through winbox using the wrong ip addressStatistics: Posted by pasin — Mon Jan 29, 2024 2:04 pm
View ArticleGeneral • Re: Feature requests - CHR on Bare Metal for faster Network throughput
CPU PCI-E lanes can't handle/sustain that speed - other factors will be problem too ( example: LATENCY ). The ASR9K/NCS series can do that kind of job. ASR9x and similar models nowadays act more like...
View ArticleGeneral • Re: currently-untagged contradicts untagged
> includes also ports which are implicitly untagged members of that VLAN (e.g. because they have PVID set in /interface/bridge/portIs that so? Even when vlan-filtering=yes and...
View ArticleRouterOS beta • Re: v7 MPLS hardware offload?
Hello, even in the last beta versions there is no sign that things will continue here. @Mtik: Is the topic no longer being worked on?regards,glueckStatistics: Posted by glueck05 — Mon Jan 29, 2024...
View ArticleWireless Networking • Re: L009UiGS-2HaxD-IN and external antennas?
There was a thread about this (on Ax3, but the essence is the same) a few days ago:viewtopic.php?t=203575The connector on Mikrotiks is a RP-SMA male (and the antenna has the corresponding female) so...
View ArticleGeneral • Re: Which MikroTik?
I think you should provide more data in order to find a suitable device.Which speed does the connection have?Which kind of ethernet cable?Are you trying to save as much money as possible or you prefer...
View ArticleWireless Networking • Re: 5GHz channels disappeared on hAP ax2
Bad blocks of 0.1% is a little unexpected?Code: [admin@ROUTER001] > /system/resource/print uptime: 2h1m14s version: 7.13.3 (stable) build-time: Jan/24/2024 13:16:46 factory-software: 7.5...
View ArticleBeginner Basics • Re: CRS326-24S+2Q+RM Can't access LAN devices
Updated : Just switch the RouterOS to SwitchOS and it is working again.Some time simple is the best...But the fan just keep running at 100% speed, kind of loud and I am going to replace those with...
View ArticleRouterBOARD hardware • Re: REQUEST: Support i2c SFP/SFP+ Secuential...
And I continue have a problem if I reboot or disconnect power my router - No link. I need physical reconnerc SFP from fix it.I have tried with TWCGPON657 with C00R657V2801F_V1.9.0-220404.tar firmware,...
View ArticleWireless Networking • When setting up PtMP, does internet need to be...
I need to set up a PtMP link and was planning to use RBwAPG-60ad-SA connected to two RBwAPG-60ad.I have an alternate plan to use the two RBwAPG-60ad connected to a RBwAPG-60ad-A, all of which I...
View ArticleForwarding Protocols • PPPoE server routing to internal IP address
I have a question about routing. I have a proxy server in my network and I would like to make it available to my pppoe clients via internal IP address. The server's address is 192.168.77.1, I made a...
View ArticleWireless Networking • Re: Nray setup
Firewall config on your computer?Statistics: Posted by gotsprings — Mon Jan 29, 2024 4:24 pm
View Article