General • Re: OpenVPN DCO problem with ROS v7.13.1
Can you add Code: disable-dcoTo the client config?Statistics: Posted by vingjfg — Sat Jan 27, 2024 7:18 pm
View ArticleRouterBOARD hardware • Re: REQUEST: Support i2c SFP/SFP+ Secuential...
Hi!I installed the latest beta 7.14beta8 on my hap ac (RB962UiGS-5HacT2HnT). I use SFP ONU C-DATA FD511GX-RM0 with firmware: V2801F_V1.9.0-220425 working on CPU: RTL9601CI.But couldn't see EEPROM DATA...
View ArticleGeneral • Re: Some computers cannot connect to 5g wifi some can and wifi 2.4...
Hi and thanks for the replyhow can I do this:"Check if the used frequency is possible for those computers"And how can I do this "Try a lower channel"Sorry in routers I am totally newbee Thanks for...
View ArticleThe Dude • Dude on 5009
Hi,got a (my first) 5009, and tried to run dude on it. It is installed, enabled, running. But I can not figure out how to get a discovery running/started.All docs I found are either outdated, or...
View ArticleWireless Networking • Nray setup
i can get to Winbox v 3.40, type in connect to, login, password but it repeatedly times out. it keeps retrying but won't connect. I tried all 3 connect to addresses, did with and without password and...
View ArticleWireless Networking • Re: Persistent Wi-Fi Disconnection Issues with Mikrotik...
Pretty much the same experience. 5G wifi becomes unusable every day or two, 2.4G is too noisy or unstable for some other reason.Statistics: Posted by andresl11111 — Sat Jan 27, 2024 10:06 pm
View ArticleGeneral • Reverse Porxy doesn't work without 2nd masquerading for specific IP
Hi everyone,I hope someone can help me on this one. I'm strungling to understand why the masquerading for the web/mail VM server (add action=masquerade chain=srcnat src-address=172.16.20.12) is...
View ArticleBeginner Basics • Re: CRS112 Router Throughout Issue
so is it a ROUTER or is it a SWITCH??Even a cisco asa 5506x is able to shoot heavy loads through such a small case.Please Mikrotik, make a decision! Either CRS and it delivers enough performance, or...
View ArticleGeneral • fetch now fills logs 7.13.3
I just updated to 7.13.3 on a ccr2116. I have a scheduled fetch command I run with output=none but now I'm getting a fetch,info log 'Downdown from x FINISHED' and it's poluting my logs. This isn't the...
View ArticleGeneral • Re: fetch now fills logs 7.13.3
Edit in system logging info topic log rule and add !fetch there.Statistics: Posted by optio — Sat Jan 27, 2024 10:39 pm
View ArticleGeneral • Re: Recommended for IPS/IDS
Among your list I have experience with Firewalla. An advantage is that today the IDS/IPS cost is in the capital for the box, not ongoing. That is not guaranteed to continue. Firewallas are also easy...
View ArticleGeneral • Wireguard on Windows (client), no gateway, can't ping router
Hi, I've configured Wireguard on Mikrotik, I can connect to it, but the PC gets 0.0.0.0 as gateway, wrong config on client?Also, I have a /24 on both sides, but I can't ping the router IP on the same...
View ArticleRouterBOARD hardware • Re: CCR1009 - connecting to console port using Cisco...
Thanks for everyone's help especially TRKK. TRKK saved me the time of doing the mapping.I finally had time to come back to this.Statistics: Posted by garymikrotik — Sat Jan 27, 2024 11:22 pm
View ArticleBeginner Basics • Re: VLAN question
You have interface lists in the setup part you posted (LAN with several members, configured wrongly, and WAN with no apparent member). What's the story about them? Posted config doesn't seem to be...
View ArticleBeginner Basics • Re: No IPv6 Internet on CRS326, IPv4 works.
Parameter add-default-route on DHCPv6 client is a MT hack and should be disabled.DHCPv6 (unlike DHCPv4) doesn't provide gateway information, RAs provide that info. What the parameter mentioned does is...
View ArticleBeginner Basics • Re: CAPsMAN, DHCP Server, Wireless to wifi-qcom-ac, etc.
Why do you need IPv6 if IPv4 still works for you ?A short while ago I've got information that google cloud is giving only IPv6 addresses for certain cloud infrastructure. So I guess we are starting to...
View ArticleGeneral • Re: Route all requests from Interface A to IP address of Interface...
Sorry for the wait, I decided to do this on the weekend so I have more time. I have attached two files:original.rsc - this is my original configuration as described in first post, just on the test...
View ArticleGeneral • Re: Reverse Porxy doesn't work without 2nd masquerading for...
When doing DST NAT with certain new destination address (in your case 172.16.20.12) the problem arises when client connecting to NAT-ed service resides in same IP subnet as destination address. In...
View ArticleBeginner Basics • Re: CRS112-8g VLAN challenges
There is a dedicated page for this switch:https://help.mikrotik.com/docs/pages/vi ... =103841836Think (can't see your current config yet) that you used VLAN filtering on the bridge, but to get better...
View ArticleBeginner Basics • Re: Chose cloud for Mikrotik CHR
I don't have CHR experience with AWS, Digital Ocean, LightNode, or Google Cloud.I can personally recommend: - Vultr (by default they have UEFI but it can be changed and CHR runs fine), they even can...
View Article