Beginner Basics • Re: Can't connect to my cloud switch
do you think you could supply the config of your router?Statistics: Posted by JazzMaster — Fri Jan 26, 2024 4:35 pm
View ArticleGeneral • Re: And again L2TP+IPSec 'wrong password' when password is fine
Any ideas, please?Statistics: Posted by EIKA — Fri Jan 26, 2024 4:47 pm
View ArticleBeginner Basics • Re: WiFi client isolation with VLANs and remote gateway
I've been trying running my hAP ax2 is an AP + gateway (the typical home router setup), but now I'm looking to change it to serve as an access point with a remote gateway (a pfSense firewall I got...
View ArticleRouterBOARD hardware • Re: MikroTik cAP ax [cAPGi-5HaxD2HaxD] (r2)
Hi, may I ask what's the maximum distance in meters that allow a client to reach the wifi6 network of a cAPGi-5HaxD2HaxD?i.e. competitor says 140 m² (1,500 ft²) coverageThanks, BRStatistics: Posted by...
View ArticleBeginner Basics • Re: RB5009 switch ACL ports=switch1-cpu not filtering
It seems there might be an issue with the RB5009 switch ACL configuration for the "switch1-cpu" ports, as they are not currently filtering as expected. To troubleshoot and resolve this matter, you may...
View ArticleGeneral • Re: Howto mark Amazon AWS traffic?
Hi EIKA,here is s Powershell script which fetches the latest file from Amazon and converts it into a importable file for MikrotikYes, I know how to do that one time. Text editor and a few regexps,...
View ArticleBeginner Basics • Re: I bought the wrong access points...
What makes you think they don't work in Germany? Provide full model code from sticker and also configuration you applied.As soon as I apply a config with Germany as country, all frequencies, all...
View ArticleClik here to view.
Beginner Basics • Router blocks communication
I just bought a router based on recommendation from the ones that installed my system in the house (two AP).After the switch of router there is one thing that doesn't work and it seems to be a common...
View ArticleBeginner Basics • Re: Router blocks communication
Typically outgoing, there should not be a lot which gets blocked. Unless you changed it (or someone else).What type of router are you using and how does the config look like ?How is that Plejd device...
View ArticleWireless Networking • NetBox 5 ax
Hi guys, maybe Mikrotik staff like @Normis can answer this. Will the new Ax series allow outdoor nv2 protocol? If no, will Mikrotik support this protocol in the future?I don't think 802.11ax is made...
View ArticleGeneral • CCR2004-16G-2S+ and Downgrade
HelloI upgraded to the current Beta, but I am having issues where my modem is crashing. I want to downgrade to confirm if it is an issue with the router, or if its a bad modem from Bell Canada.I put...
View ArticleClik here to view.
Beginner Basics • Help with routing offload to switch chip
I'm attempting to configure the CRS354-48P-4S+2Q+RM to be used as a router and switch. Its gateway of last resort goes to the firewall which decides on further routing. I am using the CRS328-24P-4S+RM...
View ArticleRouterBOARD hardware • Re: New hAP ax lite LTE
Received mine, and I am quite happy for now.One thing that worries me... The power LED does not light. Is there any way I broke it with configuration? I did a reset without default for a clean...
View ArticleGeneral • Re: AutoUpgrade via /system/upgrade/download-all does not work
Might it be an problem that the files are within a subdirectory of the USB?IMO this is very likely. You may want to open issue with MT support asking them to provide detailed description (or example...
View ArticleBeginner Basics • Re: log files limited to 2 on my RB4011
I agree with Jotne. In my case, every night, I have a script that ftp the log files to my file server (along with the config export and backup files).One of these days I will work on...
View ArticleGeneral • Can not do factory reset on my HEX.
Can not do factory reset on my HEX.Reset my HEX?I use the normal way: PowerOn->Hold Reset->Wait for flashing->Release.It wont reset anything.Then i put it in netinstall: PowerOn->Hold...
View ArticleGeneral • Re: UDP NAT connection tracking requirements?
Connection tracking generally assumes that bi-directional communication flows between same ip:port pair. In your case between 192.168.1.2:29999 and 192.168.20.2:29999 ... and in both directions. If...
View ArticleGeneral • Re: Filter rules
It’s used as a router and has a static IP assigned. The third party firewall performs all of the rules.I wasn't sure if I needed to have any rules set on the MikroTik firewall as well.Only for...
View ArticleBeginner Basics • Re: Multiple wired clients with same MAC addresses
The 169.254.x.x (with netmask 255.255.0.0) is an APIPA address.If the protocol is implemented correctly it should essentially:https://www.spiceworks.com/tech/network ... pipa/#_0021) look for a DHCP...
View ArticleGeneral • Re: Traffic on different bridges
CRS line of devices are switches.Having said that we can continue: yes, CRS can route (like every other device running ROS). If running recent ROS (v7.something) it can do routing with ASIC so it's...
View Article