Beginner Basics • Zerotier and routing tables

Hello all
I have two routers on a site. One is a 5G router D53G-5HacD2HnD and the other is a RB1100AHx2. All router are on 7.15.1 firmware.
Behind the RB1100AHx2 I have a set of wireless antennas and cameras at 191.168.0.0/22 at 191.168.0.1. The wan from the 5G router to the RB1100AHx2 is (DHCP auto static) at 192.168.2.253.

The RB1100AHx2 is ARM but does not support zerotier as I have tried several times without success.

I have set zerotier on the 5G router and I have set routing table to be possible to connect to ping my 191.168.0.1 and everything behind it localy.

I have added zerotier route tables to connect via my pc to connect both at my 5G router, but also my RB1100AHx2 at 192.168.2.253 as it should be.

Furthermore, I have tried countless rules to my route tables on all routers as well locally to my pc to access 191.168.0.1 and everything behind 191.,168.0.0./22
This was not successful. Do you have any ideas? Firewall rules on the 5G and RB1100AHx2 are not affecting the results.

Statistics: Posted by gkounis — Thu Jun 13, 2024 4:47 pm

---