Just installed a Cube 60Pro ac Wireless Wire pair.
This is still all new for me, however Im seeing that 60Ghz is working fine.
Distance wise from the 2 points is only 54metres according to the 60Ghz status page.
I'm finding 5ghz is connecting at really low speeds not sure why. I'm only 45metres apart.
60Ghz Status:
Freq: 66960
Signal: 80
MCS: 9
PHY Rate: 2.5Gbps
RSSI: -40 dB
TX Sector: 28
TX Sector Info: right 0.8 degrees, down 0.0 degrees
RX Sector 101
Distance 54.94m
5Ghz Status:
Channel: 5720/20-eeeC/ac/DP(15dBm)
Tx Rate: 86.6Mbps-20MHz/1S/SGI
Rx Rate: 6Mbps
Tx/Rx Signal Strength: -47/-46 dBm
Noise Floor: -105dBm
Signal To Noise: 59 dBm
Tx/Rx CCQ: 67%/62&
Overall TX CCQ: 67%
Distance: 1km.
Router OS: 6.49.13
Wanted to ask why 5Ghz is connection so slow? It was Rx/Tx both 6Mbps a few hours ago.
Distance saying 1km. Its only 45m physically apart.
I'm quite happy with 60Ghz performance, waiting for rain and winds to see if connection will be stable or not.
But just very curious about the 5Ghz connection, not sure why its so low at such small distances.
These are factory wireless wire configuration except, for me changing the passphrase on the wifis, and setting regulation to my country.
5Ghz Channel is set to Auto, Antenna Gain is 12dbi from factory.
I played around with Channel and Gain , neither made much difference.
Any ideas on why 5ghz is so slow?
This is still all new for me, however Im seeing that 60Ghz is working fine.
Distance wise from the 2 points is only 54metres according to the 60Ghz status page.
I'm finding 5ghz is connecting at really low speeds not sure why. I'm only 45metres apart.
60Ghz Status:
Freq: 66960
Signal: 80
MCS: 9
PHY Rate: 2.5Gbps
RSSI: -40 dB
TX Sector: 28
TX Sector Info: right 0.8 degrees, down 0.0 degrees
RX Sector 101
Distance 54.94m
5Ghz Status:
Channel: 5720/20-eeeC/ac/DP(15dBm)
Tx Rate: 86.6Mbps-20MHz/1S/SGI
Rx Rate: 6Mbps
Tx/Rx Signal Strength: -47/-46 dBm
Noise Floor: -105dBm
Signal To Noise: 59 dBm
Tx/Rx CCQ: 67%/62&
Overall TX CCQ: 67%
Distance: 1km.
Router OS: 6.49.13
Wanted to ask why 5Ghz is connection so slow? It was Rx/Tx both 6Mbps a few hours ago.
Distance saying 1km. Its only 45m physically apart.
I'm quite happy with 60Ghz performance, waiting for rain and winds to see if connection will be stable or not.
But just very curious about the 5Ghz connection, not sure why its so low at such small distances.
These are factory wireless wire configuration except, for me changing the passphrase on the wifis, and setting regulation to my country.
5Ghz Channel is set to Auto, Antenna Gain is 12dbi from factory.
I played around with Channel and Gain , neither made much difference.
Any ideas on why 5ghz is so slow?
Statistics: Posted by bigmac — Fri Apr 26, 2024 10:59 am